BVILY HT12Z Smart Watch User Guide
- June 12, 2024
- BVILY
Table of Contents
- Thanks for Choosing BVILY Product..
- Watch client download
- Basic parameters
- Instructions In Detail
- On / off
- Bracelet operation
- Wearing method
- Charging method
- Device connection
- Bluetooth connection, voice call and music playback
- Operation method
- Control Interface
- Menu Interface
- App functions and settings
- Reminder function
- Customers Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BVILY HT12Z Smart Watch
Thanks for Choosing BVILY Product..
BVILY was founded in 2018
We are a young and energetic team with rich innovation experience.
We are committed to providing intelligent, efficient, and simple cleaning products for every family.
Reduce cleaning time, eliminate cleaning troubles, and leave more time for your family.
Watch client download
Use your mobile phone to scan the QR code below, download and install app, or Android mobile phone directly to app treasure, apple mobile phone directly to APPLE STORE ‘search for “FitCloudPro” to download and install.
Equipment requirements: IOS 8 and above; Android 4.4 and above, supporting Bluetooth 4.0.
Basic parameters
Product Type
| Smart Watch| Battery Type| Lithium polymer
---|---|---|---
Display Size
| 1.32ch| Battery Model| 502020
Weight| 48±1g| Battery Capacity|
180mAh
Watch Size| ¢44.6*10.6mm| Charging Voltage|
DC 5V
Waterproof Level
| IP67| Battery Power| 0.666Wh
Wristband Material| RUBBER/ Mesh belt| Package Contents|
Smartwatch, manual, charging cable
Instructions In Detail
On / off
- When the bracelet is turned off, charge or long press the button above to turn the bracelet on.
- Or long press the top button on the main interface to slide the screen left to shut down.
Bracelet operation
- When the bracelet is turned on, press the key or raise your hand to light up the screen, and click or slide to switch the display.
- Without operation, the screen will be off for five seconds by default. Users can connect to the mobile app to modify the screen off time.
- By default, the bracelet turns on incoming calls and SMS reminders, and selects on or off in the main interface of the app.
Wearing method
- The bracelet is best worn behind the styloid process of ulna.
- Adjust the size suitable for the wrist according to the adjusting hole and fasten the wrist buckle.
- The sensor shall be close to the skin to avoid movement.
Charging method
For the first time, please take out the bracelet and charge the equipment with the corresponding charger. When charging, The bracelet will turn on automatically.
Device connection
After clicking OK, the device will switch to app access permission and select the function that allows app access permission (it is recommended to open all according to user requirements)
Bluetooth connection, voice call and music playback
Voice call and music playback: Slide the screen to turn on the main
switch of call function , turn on the
Bluetooth search function of mobile phone, find “HT12Z – *” and connect
it. After successful connection, it can be used normally.
Note: it is recommended to turn off the voice and music playback function
when not in use to save power.
“HT12Z – *” and connect it. After successful connection, it can be
used normally.
Note: it is recommended to turn off the voice and music playback function
when not in use to save power.
Bluetooth connectivity: After successful pairing, the app automatically saves the Bluetooth address of the bracelet. When the app is opened or running in the background, it will automatically search and connect the bracelet.
Data synchronization: Click “drop-down” on the app home page to synchronize data; The bracelet can store offline data. The more data, the longer the synchronization time. After synchronization, there will be a prompt of “synchronization complete”.
Operation method
- In the dial interface, long press the screen to enter the main interface for switching.
- On the dial interface, draw from right to left to enter the steps, heart rate and other interfaces. You can also add and subtract menus.
- In the dial interface, click from top to bottom to enter the control interface.
- In the dial interface, click from left to right to enter the menu style (three styles in total).
- In the dial interface, click from bottom to top to enter the information list interface.
- Click the upper right button to enter the menu options. Click the lower right button to enter the sports shortcut mode.
Main Interface
The bracelet has multiple main interfaces. Long press the screen on the main
interface to switch the interface.
Note: the last dial can be customized and edited in the app dial
interface.
Steps, Heart rate, Sleep and Other Interfaces
Step Counting
View the status of current steps, distance and consumption.
Heart Rate
The green light at the bottom starts to measure, and the measurement is completed in about 30 ~ 60 seconds. The measured value is based on PPG Technical measuremen.
matters needing attention:
- during the test, the heart rate led on the back of the bracelet will flash.
- the sensor shall be close to the skin to avoid external light affecting the accuracy of the test.
- keep the test area clean. Sweat or stains will affect the test results.
Sleep
The sleep monitoring status of the day is displayed, and the data is updated
every day. The specific data can be synchronized to the app for viewing.
Note: only when you wear a bracelet to sleep can you have sleep data.
Motion
It includes many sports modes such as walking, running, mountaineering and cycling. At the same time, some sports modes are added .
Control Interface
Do not disturb mode: After this function is enabled,
there will be no message prompt. Red is on and gray is off.
Brightness Adjustment: Adjust the brightness level of the screen display.
The default brightness level is “3””
Dialing Function: Click enter to make a call.
Audio Switch: Turn on this function and successfully
connect the mobile phone. You can use the call and bracelet to play music
normally.
Setting: Click to enter the setting interface.
Including (menu style, screen display, battery, vibration intensity
adjustment,
language, password, system, system information, shutdown and factory reset).
Menu Interface
Dial: Click enter to make a call
Top contacts: Click to enter common contacts
Call log: Click to enter the call record
Data: Click enter to view the step count, kcal and
KM data
Motion: Click enter to switch relevant sports modes
Motion recording: Click enter to view the sports
record
Heart rate: Click enter to measure heart rate
Sleep: Click enter to measure sleep
Blood pressure: Click enter to measure blood pressure
Blood oxygen: Click to enter and measure blood oxygen
Information: Click enter to view the information
Weather: Click enter to view the weather
Female sex: Click enter to view relevant records When registering, the
gender is “female”, and this function can be turned on normally
Music: Click enter to control music. The mobile phone needs to open the
music player to control
Stopwatch: Click enter to use the stopwatch
Timer: Click enter to use the timer
Tlarm clock: Click enter to set the alarm clock
Find phone: Click to enter to find the mobile phone, and a ringing tone
and vibration prompt will be sent out
Set up: Click to enter and make relevant settings
App functions and settings
Personal information and sports goals
Please set your personal information after entering the app My → click Avata
Avatar – name – ID – birthday – gender – height – weight can be set. Personal
information can improve the accuracy of data.
- Customizing individual daily exercise goals and reasonable exercise planning ar e conducive to the improvement of physical quality.
Reminder function
Message reminder: At the app end, it can be opened separately or with one
key. When the message is received, the bracelet vibrates and displays the
content.
Watch alarm clock: Set multiple groups of alarm clocks. In case of alarm,
the bracelet will initiate vibration reminder and support offline alarm
reminder.
Sedentary reminder: The default reminder interval is 1 hour; After
opening, if the user does not exercise within 1 hour, the bracelet will
vibrate to remind the user to exercise.
Drinking water reminder: The default reminder interval is 2 hours; After
opening, if the user does not exercise within 1 hour, the bracelet will
vibrate to remind the user to drink.
Dial Library: Click to set the dial. Dial 5 can be customized and
replaced. Click OK after replacement, More dials recently launched.
Local dial: Click to view and set the dial downloaded from the mall.
Weather push: It is on by default. After it is off, the bracelet will not
be able to view weather information.
Wristband bright screen: You can set the on (off) wrist lifting bright
screen and customize the on time.
Enhanced heart rate measurement: It can strengthen the test of heart
rate.
Continuous monitoring: Turn on (off) and customize the monitoring time.
After opening, the life of the bracelet will also be reduced.
Find watch: After clicking, the bracelet vibrates. (no vibration at low
power).
Wearing mode: You can choose to wear it with your left hand or your right
hand
Time format: 12 / 24 hour format can be selected.
Top contacts: You can add contacts to sync to the bracelet.
Shake it and take a picture: After entering the function, click the
bracelet screen and shake the bracelet to control the mobile phone to take
photos.
Device version: Users can check the update of Bracelet software version
by themselves.
Restore factory settings: The bracelet can be restored to the factory
state.
Unbinding equipment: Click to remove the current device at the app end.
Charging reminder: When the bracelet is charged, the motor vibrates, and
the bracelet does not vibrate when the battery is low or full.
matters needing attention
- please avoid strong impact, extreme high temperature and exposure to the sun.
- do not disassemble, repair or modify the machine by yourself.
- the machine is charged with 5V 500mA (charger is recommended). It is strictly prohibited to charge with overvoltage load power supply.
- the operating environment of the machine is 0 ~ 45 degrees. It is forbidden to throw it into the fire to avoid explosion.
- when the bracelet is stained with water, please dry it with a soft cloth before charging, otherwise it will corrode the charging contact point and cause charging failure.
- do not touch chemicals such as gasoline, cleaning solvents, propanol, alcohol or insect repellents.
- do not use this product in high voltage and high magnetic environment.
- if you have sensitive skin or wear the bracelet too tightly, you may feel uncomfortable.
- please wipe the sweat drops on your wrist in time. If the watch strap is exposed to soaps, sweat, allergens or polluting ingredients for a long time, it may cause skin allergy and itching.
- do not wear a bracelet to take a hot bath.
- after swimming, please wipe the bracelet in time to keep it dry.
common problem
The waiting time for the first test of heart rate is too long?
To test your heart rate for the first time, you need to collect longer signals according to different people in order to accurately calculate your heart rate.
What if Bluetooth is not connected? (connection / reconnection fails or connection reconnection speed is very slow)
- one Due to the problem of signal interference in Bluetooth wireless connection, the time of each connection may vary. If it takes a long time If the connection fails, please ensure that the operation is carried out in an environment without magnetic field or interference from multiple Bluetooth devices.
- Turn Bluetooth off and on again.
- Close the background application of the mobile phone or restart the mobile phone.
- Do not connect other Bluetooth devices or functions at the same time.
- Whether the app operates normally in the background. If it is not in the background, it may not be connected.
The reminder function has been turned on. Why didn’t you receive the reminder?
Android mobile phone: confirm that the mobile phone is connected with the bracelet. After connecting, open the corresponding permissions in the mobile phone settings, allow the “fitcloudpro” app to access incoming calls, SMS and address book, and run “fitcloudpro” in the background; If the phone has security software installed, please add “fitcloudpro” as a trust. Apple mobile phone: if there is no reminder after connecting, it is recommended to restart the mobile phone and reconnect. When connecting the bracelet again, you must wait for the mobile phone to pop up the [Bluetooth pairing request] and click [pairing] before there is a reminder.
Is the bracelet waterproof?
It supports IP67 waterproof and dustproof grade. It can be worn freely when washing hands, raining, cold shower and car washing.
Does the Bluetooth connection need to be on all the time? Is there any data after disconnection?
Monitoring mode, automatically detect your sleep duration and calculate your sleep quality; Sleep data can only be viewed on app side temporarily.
Customers Support
If you have any questions,
We are here to help!
Manufacturer after-sales support
E-mail: bvilyservice@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>