air base AutoPot 25L AirBase Square Fits Instruction Manual

air base AutoPot 25L AirBase Square Fits Instruction Manual

Models

AirBase Square fits AutoPot 8.5L / 2.2 gal and 15L / 3.9 gal plastic pots as used in 1Pot modules (pictured) and easy2grow modules

AirBase Round fits AutoPot 25L / 6.6 gal plastic and 20L / 5 gal fabric pots as used in XL and XL FlexiPot modules

PRODUCED FROM TOUGH ABS PLASTIC – EXTENSIVELY REUSABLE

AIRBASE SQUARE FOR: AutoPot 8.5L / 2.2gal & 15L 3.9gal plastic pots

AS USED IN:

AIRBASE ROUND FOR: AutoPot 25L / 6.6gal plastic & 20 L / 5gal fabric pots

AS USED IN:

SETUP GUIDE

Follow directions below for AirBase Square and AirBase Round

1. Prepare your pots with root control as usual. Refer to your system instructions for relevant guidance.
   If using AirBase without AirDome go to Step 2 If using AirBase with AirDome go to Step 3

2. If using without AirDome
   Place AirBase into the base of your pot.
   **Go to Step 5

   ---

   **

3. If using with AirDome
   Remove AirBase centrepiece.
   Place AirBase over your assembled AirDome
   Ensure air pipe is fitted into notch on underside of AirBase.

4. If using with AirDome
   Lower the AirDome and
   AirBase into pot. Ensure air pipe is fitted into the notch on the side of the AirBase.
   Your air pipe routes up over the pot edge to your air pump.

5. All configurations
   Pour a small amount of medium into the pot (5a). Push the medium down through holes in the Base (5b) – this is essential for capillary action to occur
   
   

6. All configurations
   Fill pots with medium and pot up plants. Water through pots and allow to drain outside the tray.
   Once drained place pots into your module trays.
   

@AUTOPOT_GLOBAL

@AUTOPOTSYSTEMS

 AUTOPOT.CO.UK

References

• Power Free, Indoor & Outdoor Watering | AutoPot Watering Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>