A4x CK1 2K Smart Home Security Camera User Guide
- June 12, 2024
- A4x
Table of Contents
A4x CK1 2K Smart Home Security Camera
What’s in the Box
-
Camera (With mounting bracket)
-
Pack of Screws
-
USB Cable
-
Power Adapter
-
Mounting 3M Tape
-
Quick Start Guide
Product Diagram
① Indicator Light
② Camera Lens
③ Microphone
④ Speaker
⑤ Type-C Power Port
⑥ Reset Button
⑦ MicroSD Card Slot
⑧ Mounting Hole
⑨ Mounting Bracket
Light Indicators
| Light Status | Camera Status |
|---|---|
| Quickly flashing blue light |
- The device is connecting
- The device is upgrading firmware
Solid blue light| The device is working properly
Flashing blue light| The device failed to connect
Blue light off| The device is in sleep mode or powered off
Quick Start
Download And Install
The camera supports both Android and iOS app. For your best experience, please
download and install the app with your mobile phone as instructed below, and
complete the user registration process in the app.
a) Go to the following link in your system browser to download:
app.vicohome.io
OR
b) Scan the QR code to go to the link:
CAUTION DO NOT use 3rd party QR code scanning tool or app to avoid scam or malware. Use QR code scanning app provided by your mobile phone system, e.g., the system camera app
Add The Device
Connect the camera to a power outlet and wait for 20 seconds or until the
indicator light turns to quickly flashing blue. Add the device according to
the prompts (please bring the device close to the router when configuring).
Bind The Device
-
Click the “Add Now” button in the app. The app will automatically search for devices that are on and not bound. Select the device you want to bind in the search results for the next step;
-
Enter the name and password of the Wi-Fi network you want the camera to connect to. Click “Next” after completion, and the app can try to connect the camera to the Wi-Fi.
-
After a while, the camera will play a sound indicating that the connection is successful. At this point, please set a name for the camera on the app and select the location where you want to place the camera. Click Finish to complete the pairing.
Possible problems with binding
- When you hear the “Wi-Fi Password Error”, please check whether the Wi-Fi password you entered in the app is correct;
- When you hear the “Authentication error”, please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2;
- When you hear the “Wi-Fi not found”, please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on. Please note that 5Ghz Wi-Fi cannot be searched by the device;
- When you hear the “Retrieving IP timeout “, it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator;
- When you hear the “Cloud service connection fail”, please check whether your router is connected properly to the external network. When you hear this error prompt, it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network connection is normal, and try to temporarily turn off the firewall to connect again.
Install The Device
Please install the camera in a position where its view will not be blocked, make sure it is within the coverage of the Wi-Fi network.
The device can be placed on a shelf or other surfaces to use, and also can be installed on a wall.
You can install the camera on a wall by below two methods listed. Choose the one that suits your needs.
- Use 3M Tape
a) Remove one side film of 3M tape and stick 3M tape to the device.
b) Remove another side film of 3M tape and stick the device to the wall, rotate the camera to the position you want to see.
- Use Mounting Screws
a) Push the mounting bracket out from the camera.
b) Install the mounting bracket in the desired position with screws, the word “UP” can be seen after installation.
c) Mount the camera onto the mounting bracket. And rotate the camera to the
position you want to see.
Firmware Upgrade
When you connect your camera through the app, it will prompt you if the latest firmware is available. You can also manually check the firmware version in the settings of the app.
Note Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/ TV technician for help. To maintain compliance with FCC’s RF Exposure
guidelines.
This equipment shall be installed and operated with minimum distance 20cm
between the radiator and body.
FAQ
Q: Camera permission management: How to invite family members or friends
to use my camera together?
A: Open the App and select your camera on the home page. Click the share
button on the home page or the “Share” in the camera settings to enter the
sharing page, and then click “Invite ” to generate a QR code. Your friends
can now get some of the access rights by scanning the QR code in your phone.
Q: Why doesn’t the Wi-Fi name appear when I connect to Wi-Fi?
A: On Apple devices with iOS13 and above, you need to turn on the
“location permission” for the app in the system settings and change it to
“allow when using”.
Q: What are the requirements for Wi-Fi?
A: Please use a 2.4 GHz wireless network. The camera does not support the
5 GHz wireless network. Meanwhile, please set the Wi-Fi authentication method
to a security method below wpa2-psk, which requires a password.
Q: How can I review videos in a quick and categorized way?
A: Click the icon on the top left corner of the “Library” screen to
set filtering conditions, check the conditions and save them to quickly review
the video playback by category.
Q: What should I do when the camera acts abnormally?
A: Remove the power outlet from the device and re-connect the device to
it again for re-boot the device.
AI for everyone and everything.
Documents / Resources
| A4x
CK1 2K Smart Home Security
Camera
[pdf] User Guide
2AUDF-CK1, 2AUDFCK1, CK1, CK1 2K Smart Home Security Camera, 2K Smart Home
Security Camera, Smart Home Security Camera, Home Security Camera, Security
Camera, Camera
---|---
| A4x
CK1 2K Smart Home Security
Camera
[pdf] User Guide
CK160C, 2AUDF-CK160C, 2AUDFCK160C, ck160c, CK1, CK1 2K Smart Home Security
Camera, 2K Smart Home Security Camera, Smart Home Security Camera, Home
Security Camera, Security Camera, Camera