WENTEX 100x25cm Set Frame H-Module Instruction Manual
- June 12, 2024
- WENTEX
Table of Contents
WENTEX 100x25cm Set Frame H-Module
Package Contents
Before starting the assembly process, ensure that you have received all the necessary parts included in the package. The package should contain:
- SET Frame H-Module components
- Enclosed Allen key
Assembly Instructions
Assembling this SET frame module is very easy. You only need the enclosed Allen key. After unpacking, lay all the parts on the floor and follow the instructions below. More information about our SET frame modules can be found by scanning the qr code at the bottom of this page.
Assembling the SET Frame H-Module is a straightforward process. Please follow the steps below:
- Unpack all the components and lay them on the floor.
- Arrange the parts in the following order, ensuring that the supports are positioned 30cm from the top and 30cm from the bottom.
- Attach the supports using the keder angle profiles, positioning them 30cm from the top and bottom.
- Slide the keder profiles into the frame at the top-left and bottom-right corners.
Your SET Frame H-Profile is now ready!
For more detailed information about our SET Frame modules, you can scan the QR code located at the bottom of this page.
Note: Attach the stickers provided behind the lowest wingnut only when the strip is exactly inside the frame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>