VETTER 2 Loops Cable Supporting Grips Instructions
- June 12, 2024
- VETTER
Table of Contents
VETTER 2 Loops Cable Supporting Grips
Technique for cable laying and overhead line construction
- Energy cable laying up to 680 kV
- Fibre optic, mini and micro cables
- Cable winding and length measuring
- Overhead line construction up to 110 kV
- Seminars and product instructions
Cable supporting grips, 2 loops
Cable supporting grips with 2 loops, galvanized Bowden wire. All Vetter cable grips are handmade therefore of high flexibility. They adapt easy at any difference in cable diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length are available. Grips made of stainless steel see further below. For safe and strain-relieved cable support.
- L1 = the lengths without cables in. L2 = total length including the loops.
- The real length mounted on the cable can be much shorter, depending on the cable diameter.
- Loops without thimbles
- B = internal diameter of the loop
- D = thickness of the loop
- kN = minimum breaking load at equal pull on both loops
| Code | Type | C-D | B | D | kN | L1/L2 | kg |
|---|---|---|---|---|---|---|---|
| 251071 | KM 15/2 | 12-15 | 30 | 2 | 6,3 | 180/400 | 0,02 |
| 251091 | KM 19/2 | 15-19 | 30 | 2 | 7,8 | 220/450 | 0,04 |
| 251121 | KM 25/2 | 19-25 | 35 | 2 | 7,8 | 275/530 | 0,05 |
| 251161 | KM 30/2 | 25-30 | 35 | 3 | 12,0 | 350/630 | 0,06 |
| 251171 | KM 40/2 | 30-40 | 50 | 3 | 17,4 | 370/680 | 0,12 |
| 251191 | KM 50/2 | 40-50 | 50 | 3 | 24,0 | 490/800 | 0,12 |
| 251201 | KM 60/2 | 50-60 | 50 | 3 | 24,0 | 500/840 | 0,28 |
| 251211 | KM 70/2 | 60-70 | 50 | 4 | 31,8 | 520/890 | 0,30 |
| 251221 | KM 90/2 | 70-90 | 50 | 5 | 41,7 | 580/900 | 0,35 |
Vetter GmbH Kabelverlegetechnik • Industriestraße 28 • D-79807 Lottstetten
- Tel.: +49 7745/9293-0
- Fax +49 7745/9293-499
- info@vetter-kabel.de
- www.vetter-kabel.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>