evolur 478 Infinity Convertible Stroller Instruction Manual
- June 12, 2024
- evolur
Table of Contents
evolur 478 Infinity Convertible Stroller
Product Information
The product is a baby stroller designed for infants from 0 to 6 months old. It features a cozy and fashionable design, ensuring the comfort and safety of your child. The stroller comes with a footrest for your child’s comfort, but it is not designed to support extra weight, so it is important not to allow children to stand or sit on the footrest. The foot barrier must be used for babies aged 0 to 6 months.
The stroller also includes a backrest that can be adjusted for reclining. When the child is sitting in the seat, it is important to support the backrest as it reclines. If you have difficulty adjusting the backrest, you may need to remove the child from the seat to make it easier to raise or lower the backrest.
For safety, it is recommended to always use the harness provided the stroller. The harness is a five-point harness that restrains your child securely. To secure the child in the harness, the steps carefully:
- Disconnect the shoulder straps from the waist strap and buckle when not in use to prevent strangulation.
- Separate the buckle tongues for added safety.
- To secure the child in the harness, reconnect the buckle tongues.
Product Usage Instructions
- Make sure to register your product by scanning the QR code provided or visiting https://www.evolurbaby.com/customer-care/product-registration/.
- Keep these instructions for future reference.
- Ensure that the foot barrier is used for babies aged 0 to 6 months.
- When adjusting the backrest, remove the child from the seat if you have difficulty raising or lowering it.
- Always use the harness provided. Disconnect the shoulder straps from the waist strap and buckle when not in use to prevent strangulation.
- Separate the buckle tongues for added safety and secure the child in the harness by reconnecting the buckle tongues.
For any questions, concerns, or feedback, you can chat with us or follow us on social media:
- Follow us on Instagram: @EvolurBaby
- Follow us on Twitter: @evolurbaby
You can also enter our monthly giveaway by scanning the provided QR code.
Scan the QR code to register your product
https://www.evolurbaby.com/customer-care/product-registration/
Important: Keep these instructions for future reference.
Safety Information
WARNING
Thank you for choosing Dream On Me and congratulations on joining The DOM
Family, a family that has been transforming lives for 30 years! We appreciate
your feedback and wish you the very best in the coming years with your new
addition. If you have any questions or concerns please don’t hesitate to reach
out and a trusted DOM representative will assist you. Thank you again for
entrusting us to supply you with the safest, functional and affordable baby
products and accessories. Feel free to follow us on Facebook and Instagram for
further opportunities and offers. Failure to follow these warnings and the
assembly instructions could result in serious injury or death.
- ADULT ASSEMBLY REQUIRED.
- NEVER LEAVE CHILD UNATTENDED. Always keep child in view while in stroller.
- AVOID SERIOUS INJURY from falling or sliding out. Always use seat belt. After fastening buckles, adjust belts to get a snug fit around your child.
- AVOID FINGER ENTRAPMENT: Use care when folding and unfolding the stroller. Be certain the stroller is fully erected and latched before allowing your child near the stroller.
- NEVER USE STROLLER ON STAIRS or escalators. You may suddenly lose control of the stroller or your child may fall out. Also, use extra care when going up or down a step or curb.
- DO NOT place items with a string around your child’s neck, suspend strings from this product, or attach strings to toys.
- USE OF THE STROLLER with a child weighing more than 40 lb (18 kg) or taller than 45 inches(114.3cm) will cause excessive wear and stress on the stroller. Use the stroller with only one child at a time.
- TO PREVENT A HAZARDOUS, UNSTABLE CONDITION, never place purses, shopping bags, parcels or accessory items on the handle. Never place anything on the canopy.
- NEVER PLACE child in the stroller with head toward footrest.
- NEVER ALLOW YOUR STROLLER to be used as a toy.
- DISCONTINUE USING YOUR STROLLER should it become damaged or broken.
- STROLLER TO BE USED only at walking speed product not intended for use while jogging, skating, etc.
- CAREGIVER MUST always help child get into and out of the stroller.
THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES. USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER.
- PUSH THE STROLLER HOLDING BOTH HANDS.
- THE STROLLER CAN BE STEERED IN THE DESIRED DIRECTION
- ALLOWING THE FRONT WHEELS TO SWIVEL WILL MAKE THIS EASIER.
- THE FRONT WHEELS MAY WOBBLE OR OSCILLATE WHEN WALKING FAST. LOCKING THE FRONT SWIVEL WHEELS WILL FIX THEM IN POSITION.
- THE STROLLER CAN BE TAKEN UP CURBS BY EITHER PUSHING DOWN ON THE HANDLE BAR, THEREBY RAISING THE FRONT WHEELS AND MOUNTING THEM ON THE CURB. OR, YOU CAN TURN THE STROLLER AROUND AND PULL THE STROLLER UP THE CURB.
- CAUTION IS REOUIRED WHEN PUSHING THE STROLLER ACROSS STEEP SLOPES OR UNEVEN SURFACES THIS MAY CAUSE STROLLER TO BECOME UNSTABLE AND FALL OVER. ALWAYS HOLD THE HANDLE BAR FIRMLY.
- WHENEVER YOU STOP, ALWAYS APPLY THE BRAKES BEFORE YOU LEAVE THE STROLLER.
- DO NOT HANG BAGS OR GOODS FROM THE HANDLE BAR, AS THIS COULD CAUSE THE STROLLER TO TIP OVER. USE THE STORAGE BASKET.
WARNING
- THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR A CHILD UNDER 6 MONTHS OLD.
- THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE BACKREST CAN BE ADJUSTED TO A MORE UPRIGHT POSITION AS THE CHILD GROWS OLDER AND IS ABLE TO SUPPORT ITS HEAD WITHOUT ASSISTANCE.
CARE AND MAINTENANCE
- To prolong the life of your stroller, keep it clean and do not leave it in the direct sunlight or in the car for extended periods of time.
- Removable fabric covers and trims may be cleaned using warm water with a household soap or mild detergent. Allow it to dry fully, preferably away from the direct sunlight.
- Non removable fabric covers and trims may be spot cleaned using a damp sponge with soap or a mild detergent. Allow it to dry completely before folding or storing it away.
- In some climates, the covers and trims may be affected by mold and mildew. To help prevent this occurring, do not fold or store the product if it is damp or wet.
- Always store the product in a well ventilated area.
- When using your stroller at the beach, completely clean your stroller afterwards to remove any sand and salt from the mechanisms and wheels. Sand and salt will cause premature wear and corrosion.
- If there are compression marks on the tires, use a domestic hair dryer to gently warm (DO NOT OVERHEAT) the tire and the compression marks should slowly disappear.
- Always check parts regularly for tightness of screws, nuts, and other fasteners. Tighten if required. To maintain the safety of your Infinity Stroller, seek prompt repairs for bent, torn, worn or broken parts by contacting Evolur.
Dream On Me Inc. 1532 S Washington Ave, Piscataway TWP, NJ 08854 Tel: 732-752-7220 Fax: 732-752-7221 MADE ZHONG SHAN, CHINA
CAUTION
This CAUTION Symbol is shown at certain steps in this Instruction Manual to
highlight the danger of being injured by moving parts.
Parts list
Please check to make sure that all of the following parts listed are included in the box when opened. If there are any missing parts, please contact Evolur before using the Infinity Stroller.
Assembly Procedure
To Open Stroller
-
Open storage latch, refer to Fig. A
-
Lift up the handle of stroller, refer to Fig. B & C
-
Hold the Gray Lock Pedal, then lift handle of stroller up until hear a “Click”, refer to Fig D. CHECK that the stroller is completely latched open every time you open the stroller and before continuing with the rest of the assembly steps.
Front Wheels
Slide each front wheel into the mounting post at the front of the stroller
until you hear a “click” (Fig. A). Pull each wheel to CHECK and ensure that
they are secure. For easy transport or storage, Push the wheel release tab on
the inside of the stroller frame and pull the wheel off of the stroller (Fig.
B).
Rear Wheels
Attach the rear wheels (L&R) to the stroller as in Fig. A. CHECK that wheel is securely attached by pulling on the wheel. For easy transportation and storage, remove the rear wheels by pushing the button shown in Fig. B
To Use Bumper Bar
Assembling and removing the Bumper Bar: Push the bumper in each slot to
install until it clicks into place, as shown in Fig A. Press the buttons on
the sides of the Bumper Bar together and pull it off to remove it, as shown in
Fig B WARNING: WHEN A CHILD IS IN THE STROLLER, KEEP THE BUMPER BAR ATTACHED
TO THE FRAME AT ALL TIMES. 5.
Using The Brakes
Parking and loosening the breaks: Push the breaks levers down to park, as
shown in Fig. A Push up the breaks to loosen the breaks, as shown in Fig. B
WARNING: ALWAYS APPLY THE BRAKES WHEN THE STROLLER IS STATIONARY.
Swivel Wheel
Push the swivel lock switch down to lock the front wheel in position. Push the
swivel lock switch up to allow the wheel to swivel.
Footrest Height Adjustment
Pick up the foot rest to higher position, as shown in Fig. A
Pull pieces on both sides of the footrest and lowering the footrest to the
lower position, as shown in Fig B.
WARNING: THE FOOTREST FEATURE IS PROVIDED FOR YOUR CHILDS COMFORT. THE FOOTREST IS NOT DESIGNED TO SUPPORT EXTRA WEIGHT. DO NOT ALLOW CHILDREN TO STAND OR SIT ON THE FOOTREST.
FOOT BARRIER
WARNING: For 0 – 6 MONTHS BABY, THE FOOT BARRIER HAVE TO BE USED.
The Foot Barrier is under the Footrest, take it out as shown in Fig. A. Put the bumper bar go through the Foot Barrier, then attach the bumper bar to stroller frame, as shown in Fig B. Attached the Foot barrier to the side of the seat with the two Snaps at each side, as shown in Fig. C
WARNING: Child may slip into leg openings and strangle. Never use in reclined position unless the foot barrier is set up in position
Adjusting The Backrest
Adjustment of the reclined and upright position: Pull the 2 straps as shown in
Fig. A to make the backrest move to the upright position. Pull down the buckle
as shown in Fig. B to recline the backrest.
WARNINGS:
- THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WITH CHILDREN LESS THAN 6 MONTHS OLD.
- THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE BACKREST CAN BE ADJUSTED TO MORE UPRIGHT POSITION AS THE CHILD GROWS OLDER AND IS ABLE TO SUPPORT ITS HEAD WITHOUT ASSISTANCE.
NOTE: IF THE CHILD IS SITTING IN THE SEAT, SUPPORT THE BACKREST AS IT RECLINES. IF YOU HAVE DIFFICULTY ADJUSTING THE BACKREST YOU MAY NEED TO REMOVE THE CHILD FROM THE SEAT TO ALLOW YOU TO RAISE OR LOWER THE BACKREST WITH EASE.
Securing Your Child To The Harness
WARNING: USE THE HARNESS AT ALL TIMES. When not in use, disconnect
shoulder straps from the waist strap and buckle to prevent strangulation. A
five point harness is provided to restrain your child. Buckle tongues separate
for added safety. To reconnect buckle tongues and to secure the child in the
harness, please follow the steps below carefully.
Position the shoulder strap tongue. 1 on the top of the waist buckle and 2 on the sides (Fig A).
Push both buckle tongues (1+2) into the buckle housing (3) until the buckle tongues lock into position (Fig B).
Securing Your Child To Harness
Tighten or loosen shoulder and crotch straps by sliding up Bar Slider an down the bar sliders (Fig C).
To tighten or loosen the waist straps, hold and lift the 4 bar sliders, then pull the harness strap to adjust to the desired fit. The waist strap needs to fit firmly around the child (Fig D).
To tighten or loosen the shoulder straps, slide the 3 bar sliders up or down to adjust to the desired fit. Always adjust the harness strap when changing the seating positions of the child (Fig E).
Securing Your Child To Harness
To release the buckle, squeeze the top button on the buckle housing with
enough pressure so that the buckle tongues can be released (Fig. F).
CAUTION: DO NOT SLIDE 3 BAR SLIDER OVER THE SEWN TAB ON SHOULDER HARNESS.
The stroller seat has 3 sets of harness slots at different heights to
accommodate the child. To change the shoulder harness height, push the
shoulder harness tongue out of the current harness slot and through fabric
slots. To reposition harness, pull the shoulder harness buckle tongue through
the desired slot (Fig G/H).
To Fold The Stroller
Note: before folding, make sure that the stroller is in the upright
position.
Squeeze the button 1 and then squeeze button 2. Then, fold the handle bar
downward (Fig A/B).
Pull the handle towards the back of the seat, and then forward into the seat as shown in Fig. C. Then, follow Fig. D and continue on the next page for the rest on the instructions.
Pull up on the handle and let the frame collapse. (Fig E).
Make sure the storage latch clicks into place. Stroller can stand up after fold (Fig F).
To Lift and Carry The Stroller
To lift or carry the stroller, ensure that the storage latch is engaged. Press
the spring hook to attach the shoulder strap on stroller at both sides and you
can carry the stroller on your shoulder conveniently.
1532, S. Washington Avenue Piscataway, NJ 08854
E-mail: info@evolurbaby.com
www.evolurbaby.com
Follow us on @EvolurBaby (o)
@evolurbaby to get your nursery featured on our social media.
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>