KROFT Leather Strap Shelf Instruction Manual

KROFT Leather Strap Shelf

Product Information

Product Name: Leather Strap Shelf Kroft

Number of Shelves: 3

• 23 Shelf
• 35 Shelf
• 47 Shelf

Included Hardware:

• Washer x 2
• Screw x 2
• Drywall Anchor x 2

Recommended Tools:

• Drill
• Level

Product Usage Instructions

1. 1. Using a level, measure and mark two points on the wall approximately 10″ above the desired height of the shelf.

2. We recommend the following spacing for each shelf:

  * 17″ apart for the 23 Shelf
  * 23″ apart for the 35 Shelf
  * 29″ apart for the 47 Shelf
3. TIP: When drilling the hole, be sure to keep the drill bit level. This will ensure the straps are mounted flush to the wall.
4. Insert drywall anchors into the drilled holes.

A hammer may be used to gently tap the anchor until it is flush with the wall, taking care not to drive the collar of the anchorbeneath the surface of the wall.

1. Fold the leather strap in half, aligning the two holes.
2. Using a screwdriver or drill, secure the strap to the wall by inserting the screw over the washer and then through the leather strap holes. Repeat with the second leather strap.
3. Insert the shelf between the leather straps and adjust it to be level.
4. You’re done! Your Leather Strap Shelf Kroft is now ready for use.

Dimension

23” SHELF

35” SHELF

47” SHELF

INCLUDED HARDWARE

RECOMMENDED TOOLS

HOLE DISTANCE RECOMMENDATIONS

Installation

1. Using a level, measure and mark two points on wall approximately 10” above desired height of shelf.
   We recommend the following spacing for each shelf:

   • 17 ” apart for 23” shelf
   • 23”apart for 35” shelf
   • 29” apart f o r 47” shelf

2. Using a ¼” drill bit , drill two holes through wall at marked points.
   TIP
   When drilling the hole, be sure to keep the drill bit level . This will ensure the straps are mounted flush to the wall.

3. Insert dry wall anchors into the drilled holes .
   A hammer may be used to gently tap the anchor until it is flush with the wall, taking care not to drive the collar of the anchor beneath the sur face of the wall

4. Fold leather strap in half aligning the two holes. Using a screwdriver or drill, secure to wall by inserting the screw over the washer then through the leather strap holes. Repeat with second leather strap.

5. Insert shelf between the leather straps and adjust to level.

6. Done!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>