Whitehall MFG WHLVD Ligature Resistant Linear Drain for Vinyl Floor Instruction Manual

Whitehall MFG WHLVD Ligature Resistant Linear Drain for Vinyl Floor

Product Information

The WHLVD Ligature Resistant Linear Drain is a product manufactured by Whitehall MFG. It is designed for use with vinyl flooring and provides a secure and efficient drainage system. The drain consists of a Clamping Collar, Drain Body Assembly, and Drain Grate.

Features

• Ligature resistant design
• Compatible with vinyl flooring
• Adjustable height legs for flexible installation
• 2 IPS drain outlet
• No-hub waste connection
• Durable construction

Specifications

• Maximum height: 4-7/8 inches
• Minimum height: 2-7/8 inches
• Maximum material thickness for vinyl flooring: 0.078 inches (2 mm)

Package Contents

• Clamping Collar
• Drain Body Assembly
• Drain Grate
• Fasteners

Product Usage Instructions

1. Remove the Drain Grate and Clamping Collar from the package and set them aside for later installation.
2. Prior to pouring the concrete floor slab or constructing an alternate flooring structure, position the Drain Body Assembly at the desired location on top of the sub-floor structure. Align it with the 2 IPS Drainpipe.
3. Adjust the height of the Drain Body using the Adjustable Height Legs. Position the unit so that the top of the Drain Body Flange will be level with the to-be-poured or other flooring structure. The Adjustable Height Legs can be flipped to allow for a maximum height of 4-7/8 inches or a minimum height of 2-7/8 inches.
4. Make up the 2 IPS No-Hub Waste Connection using an appropriate Band Coupling to ensure a leak-free connection.
5. Pour the concrete slab floor or complete the construction of the alternate flooring structure.
6. Prepare the unfinished floor as required to receive the vinyl flooring. Ensure an even surface with the proper slope towards the Drain, following industry standards of practice.
7. Lay the vinyl flooring in place. If desired, apply adhesive to a portion of the flooring on the sides of the Drain to help keep it in place. The maximum material thickness for the vinyl flooring should not exceed 0.078 inches (2 mm).
8. Rough-cut the vinyl flooring to help locate the interior of the drain cavity. Do not cut the flooring to fit; leave adequate flooring to hang over the drain cavity.
9. Complete the installation of the vinyl flooring by applying adhesive up to the outer edge of the Drain Body Flange.
10. Locate the rough cut opening and carefully cut the vinyl over the Linear Drain to align with the inside edge of the interior Drain Body cavity using a vinyl knife.
11. Install the Clamping Collar by positioning it over the DrainBody and vinyl flooring edge. Screw the Clamping Collar to the Drain Body using the provided Fasteners. Tighten the bolts from inside to out, alternating sides, and repeating the process until all bolts are tight. Do not over-tighten.
12. Install the Drain Grate by positioning it into or inside the Clamping Collar. Screw the Grate to the Clamping Collar using the provided Screws.
13. To prevent lifting of the vinyl, sandbag the Drain and vinyl.

Important
Details listed below for the installation of Vinyl Flooring are provided as a reference only. Installer shall follow Industry Standards of Practice which are best suited for the site conditions and materials being used.

1. Remove Drain Grate and Clamping Collar. Set aside for later installation.

2. Prior to pouring concrete floor slab or constructing alternate flooring structure: Position Drain Body Assembly at desired location atop the “sub-floor structure” and aligned with 2” IPS Drainpipe.

3. Adjust Drain Body height: Using Adjustable Height Legs, position the unit so that the Top of the Drain Body Flange will be level with the Concrete Slab Floor to be poured or other flooring structure.
   IMPORTANT: Adjustable Height Legs may be flipped to allow either a maximum height of 4-7/8” or a minimum height of 2-7/8”.

4. Makeup 2” IPS (2-3/8” OD) No-Hub Waste Connection: Use appropriate Band Coupling (Provided By Others) to ensure the connection does not leak.

5. Pour concrete slab floor or complete construction of alternate flooring structure.

6. Prep unfinished floor as required to receive vinyl flooring: Using industry standards of practice, ensure an even surface with proper slope to Drain.

7. Lay the vinyl flooring in place: *If desired to help keep the flooring in place, apply adhesive to a portion of the flooring on the sides of the Drain.![Whitehall MFG WHLVD Ligature Resistant Linear Drain for Vinyl Floor Instruction Manual Featured Image:

No file chosen

Update Post

Add MediaVisualText

Paragraph

P

Close dialog

Add media

Actions

Upload filesMedia Library

Filter mediaFilter by type

Uploaded to this post

Filter by date

All dates

Search

Media list

Showing 8 of 8 media items

UPLOADING

8 / 10 – Whitehall-MFG-WHLVD-Ligature-Resistant-Linear-Drain-for-Vinyl-Floor- fig- (6).PNG

ATTACHMENT DETAILS

Whitehall-MFG-WHLVD-Ligature-Resistant-Linear-Drain-for-Vinyl-Floor-fig-4.png

July 14, 2023

29 KB

704 by 519 pixels

Edit Image

Delete permanently

Alt Text

Learn how to describe the purpose of the image(opens in a new tab). Leave empty if the image is purely decorative.Title

Whitehall-MFG-WHLVD-Ligature-Resistant-Linear-Drain-for-Vinyl-Floor-fig- (4)

Caption

Description

File URL:

https://manuals.plus/wp-content/uploads/2023/07/Whitehall-MFG-WHLVD-Ligature- Resistant-Linear-Drain-for-Vinyl-Floor-fig-4.png

Copy URL to clipboard

ATTACHMENT DISPLAY SETTINGS

Alignment

Center

Link To

None

Size

Full Size – 704 × 519

Selected media actions

10 items selected

Edit SelectionClear Insert into post

No file chosen](https://manuals.plus/wp-content/uploads/2023/07/Whitehall-MFG- WHLVD-Ligature-Resistant-Linear-Drain-for-Vinyl-Floor-fig-4.png)
Maximum material thickness is 0.078” [2 mm].

8. Locate the Drain Body beneath the vinyl: “Rough cut” the vinyl flooring to help locate the interior of the drain cavity.
   IMPORTANT : Do not cut to fit; leave adequate flooring to hang over the drain cavity.

9. Complete installation of vinyl flooring: Apply adhesive up to the outer edge of the Drain Body Flange. Complete the Final Drain opening cutout: Locate the rough cut opening. Using a vinyl knife. Carefully cut the vinyl over the Linear Drain to align with the inside edge of the interior Drain Body cavity.

10. Install Clamping Collar: Position the Clamping Collar over Drain Body and vinyl flooring edge. Screw Clamping Collar to Drain Body using the Fasteners provided.*TIP: USING A SOCKET WRENCH, TIGHTEN BOLTS FROM INSIDE TO OUT, ALTERNATING SIDES AND REPEATING THE PROCESS UNTIL ALL BOLTS ARE TIGHT. DO NOT OVER TIGHTEN.
    Drain Body with Prepared Vinyl Flooring

11. Install Drain Grate: Position the Drain Grate into” or “inside”] the Clamping Collar and screw Grate to Clamping Collar using Screws provided.

12. Sandbag Drain and vinyl to prevent lifting of vinyl.

WHITEHALL MANUFACTURING P.O. BOX 3527 City of Industry, CA 91744-0527 U.S.A Phone 800-782-7706 626-968-6681 Fax 626-855-4862 Web: www.whitehallmfg.com

References

• Healthcare Products with Universal Design - Whitehall Mfg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>