GPO Retro SAX-8206-P Trimline Dual Line IP Tethered Cordless User Guide
- June 12, 2024
- GPO Retro
Table of Contents
GPO Retro SAX-8206-P Trimline Dual Line IP Tethered Cordless
Product Information
SIP Phone –
Product Name | SIP Phone |
---|---|
Model Numbers | SAX-8206-P / SAX-8106-P |
Quick Installation Guide Version | 1.01 |
Package Contents
When unpacking the phone, ensure all the following items are present and undamaged. If anything appears to be missing or broken, contact your dealer for a replacement.
- Handset Phone
- AC Adaptor (Optional)
- RJ-45 Cable
- Quick Installation Guide (This document)
Description
Front View
Name | Description |
---|---|
Ring Indicator | A red light indicator means that you have incoming calls. |
Dialing Pad | Press the buttons to dial a phone number or enter alphabetical |
characters.
LINE 1 / LINE 2| There are two LINEs at the bottom of this handset. Press to
finish the call.
End key| Press to put an active call on hold.
Function keys|
- HOLD: Press to put a call on hold.
- MUTE: Press to mute a call.
- VOLUME: Press to increase or decrease the volume of the ringer
tone.
Back View
Name | Description |
---|---|
LAN port | Connects to HUB, ADSL, or Switch (PSE). |
Installation
The following illustration shows how to install the phone on the wall.
Operation
Pairing with master unit
Please follow the steps below to pair the SAX phone set with the master unit:
- Enter 112811 on the master unit to standby.
- Press the star key to enter the SAX menu; close the item 2 to start the pairing.
- Press the line key to submit the pair.
Answering a Call
An incoming call is indicated by a ringing tone and a flashing indicator at the top of both handset and base units. You can answer the call by doing one of the following:
- Pick up the handset to answer the call.
Making a Call
Dialing with the Keypad:
- Enter the telephone number with the alphanumerical keypad.
- After entering the number you want to call, press the # key to force dialing or wait for 3 seconds before the number is dialed automatically.
Call Options
While a call is in progress, a number of additional options are available.
Putting a Call on Hold
You may want to put a call on hold temporarily while doing some work or attending to a second incoming or outgoing call. To put a call on hold, do one of the following:
- Press the HOLD key on the phone to put the call on hold.
- When you receive a second call, press the next available LINE key to attend to the new call, and the first call will be put on hold automatically.
Checking Voice Messages
If the message waiting indicator at the top of the handset or base unit lights up in red, it indicates that there are one or more new messages in voicemail box. Press the MESSAGE key on the phone to retrieve voice messages. (An external ITSP or PBX must support voice message feature. And you need to set a voice message codebefore using the voice mail feature.)
Support
For technological support, please email to support@aeicommunication.com.
Over view
This Phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to operate this product and take advantage of its features.
Package Contents
When unpacking the phone, ensure all the following items are present and
undamaged. If anything appears to be missing or broken, contact your dealer
for a replacement.
- Handset Phone
- AC Adaptor (Optional)
- RJ-45 Cable
- Quick Installation Guide(This document)
Product Description
The following contains important information to help you familiarize with the functions of the phone.
Front View
| Name| Description
---|---|---
1| Ring Indicator| A red light indicator means that you have incoming calls.
2| Dialing Pad| Press the buttons to dial a phone number or enter alphabetical
characters.
3| LINE 1 / LINE 2| There are two LINEs bottom in this handset.
4| End key| Press to finish the call
5| Function keys|
| HOLD| Press to put an active call on hold.
| MUTE| Press to mute a call.
| VOLUME| Press to increase or decrease the volume of the ringer tone.
Back View
NO. | Name | Description |
---|---|---|
1 | LAN port | Connects to HUB, ADSL, or Switch(PSE) |
Installation
The following illustration shows how to install the phone on the wall.
Operation
Pairing with master unit
- Please follow the step below to pair the SAX phone set with the master unit.
- Please enter “ 112 811” on master unit to standby.
- Press the star key to enter the SAX menu; close the item 2 to start the pairing.
- Press the line key to submit the pair.
Answering a Call
An incoming call is indicated by a ringing tone and a flashing indicator at
the top of both handset and base units. You can answer the call by doing one
ot the tollowings:
- lick up the handset to answer the call.
Making a Call
Dialing with the Keypad
- Enter the telephone number with the alphanumerical keypad.
- After entering the number you want to call, press the a key to force dialing or wait for is dialed automatically.
Call Options
While a call is in progress, a number of additional options are available
Putting a Call on Hold
You may want to put a call on hold temporarily while doing some work or
attending to a second incoming or outgoing call. To put a call on hold, do one
of the following:
- Press the HOLD key on the phone to put the call on hold.
- When you receive a second call, press the next available LINE key to attend to the new call, and the first call will be put on hold automatically
Checking Voice Messages
If the message waiting indicator at top of handset or base unit lights up in
red, it indicates that there are one or more new messages in voicemail box.
Press the MESSAGE key on the phone to retrieve voice messages.
(An external ITS or PBX must support voice message feature. And you need to
set a voice message code before using the voice mail feature.)
Support
For technological support, please email to supportiacicommunication.com.