IKEA VARMFRONT Portable Bank Instruction Manual

IKEA VARMFRONT Portable Bank

Product Information

• VARMFRONT

• Functions:

  1. POWER button
  2. LED indicators
  3. USB-C (charging and supply power)
  4. USB-A (only supply power)

• Power Bank Type: E2038

• Capacity: 10400mAh/37.44Wh

• Input:

  • 5.0Vdc, 3.0A/ 9.0Vdc, 2.0A/ 12.0Vdc, 1.5A (USB-C
    QC&PD)

• Output:

  • 5.0Vdc, 3.0A, 15.0W/ 9.0Vdc, 2.0A, 18.0W/ 12.0Vdc, 1.5A, 18.0W
    (USB-C QC&PD, USB-A QC)

• Manufacturer: IKEA of Sweden AB

Product Usage Instructions

1. To charge the power bank, connect the USB cable to the USB-C port of the power bank and then connect the other end of the cable to a USB charger or USB outlet that can provide sufficient power. The LED indicators will display the charging status.

2. When charging a device that requires a charging current of less than 100mA via the USB-A port, activate the small current supply mode by pressing the button for 3 seconds. To exit this mode, press the button again or it will automatically close after 2 hours.

3. The POWER button has multiple functions:

   • Single press: Shows the remaining charge and indicates that
     USB-A is ready to use.

   • Double press: Indicates that USB-A is ready to use.

   • Long press: Turns off the power bank after the restart.

4. For product servicing, do not attempt to repair the power bank yourself as it may expose you to dangerous voltage points or other risks.

5. To clean the unit, wipe it with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe it dry.

6. This power bank is for indoor use only.

7. The rechargeable Li-Ion battery cell is inside the power bank.

8. Dispose of the power bank separately from household waste. Hand it in for recycling in accordance with local environmental regulations for waste disposal.

Functions

1. POWER button
2. LED indicators
3. USB-C (charging and supply power)
4. USB-A (only supply power)

Charging power bank
Connect the USB-C cable to the USB-C port of the power bank first and then connect the USB cable to a USB charger or USB outlet that can provide sufficient power to charge the power bank. The LED indicators will display the charging status.

Supply power to devices

• Connect the USB cable to the USB-C or USB-A port of the power bank first and then connect the USB cable to the device that you want to charge.
• The power bank will detect a connected device and start charging automatically.
• The LED indicators will display the remaining charge in the power bank during discharging.

Check power status

• Click once on the POWER button and the LED indicators will light up and indicate the remaining power status.
• If the USB cable is not disconnected while the charging process finishes, push the POWER button first to restart the charging.

Small current supply mode

• Press the POWER button for 8 seconds when your device is being charged.
• The function is mainly used to charge certain wearable electronic devices. When charging a device that needs a charging current of less than 100mA via a USB-A port, this mode should be activated. You can press the button for 3 seconds to exit this mode, it also automatically closes after 2 hours.

Power button function (E2038)

Good to know

• You can charge up to 3 devices at the same time since the charger has 2 USB-A ports and 1 USB-C port. (Power Delivery and Quick Charge)
• The USB-C port is compatible with the Power Delivery (PD) 3.0 standard and Quick Charge (QC) 3.0 standard.
• The USB-A ports are compatible with the Quick Charge (QC) 3.0 standard.
• USB cable length and quality influence charging speed and performance.
• Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, the age of the battery, and the temperature in the surrounding area.
• Storage temperature: -10°C to 25°C (14 °F to 77 °F ).
• Power bank operating temperature: 0°C to 40°C (32 °F to 104 °F ).
• Unplug the power bank from the power source before cleaning and when it is not in use.
• The power bank should not be left discharged for a longer period.
• Power banks should not be charged while in contact with flammable materials like textiles.

WARNING

• Do not modify, disassemble, open, drop, crush, puncture or shred the product.
• Only use in dry locations.
• Risk of fires and burns. Do not open, crush, heat above 60°C (140°F) or incinerate.
• Do not subject the product to wet, moist or excessively dusty environments since this can cause damage to the unit.
• Keep the product away from open flames or sunlight to prevent heat buildup.
• Keep the product away from high-voltage devices.
• Children should be supervised to ensure they do not play with the product.
• Do not short-circuit the product or its cells.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.

Product Servicing
Do not attempt to repair this product yourself. If you open or remove parts, you may expose yourself to dangerous voltage points or other risks.

Care instruction
To clean the unit, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe dry.

Technical data

• Type: E2038
• Capacity: 10400mAh/37.44Wh
• Input: 5.0Vdc, 3.0A/ 9.0Vdc, 2.0A/ 12.0Vdc, 1.5A (USB-C QC&PD)
• Output: 5.0Vdc, 3.0A, 15.0W/ 9.0Vdc, 2.0A, 18.0W/ 12.0Vdc, 1.5A, 18.0W (USB-C QC&PD, USB-A QC)

When two or three ports output at the same time, they share 5.0V/3.0A. For indoor use, only Rechargeable Li-Ion battery cells are inside. Manufacturer: IKEA of Sweden AB Address: Box 702 SE-343 81 Älmhult SWEDEN

FCC STATEMENT

This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions:

1.  this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>