Carl s PALCE EYE XO Overhead Launch Monitor Instructions
- June 12, 2024
- Carl s PALCE
Table of Contents
Carl s PALCE EYE XO Overhead Launch Monitor
Product Information
The Uneekor Frame Mount is an accessory for the Pro Golf Enclosure. It allows you to securely mount a launch monitor to the enclosure, providing a stable and convenient setup for your golf simulation experience.
Product Usage Instructions
-
Step 1: Assembly
After completing the assembly of your Pro Golf Enclosure, remove the fabric flap covering the front or crossbar ceiling pipe. Install the U-Bolt, U-Bolt Clamp, and Coupling Nut over the pipe. -
Step 2: Cutting Slit
Using sharp scissors or a utility knife, cut a slit in the fabric of the flap that aligns with the mount hardware. Be careful not to cross into the finished edge of the flap material. Close the flap around the pipe. -
Step 3: Base Plate Attachment
Secure the base plate to the clamp using the provided screws. -
Step 4: Mount Attachment
Secure the launch monitor mount to the base plate. -
Step 5: Hang and Adjust
Hang the launch monitor from the mount as described in the instructions. Make final adjustments as necessary to ensure proper positioning.
Mount Instructions
-
Step 1
Afer completing the assembly of your Pro Golf Enclosure, uninstall the fabric flap covering the front or crossbar ceiling pipe and install the U-Bolt, U-Bolt Clamp, and Coupling Nut over the pipe.
Step 2
Using sharp scissors or a uyility knife, cut a slit in the fabric of the flap that aligns with the mount hardware. Be sure your cut does not cross into the finished edge fo the flap material. Close the flap around the pipe. -
Step 3
Secure the base plate to the clamps with the provided screws. -
Step 4
Secure the launch monitor mount to the base plate. -
Step 5
Hang the launch monitor from the mount as described in the instruc?ons and make final adjustments as necessary