Yanhua ACDP Automatic Authorization App Instructions
- June 12, 2024
- Yanhua
Table of Contents
Nanning Yanhua Electronics Co.,Ltd
Instruction of Yanhua ACDP Automatic Authorization
ACDP Automatic Authorization App
-
Install or update your ACDP APP version.
Please make sure the IOS APP version is 1.8.4 or above and Android APP version is 3.0.92 . -
Turn on the WIFI and Bluetooth on your cell-phone. Go to Me – System settings – Initial use settings to bound the ACDP with cell-phone.
-
Bound the ACDP to the cell-phone successfully. Find the paster with authorization code on the module box，Peel off the green protective film. Use an eraser (avoid hard object) to clean the residuals to reveal a clear QR code.
-
Make sure the ACDP was bounded successfully，and click “Me”：
-
Click “module list”：
-
Click “ADD”
-
Click “Scan QR Code” to scan the QR code on the paster or type
-
Check the authorization card number and click “Submit” after confirmed.
-
When the prompt comes with Authorization Success，click “OK”
-
When the prompt comes with Refreshing authorization info success，click “OK”.
-
If you want to add more module authorization info，please click “ADD”to start adding another module authorization.
-
If you change another phone or PC to run this ACDP，after bounded this ACDP to another phone ， please click “Refresh”to download your authorization info.
NOTE: When you run the ACDP and try to run a module function, If it shows the device does not obtain the authorization of this function, as shown:
Please make sure you bought this module authorization and add it to your ACDP according to the above step.