SABER ATD-80211 1-000 Lumen Rechargeable Clamp Light With Speaker Owner’s Manual

SABER ATD-80211 1-000 Lumen Rechargeable Clamp Light With Speaker

Product Information

Product Usage Instructions

1. Ensure the product is fully charged before first use.
2. To turn on the clamp light, press the power button located on the device.
3. To adjust the brightness level, use the provided controls.
4. To activate the speaker, connect your device via Bluetooth or auxiliary input.
5. Use the speaker controls to adjust the volume and playback settings.
6. When not in use, turn off the clamp light to conserve battery power.
7. To recharge the battery, connect the provided charging cable to the device and a power source.
8. Refer to the user manual for more detailed instructions and safety precautions.

FEATURES

• High-quality sound from built-in 5W wireless speaker
• Heavy-duty clamp features (2) strong magnets in base
• Digital battery and lumen setting indicator screen
• Memory function records brightness settings after 5 seconds, and that setting is recalled the next time device is activated
• Super-bright COB LED bulb delivers variable brightness of 100 to 1000 lumens
• Lithium-ion rechargeable battery for longer life and consistent power
• IP65 rated for dust and water resistance – IK07 rated for mechanical impact protection
• Includes USB-C charging cord and 5V, 3.5A AC charger

SPECIFICATIONS:

• Variable Brightness Floodlight: 100-1000 lumens
• Runtimes: up to 15 hours
• Battery: 3.7V, 4400mAh lithium-ion battery

Operating Instructions

• See figure 1 below and familiarize yourself with the controls and components of your clamp light.
• Charge your clamp light with the cable: Plug the USB Type-C cable into any 5V DC power source and let the unit fully charge until the digital display reads 100%.
• To use your clamp light, press the power button to the right of the digital display on the back to turn the clamp light on. The digital display will show the battery power percentage. See figure 2.
• To change the brightness of the LED, hold the power button down for 3 seconds, and the LED will slowly dim (if it was initially at 100%) or brighten (if it was initially at 10%). NOTE: Your clamp light will return to the same state of brightness that you left it when you powered it off last.
• To use the BT speaker, press the BT button once until you hear an ascending tone and a musical note symbol (J) appears in the digital display as shown in figure 4. After a few seconds or so, you will hear a dual beep tone, indicating that the unit is ready to be paired. Go to your devices BT settings and scan for available devices. Your clamp light will show up as “BT Speaker” (you can rename it in your device settings later if you wish) Pair your device to “BT Speaker”. Once you have successfully connected, you will hear another ascending tone to let you know you are connected.
• The volume of your media is controlled by your device.
• When you disconnect from your BT speaker, you will hear a descending dual beep to let you know that you have successfully disconnected.
• Charge the light after each use if it is used often, to ensure longevity. Charge light every month if it is not in constant use.

Cautions

• DO NOT use in or around tubs, showers, sinks, pools, hot tubs or in any wet environment
• Use only the recommended voltage and frequency requirements
• Keep out of reach of children
• DO NOT operate light with wet hands
• Keep light away from hot objects
• DO NOT leave light in direct sunlight for prolonged lengths of time

REPLACEMENT PARTS

Not all components of this product are replacement items but are illustrated as a convenient reference for a position in the assembly sequence. When ordering parts, give the model number, part number and description. Call your distributor for current pricing:

WARRANTY

1-YEAR LIMITED WARRANTY

• PURCHASED FROM: _____
• DATE PURCHASED: _____
• INVOICE/RECEIPT NUMBER: _____

Your ATD-80211 is warranted for a period of 12 months from the original purchase date. For a period of one (1) year from your purchase date, ATD Tools, Inc. will repair or replace (at its option) without charge, your ATD product if it was purchased new and the product has failed due to a defect in material or workmanship which you experienced during normal use of the product. This limited warranty is your exclusive remedy. To access the benefits of this warranty, contact your supplier, or point of sale directly. You may be advised to return the product under warranty, freight prepaid, to your supplier for warranty determination. If this ATD product is altered, abused, misused, modified, or undergoes service by an unauthorized technician, your warranty will be void. We are not responsible for damage to ornamental designs you place on this ATD product and such ornamentation should not cover any warnings or instructions or they may void the warranty. This warranty does not cover scratches, superficial dents, and other abrasions to the paint finish that occur under normal use. It also does not cover normal wear items such as but not limited to brushes, batteries, drill bits, drill chucks, pads or blades.

Subject to the law in your state:

1. Your sole and exclusive remedy is the repair or replacement of the defective product as described above.
2. ATD is not liable for any incidental damages, including but not limited to, lost profits and unforeseeable consequences.
3. The repair and replacement of this product under the express limited warranty described above is your exclusive remedy and is provided in lieu of all other warranties, express or implied. All other warranties, including implied warranties and warranties of merchantability or fitness for a particular purpose, are disclaimed and, if a disclaimer is prohibited, these warranties are limited to one year from your date of purchase of this product.
   Some states’ laws do not allow limited durations on certain implied warranties and some states’ laws do not allow limitations on incidental or consequential damages. You should consult the law in your state to determine how your rights may vary.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Made in China to ATD Tools, Inc. Specifications
Visit us at www.atdtools.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>