Electrolux LNG7TE18S 700 Built-in Fridge Installation Guide
- June 12, 2024
- Electrolux
Table of Contents
Electrolux LNG7TE18S 700 Built-in Fridge
Product Information
This user manual provides installation instructions for Electrolux and AEG fridge/freezer top control sliding doors. The manual contains a diagram with labeled parts and hardware required for installation. The manual also includes safety information and warnings.
Manufacturer Website: www.electrolux.com or www.aeg.com
Product Usage Instructions
- Before proceeding with installation, read the safety information in the User Manual.
- Ensure you have all the necessary hardware and tools required for installation.
- Follow the labeled diagram to identify parts and hardware.
- Attach part A to the top of the unit using four screws (part G).
- Attach part B to part A using two screws (part G).
- Attach part C to parts A and B using two screws (part G).
- Attach part D to part A using one screw (part G).
- Attach part E to parts C and D using two screws (part G).
- Attach part F1 to part E using one screw (part G).
- Attach part F2 to part E using one screw (part G).
- Attach part H to parts A and B using four screws (part G).
- Attach part I to parts A and B using one screw (part G).
- Attach part L to parts C and D using two screws (part G).
- Attach the sliding door to the top unit using four screws (part G).
- Attach part PS to parts C and D using one screw (part G).
- Attach part 1 to the sliding door using two screws (part G).
- Insert parts 2 and 3 into part 1.
- Insert part 4 into part 2.
- Insert part 5 into part 3.
- Attach parts F1 and F2 to the sliding door using two screws (part G).
- Attach part PS to the sliding door using one screw (part G).
- Attach part E to part I using two screws (part G).
- Attach parts 1C and 2C to the sliding door using four screws (part G).
- Attach parts B and B1 to the sliding door using two screws (part G).
- Attach part PS to the sliding door using one screw (part G).
- Attach part E to parts B and B1 using four screws (part G).
- Attach part I to the sliding door using two screws (part G).
- Attach part H to the sliding door using two screws (part G).
Note : All measurements and hardware requirements are outlined in the labeled diagram.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>