SKEYEWATCH SK-CA38-2MR2 License Plate Camera AHD User Guide
- October 30, 2023
- SKEYEWATCH
Table of Contents
SKEYEWATCH SK-CA38-2MR2 License Plate Camera AHD
Product Information: SK-CA38-2MR2 License Plate Camera AHD
The SK-CA38-2MR2 License Plate Camera AHD is a surveillance camera that is installed on the rear license plate to monitor the area behind the vehicle. It features a 1/2.9 progressive scan CMOS imaging target surface with a resolution of 1920H*1080V. The camera has a minimum illumination of 0.05Lux (color), 0Lux (IR on) and electronic shutter (auto), day to night, auto white balance. It has a wide-angle lens adopted for large monitoring areas and an IR fill light range of 3-5m. The camera is IP69K rated to ensure good vehicle damping performance.
Features
- 1/2.9 progressive scan CMOS imaging target surface
- Resolution: 1920H*1080V
- Minimum illumination:0.05Lux (color),0Lux (IR on)
- Electronic shutter (auto), day to night, auto white balance
- Wide-angle lens adopted for large monitoring areas
- IR fill light range: 3-5m
- Installed on the rear license plate to monitor the area behind the vehicle
- IP69K to ensure good vehicle damping performance
Specifications
- Model: SK-CA38-2MR2
- Image sensor: 1/2.92.0Mp progressive scan CMOS
- Effective pixels: 1920(H)x1080(V)
- Video signal standards: NTSC/PAL
- Minimum illumination: 0.05Lux (color),0Lux (IR on)
- Shutter speed: 1/25s-1/25,000s (auto)
- Day-to-night mode: ICR
- Adjustment angle: Up (horizontally): 30°; down (horizontally): 45°
- Backlight compensation: supported
- S/N: 48db
- DWDR: Supported
- White balance: Auto tracking of white balance
- Auto gain: Supported
- 3D noise reduction: Supported
- IR range: 3-5m
- Lens: 2.2mm M12 lens (DFOV:178°; HFOV: 142°; VFOV: 80°)
- Video output 1.0Vp-p composite video output, 75Ω, 4Pin aviation cable
- power supply:DC12V± 10%
- Operating temperature: -40-70
- Operating humidity: 0% – 95%
- IP rating: IP69K
- Installation mode: Supported to be installed on the rear license plate
- Dimensions: 196.7mm29.5mm30mm (LWH)
- Net weight: About 200g
- Video output cable interface
Product Usage Instructions
The SK-CA38-2MR2 License Plate Camera AHD is designed to be installed on the rear license plate of a vehicle to monitor the area behind the vehicle. To use the camera, follow the steps below:
- Mount the camera onto the rear license plate of the vehicle.
- Connect the video output cable interface to a compatible display device.
- Connect the video output power supply to a power source.
- The camera will automatically adjust the electronic shutter, day to night mode, and white balance according to the lighting conditions.
- Use the wide-angle lens to monitor large areas.
- The camera has an IR fill light range of 3-5m for use in low-light conditions.
Ensure that the camera is installed securely and that all connections are properly made before use.
Dimensions
Video output cable interface
@ skEYEwatch 2023. All Rights Reserved
www.skeyewatch.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>