CyclingDeal CD-95 Upright Bike Stand Instruction Manual
- October 30, 2023
- CyclingDeal
Table of Contents
CyclingDeal CD-95 Upright Bike Stand
The CyclingDeal Bike Storage Rack is a patented product with the USA PAT. 17/190,392. It is a versatile storage rack that can be used horizontally or vertically to store your bike. The product comes with a transparency barcode on the packaging that can be scanned using the Amazon App or Transparency App to verify the authenticity and view the usage guidelines video.
Product Usage Instructions
- Download the Amazon App or Transparency App.
- Scan the transparency barcode on the product’s packaging using the app.
- Verify authenticity and view the usage guidelines video.
- Assemble the storage rack by following the instructions provided in the video.
- Adjust the hook (H) and roller (I) until the front wheel is in an upright position for the best result.
- Ensure all rollers (I, J) sit tightly against the rear wheel.
- For the best result, the hook-on-wheel position needs to be slightly lower than the hub.
Assembly Instructions
The product comes with the following components:
- 2 vertical posts with base plates (A, B)
- 1 horizontal bar (C)
- 1 hook (H)
- 2 rollers (I, J)
- 2 plastic spacers (K)
- 4 screws (D)
- 4 bolts (E)
- 4 washers (F)
- 4 nuts (G)
Follow the below instructions to assemble the storage rack:
- Attach the base plates (A, B) to the vertical posts using the screws (D).
- Attach the horizontal bar (C) to the vertical posts using bolts (E), washers (F), and nuts (G).
- Attach the hook (H) to the horizontal bar using bolts (E), washers (F), and nuts (G).
- Attach the rollers (I, J) to the horizontal bar using the plastic spacers (K), bolts (E), washers (F), and nuts (G).
Note: Scan the QR code provided in the packaging to watch the assembling instruction video.
Product Video
Refer to the product video for more information on how to assemble and use the CyclingDeal Bike Storage Rack.
Transparency
This Product Is Amazon Transparency Enabled.
- Download the Amazon App or Transparency App;
- Scan the transparency barcode on the product’s packaging;
- Verify authenticity and view the usage guidelines video.
PARTS
ASSEMBLING INSTRUCTIONS
IMPORTANT
For the best result, adjust the hook (H) and the roller (I) until the front
wheel is in an upright position.
For the best result, the hook-on-wheel position needs to be slightly lower than the hub.
INSTRUCTIONS
WARNING: Check the bike stability after initial set up! Keep out of reach of children!
- Firstly adjust roller position to fit different wheel size.
- Compatible tire size: 24 inch to 29 inch,
- Max tire width: 2.4 inch
- Push the bike in, and set the roller against the wheel. Tighten two bolts which is on the roller.
- Adjust the hook height to fit different frame-size bikes.
- Easy push in for horizontal storage.
- For vertical storage, may not be compatible with the bikes with mudguard or rear racks.
WARRANTY & CONTACT
-
Contact USA:
warranty@cyclingdealusa.com. -
AUSTRALIA:
warranty@cyclingdeal.com.au.