realme RMP2105/LTE Pad Mini Tablet User Manual

: June 4, 2024
: realme

Table of Contents

Greetings from realme Pad mini
Warning
Standard accessories
Specification
Statement
Security information
Battery precautions in use
Other matters of attention
Waste Electrical and Electronic Equipment (WEEE)
EU Declaration of Conformity (DoC)
CE certification information (SAR)
FCC Regulations
Regulatory
- Service Terms
- Warranty Instructions and Conditions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

realme RMP2105/LTE Pad Mini Tablet

Greetings from realme Pad mini

This manual will show you how to use the pad and its important functions. You may also visit raalme official weblliteto get more information about the pad.

realme RMP2105/LTE Pad Mini Tablet Overview

❶ Volume button
❷ Power button
❸ Speaker
❹ USB-C connector
❺ Microphone
❻ Rear camera
❼ Headset connector
❽ SIM card tray
❾ Front camera
❿ Touch screen

Warning

Do not place the tablet or battery near or inside heating equipment, cooking equipment, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion.
The original charger, data cable and battery shall be used. Unapproved charger, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
When charging, please place the device in environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5℃~35℃.
This device only supports standard Nano SIM card(4FF), using non-standard SIM card may cause damage to your phone.
The battery can not be removed from the device, if you need to replace, please contact realme Authorized Service Center.

Standard accessories

You are provided with the following standard accessories:

Pad x 1
Charger x 1
Data Cable x 1
User Manual x 1
SIM Pin x 1

Specification

Product	RMP2105
Main screen parameter	22.09cm (8.7″)
Dimension	211.8 x 124.5 x 7.6 mm
Battery	6260mAh/24.22Wh(Min)

6400mAh/24.76Wh(Typ)
Camera| Rear : 8Megapixels
Front : SMegapixels
Operating temperature| 0°( 35°(
SAR Values| FCC SAR| X.XXW /KG (Body)
Radio Waves Specifications

This user manual provides the product safety information.
Before using the tablet, please read the Safety Guide carefully.

Statement

The User Manual contains information regarding safety, operation and customer service. Before using the realme Tablet, please read all the instructions and the security information below, and keep it for backup. More detailed instructions are kept in this product as an electronic file.
Please read the built-in instructions on the realme Tablet. For the latest information, please visit https://www.realme.com.

Security information

This tablet is suitable for working in an environment of 0°C to 35°C.
Temperature for storage should be between -20°C and 45°C.
Excessively high or low temperatures can affect the use of tablet and even damage the tablet and battery. When using this tablet, please avoid places near telephone, television, radio, and office automation machines. Please charge this tablet in an environment between 5°C and 35°C, so as not to reduce battery performance and standby time. If the tablet has a flash charging function, it may not be able to enter the flash charging mode when the temperature is below 15°C or over 35°C.

The operating system of this product supports official system updates. If the user rooted the ROM system of any third party or modified the system file by cracking, it may lead to security risks of the system. realme will not provide any support nor take any responsibility for the final use in these cases.

Battery precautions in use

Please do not weld battery terminals. Otherwise, it may cause battery leakage, overheat, explosion and fire.
Please do not press or pierce the battery with hard objects (for example needle or other sharp objects), to avoid damage, battery leak, overheating or fire.
Battery liquid may be harmful if contacted with skin or clothes, your skin might be hurt. Please immediately wash it with water, or go to hospital at once to seek medical help if necessary.
If there are any abnormalities like high temperature, discoloration, distortion, bulging, leakage, etc. during operation, charging or preservation, please cease to use the device.
Do not expose the battery liquid to eyes. It might cause potential blindness. When happens, wash your eyes immediately or go to the hospital if serious.
Do not disassemble or modify the battery, as it may cause battery leakage, overheating, explosion or fire.
Do not place or use the battery near fire, heater or other high temperature places. Otherwise, it may cause battery leakage, overheatexplosion or fire.
If there is battery leakage or strange smell, please immediately move it from open flame in order to avoid fire or explosion.
Please keep the battery away from moist or wet areas from moisture.
Otherwise, it may cause battery overheat, fuming and corrosion.
Do not place the battery directly in sunlight, or other high temperature areas. Otherwise, battery leakage and overheating may make battery performance descend and service life affected. Keep the battery in a well-ventilated area.
Do not use the battery or connect it with a high-voltage power supply, otherwise it may cause a short circuit or burst.
The battery can be charged and discharged hundreds of times at least, but it will eventually wear out.
Do not dispose the battery as household waste. Dispose the battery according to local regulations.
Caution: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the user manual.

Warning: Please do not charge the battery over 12 hours.

Other matters of attention

Adapter shall be installed near the equipment and shall be easily accessible.
If any part of the product is cracked or damaged, discontinue use immediately and contact the realme Service Center.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Waste Electrical and Electronic Equipment (WEEE)

This symbol means that according to local laws and regulations your product and/ or its battery shall be disposed of separately from household waste. When this product reaches its end of life, user has the choice to give his product to a competent recycling organization. Proper recycling of your product will protect human health and the environment.

realme will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products.
realme will comply with all the applicable laws related to WEEE management.

EU Declaration of Conformity (DoC)

Hereby, Realme Chongqing Mobile Telecommunications Corp., Ltd. declares that this wireless device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.realme.com/global/support/eu-declaration.

CE certification information (SAR)

This device was tested for typical body-worn operations with the back of the tablet kept 0.5cm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 0.5cm separation distance between the user’s body and the back of the tablet. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.

| If you are using pacemaker, hearing aid, cochlear implant or other device, please use the tablet according to the doctor’s advice.
---|---

Notice:
Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. The operation frequency in 5150-5350MHz of Wi-Fi SG are restricted to indoor usage only.

__	__	AT	BE	BG	CH	CY
DK	EE	EL	ES	Fl	FR	HR
HU	IE	IS	IT	LI	LT	LU
LV	MT	NL	NO	PL	PT	RO
SE	SI	SK	TR	UK(NI)

Please check Radio Waves Specifications in the user manual to see whether this product supports Wi-Fi SG or not.

FCC Regulations

This tablet complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving a1ntenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Note:

Caution: Changes or modififications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Information (SAR)

This tablet is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States.
During SAR testing, this device was set to transmit at its highest certifified power level in all tested frequency bands, and placed in positions that simulate RF exposure in near the body with the separation of O mm. Although the SAR is determined at the highest certifified power level, the actual SAR level of the device while operating can be wellbelow the maximum value. This is because the Tablet is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specifific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W /kg.
This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specifified in IEEE1528

The FCC has granted an Equipment Authorization for this tablet with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this tablet is on fifile with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMPXXXX For this device, the highest reported SAR value for usage near the body is XXX W/kg.
While there may be dierences between the SAR levels of various tablets and at various positions, they all meet the government requirements.
SAR compliance for body-worn operation is based on a separation distance of XX mm between the unit and the human body. Carry this device at least XX mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of XX mm between this device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certifified, and use such body-worn accessory should be avoided.

Regulatory

Steps to search E-label : Go to Settings -About tablet – Regulatory.

Service Terms

Thank you for using realme tablet. We will provide our product with comprehensive warranty services in accordance with applicable national laws and regulations. In case of any conflict between thefollowing policies and the National Policies, or Commissions, the national policies shall prevail.

Within 12 months from the purchasing date, in the event that performance failure occurs from normal use, consumer can claim for maintenance. The accessories such as charger, data cable have a 6-month warranty. The battery (including internalbattery) has a 12-month warranty.
Please ask the dealer to issue an invoice and keep it in a safe to avail warranty services.
Valid purchase invoice: the invoice shall indicate the serial number of the tablet, factory serial number (batch number) of the accessories (battery and charger), product model, sales date, Seller’s seal, amount and so on.
A valid invoice are essential for protecting your warranty rights. (Valid invoice: the information filled in shall be complete, true and correct without alteration). If you lose the valid invoice and are unable to provide us with a photocopy of them, we will provide your tablet with a 12-month warranty.
Our warranty does not cover the other accessories for the product (for instance: the user manual, warranty card, etc).

| Note: The above warranty is only valid for the products sold in this country. realme have the right of final review and interpretation for the warranty policy.
---|---

Warranty Instructions and Conditions

Your warranty {please refer to the Warranty Information Card) is only valid under normal use of your device. All man-made damages and any of the following conditions are out of free warranty, but a repair can be still implemented at your own cost:
A. The warranty period has expired;
B. Damage caused by human factors, including damages caused by usage under improper operating environment and the failure to the user manual;
C. The customer disassembles, repairs or modifies the device without the Company’s authorization or has it repaired at a repair shop that is not included in the Company’s approved repair network;
D. Damage caused by a force majeure (such as floods, fires, earthquakes and lightning);
E. The user is unable to provide valid proof of purchase or the product model and barcode do not match or are altered.
F. Natural wear and tear of the product (such as casing, keypad, display screen, antenna and other accessories).
G. Faults, damages or defects not caused by the company;
H. Barcode and warranty labels are damaged and unrecognizable.
Others
A. External damages(including wear, tear, and scratches) are not entitled to the warranty service;
B. Faults caused by the Internet and wireless information service providers (operators) are not covered by the warranty;
C. Our warranty does not cover services verbally promised by the dealer which violate principles set forth on the warranty card. For products that meet the replacement requirements, you can visit to our nearest Authorized Service Centre for replacement. Upon replacement, if the device is faulty, we can replace it with a device of the same specification and model; if any accessory is faulty, the faulty accessory will be replaced. Both replacements are free of charge.
If any of our products is required to be fixed, you may take it to any realme Authorized Service Center.
If the product requires repair since water enters the device or it is seriously damaged by human factors, the customer needs to sign the repair job sheet form with the realme Authorized Service Centre firstly;
All components, parts and accessories replaced during the warranty period shall become the property of the Company.

Considerations for Sending the Device for Repair and Collecting It

When completing the realme tablet Repair Form, the customer must fill in valid information in clear handwriting as required (name, address, phone number and fault symptoms);
Before sending your device for repair, please back up all information and data you have saved on the tablet (such as phone numbers, text messages and pictures) before you delete them to prevent loss or damage during the testing and inspection process. In any circumstances, realme Authorized Service Centre and its staff will not be responsible or obligated to back up or recover your information and data, or accept responsibility for any consequence arising from the loss, damage or leakage of your information and data. Please ensure the legality of the information and data you have saved. To respect your privacy, we will not transmit, backup or examine your information and data(unless they are necessary for us to provide you with services), and we reserve the right to refuse to provide services for illegal content;
The Customer shall collect the tablet by presenting the realme tablet Repair Form. In case the Customer loses the Customer Copy, the Customer shall go through the loss reporting procedures with his/ her personal ID or valid proof of identity before collecting the tablet.