ConnectedChef Kitchen Tablet and Food Preparation Station User Guide

ConnectedChef Kitchen Tablet and Food Preparation Station

Product Information

This device complies with part 15 of the FCC Rules, which meansthat it has been tested and certified to meet specific standards for radio frequency interference. The device is designed to operate within certain parameters to ensure that it does not cause harmful interference to other devices.

FCC Warning

Operation of this device is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Troubleshooting Tips

If you experience interference or undesired operation, try the following troubleshooting tips:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Product Usage Instructions

When using this device, ensure that it is placed in an area where it will not interfere with other electronic devices. If you experience interference or undesired operation, refer to the troubleshooting tips provided in the user manual.
It is important to note that any changes or modifications to the device not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Therefore, do not attempt to modify or alter the device in any way.
Follow the manufacturer’s instructions for setting up and using the device. If you have any questions or concerns about the device, refer to the user manual or contact the manufacturer for assistance.

BUTTONS ARE LOCATED ON THE DISPLAY ENO OF THE CONNECTED CHEF™ KITCHEN TABLET

Get Started

Connect the USB-C charging cable to charge the battery

Press the power button to start the Kitchen Tablet

Start-up approx. 30 seconds

• SLEEP MOOE Tap the pawer button ance ta enter sleep mode and tap again to wake.
• POWER OFF & RESTART Press and hald the pawer buttan. Options ta Pawer Off ar Restart will appear on the screen.

Follow setup screens

Android Help visit https://support.google.com/android
Google and Android are trademarks of Google llC

Get Connected

• Access to unlimited free content online with millions of creaking and find related websites and videos as well as tutorials and cooking classes, all in one place.
• Download your favorite cooking and find apps ta start and save your favorite recipes. Connected Chef™ becomes your digital recipe bookshelf and much mare.

ROTATIONAL DISPLAY

Because every kitchen is different, the Connected Chef™ Kitchen Tablet display can be oriented whichever way suits you.

ENABLE SCREEN ROTATION

To turn rotation on or off, swipe down from the top of the Kitchen Tablet display and tap Auto-rotate
if Auto-rotate button is not displayed, press

ROTATE THE KITCHEN TABLET

Lift the Kichen Tablet and rotate it so the display is oriented the way you want, then tilt the kitchen tablet forward. The display will rotate

Please note : Some opps may not allow screen rotation

CLEANING

HOW TO CLEAN THE KITCHEN TABLET DISPLAY

HOW TO CLEAN THE BAMBOO CUTTING BOARD

Remave the Bamboo Cutting Baard frame the Kitchen Tablet base and hand wash

IN THE BOX

CONNECTED-CHEF.COM
Connected Chef”” is a trademark of Capstone industries Inc

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Specific Absorption Rate (SAR) information:

This Kitchen Tablet + Food Prep Station meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Kitchen Tablet + Food Prep Station (FCC ID: 2BAQRCAP-1815) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for close to the user’s body is 0.112W/kg. The device was tested for typical operation near the body while maintaining a distance of 0mm from the back of the phone. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

SCAN ME

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>