Hynall FSK 915MHz RF Wireless Microwave Motion Sensor Switch Instructions
- October 30, 2023
- Hynall
Table of Contents
Hynall FSK 915MHz RF Wireless Microwave Motion Sensor Switch
Product Information
The R56 is a weather detection device that can detect temperature, humidity, wind speed, wind direction, rainfall, UV, and light intensity. It has a detection range of -40°C to 70°C for temperature, 1% to 99% for humidity, 0 to 12999mm for rainfall, 1 to 16 for UV, and 0 to 200Klux for light intensity. It uses FSK 915MHZ transmission mode and has a built-in low voltage detectionfunction. The device is solar-powered for backup and has an LED indicator that flashes when the unit transmits a reading. The manufacturer of the device is FUJIAN YOUTONG INDUSTRIES CO.,LTD.
Product Usage
- After power-on or reset, the device will automatically detect wind speed, wind direction, rainfall, UV, light intensity, temperature, and humidity.
- The data will be sent once, and the LED will flash synchronously once.
- The device can send different formats of data such as temperature, humidity, and low voltage.
- The device has a built-in low voltage detection function that does not require any peripheral components.
- The detection time is when the emitting LED is on.
- In case of interference, the device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
- If you experience interference, try reorienting or relocating the receiving antenna or increasing the separation between the equipment and receiver. You can also connect the equipment into an outlet on a circuit different from that to which the receiver is connected or consult the dealer or an experienced radio/TV technician for help.
Model number: R56
Description:
Main Features
- Temperature detection, detection range -40℃–70℃. Humidity detection, detection range 1%-99%.
- Wind speed detection, Real-time wind speed.
- Wind direction detection, 16 directions.
- Rainfall detection, detection range 0-12999mm.
- UV detection, detection range 1-16.
- Light intensity detection, detection range 0-200Klux. Low voltage indication.
- FSK 915MHZ transmission mode.
- LED indicator. Flashes when the unit transmits a reading 1 function button.
- Solar power for backup.
Operating instructions
After power-on or reset, wind speed, wind direction, rainfall, UV, light
intensity, temperature, and humidity are detected, data is sent once, and LED
flashes synchronously once.
Send formats include: temperature, humidity, low voltage, etc.
Built-in low voltage detection function, no peripheral components, cost saving.
- Detection time: when the emitting LED is on.
- Manufacturer: FUJIAN YOUTONG INDUSTRIES CO.,LTD.
- Address: North part of 1st, 2nd~3rd floor, Building 1#, M9511 industries park, No.18, Majiang Road, Mawei DISTRICT, Fuzhou City, Fujian, China
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth foran
uncontrolled environment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:(1) This device may not
cause interference.(2) This device must accept any interference, including
interference that may cause undesired operation of the device.