IKEA 404.408.32 UPPLYST LED Wall Lamp Instructions
- October 30, 2023
- Ikea
Table of Contents
IKEA 404.408.32 UPPLYST LED Wall Lamp
Product Information
The product is called UPPLYST and is an electrically operated device. It requires a maximum of 120VAC and 21mA at 60Hz. The device is intended for indoor use only and complies with part 15 of the FCC Rules. The device should not be used by children under 3 years of age.
Product Usage Instructions
- Before using the device, check that all parts are undamaged.
- Plug the device into an indoor outlet on a circuit different from that to which other electric devices are connected.
- Turn on the device using the power switch.
- If the device emits harmful interference, try one or more of the following:
- Reposition the device and receiver to increase separation between them.
- Connect the device to a circuit that is different from that to which the receiver is connected.
- Consult a dealer or an experienced radio/TV technician for help.
- When mounting the device, choose screws and plugs that are suitable for the material in which they will be placed.
Note: Keep these instructions for future reference and do not use the device if any part is damaged.
IMPORTANT SAFETY INSTRUCTION
READ CAREFULLY KEEP FOR FUTURE REFERENCE
WARNING!
-
CAUTION – ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock. -
For indoor use only.
Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used. Important information! Keep these instructions for future use. -
Cleaning
Use a damp cloth, never a strong cleaning agent. -
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
INSTALLATION
WARNING– Strangulation hazard.
- NEVER place cord within reach of the child in a crib, playpen or toddler bed.
- ALWAYS secure cord to wall. Check regularly that the cord is securely fastened.
- Pull the cord to remove any slack between switch and both fasteners. Tie up any remaining slack cord between fastener and socket.
- Please see illustration of how to secure cord to wall further on in this document.
WALL MOUNTING
FCC
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>