Carnegy Avenue CGA-IS-500495-DA-HD Mid-Century Modern Loveseat Sofa Instruction Manual
- October 30, 2023
- Carnegy Avenue
Table of Contents
Thank you for your purchase!
Mid-Century Modern
Loveseat Sofa
Instruction Manual
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you
begin. Carefully remove all of the components from the packaging and set aside
for assembly. Assemble on a soft surface to prevent scratching during
assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in
personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to
product or components may result.
Warning:
CHOKING HAZARD – Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must
install Tipping Restraint Hardware (where included) to help prevent the unit
from tipping and causing accidental injury, instability, death or damage. The
tipping restraint is intended only as a safety measure, it is not a substitute
for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to
the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall
materials (if not included) should be purchased and installed.
Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of long-
lasting consumer relationships. We strive toward excellence in all we do and
want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email address
or phone number shown below to assist you with any product questions or issues
before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any
issues you may have.
Customer Service Email:
CustomerExperience@belnick.com
Customer Service Phone: 866-552-2810
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product is warranted from the original purchase date and to the original purchaser for normal usage, according to the below-referenced specifications and limitations.
- Non-moving metal parts are warranted for 5 years.
- Component parts including pneumatic cylinder, control mechanism, base and casters are warranted for 2 years.
- All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and weight limits
specified for the product. In the absence of product-specific restrictions and
weight limits, normal usage means use for no more than forty hours per week by
persons weighing 250 lbs. or less. Coverage terminates if the product is sold
or otherwise transferred. Repairs made by parties other than Belnick also void
this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse,
abuse, negligence, alteration, assembly, installation, attachments, accident,
vandalism, acts of nature or any other event beyond the control of Belnick;
(2) tearing, scratching, scuffing, or blemishing of leather or fabric; (3)
cosmetic damage that may result from normal usage; (4) damage attributable to
use by persons exceeding specified weight limits or commercial use exceeding
forty hours per week; or (5) rust or other damage caused by exposure to
moisture. The user assumes all risk of injury resulting from use of this
product. Liability for incidental or consequential damage is excluded.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
PARTS
STEP 1
STEP 2
Insert (1) Wood dowel (Part D) into the upper hole in Back Legs (Part 5)
STEP 3
Insert the Front Legs (Part 4) into the underside of the Sofa Seat and turn
clockwise to tighten. Insert Dowel Rods already assembled in Rear Legs (Part
5) into the bracket on the underside of the Sofa Seat. Using (2) M8 x 60MM
Bolts (Part A) and (2) Lock Washers (Part B) complete the installation of the
Rear Legs.
Tighten using an Allen Wrench (Part C).
STEP 4
Return sofa to the upright position and insert the brackets on the Right Side Panel (Part 2) and Left Side Panel (Part 3) into the receiver Brackets on the side of the sofa.
STEP 5
Slide the brackets on the Back Panel (Part 6) into the receiver brackets on the inside of Right Side Panel (Part 2) and Left Side Panel (Part 3).
Place Back Cushions (Part 7) and Bolster Cushions (Part 8) onto Sofa.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>