Blast Auxiliary 30681 Premium Air Cleaner User Manual

Blast Auxiliary 30681 Premium Air Cleaner

Blast Auxiliary Premium Air Cleaner
The Blast Auxiliary Premium Air Cleaner is a portable air purifier that is suitable for home, office, and car use. It uses a combination of long-lasting HEPA filters, an activated charcoal filter, and anion technology to remove pollutants like dust, smoke, and bacteria from the air.

Product Parameters

• Dimensions: 74 x 74 x 171 mm
• Material: ABS; Plating; PCB
• Weight: 8.5 oz (240 g)
• Input Voltage: DC5-6V Max (± 10%)
• Working Current: 400 – 850 mA
• Working Power: 4.5 W
• Coverage Space: 5-10 square meters

Fan Working Current:

• Low: 450 mAh
• Medium: 600 mAh
• High: 820 mAh (± 10%)

Fan Rated Power:

• Low: 2.25W
• Medium:3W
• High: 4.25W

Anion Concentration : 8 x 106PCS/cm3 (test distance: 100 mm from generator)

• PPM: < 0.05 PPM
• Executive Standard: GB4706.45-2008
• Inspection: Qualified
• Made in : Shenzhen, China

PARTS

1. Air quality indicator
2. Function button
3. Fan/Ionizer Indicator Lights
4. Main fan unit
5. HEPA Filter
6. Air intake vents
7. Base to hold HEPA filter

How to Use Your Air Cleaner

1. Connect the Type-C cable to the Premium Air Cleaner.
2. Tap the function button once to put the Premium Air Cleaner fan in automatic mode. Tap the function button repeatedly to go through the three different fan speeds.
3. Once you’ve reached High speed, press the function button again to switch the Premium Air Cleaner off.

How to Use the Negative Ionizer

1. Press and hold the function button to enable anion (negative ionizer) mode. A white indicator light will blink once the mode is switched on.
2. Press and hold the function button again to disable anion mode.
   Note : The anion mode can be enabled/disabled from any fan speed

Quick Use Guide

How to Read the Air Quality Indicator

• Red – Dirty air
• Blue – Average-quality air
• Green – Clean, filtered air

Note : When the Premium Air Cleaner is switched on, the red, green, and blue indicators will all fight up. You’ll then see the green indicator light for around 3 minutes. Then, the Premium Air Cleaner will switch colors depending on the air quality in the room.

How to Change the Filter

Note : Use only the official Blast Auxiliary Premium Air Cleaner Filter available via blastauxiliary.com.

Safety Reminders

1. Clean the filter every 2 weeks, and replace it with a new Blast Auxiliary Premium Air Cleaner Filter every 3 months.
2. When cleaning the filter element, do NOT wash it with water. Instead, use a hair dryer to blow on the inside of the filter element, or use a soft brush (such as a toothbrush) to clean the dust on the surface of the filter. Take care not to damage the filter element.
3. Do NOT spray corrosive liquids such as essential oils, perfumes, and colognes on the filter.
4. The Blast Auxiliary Premium Air Cleaner is designed for areas of 5 to 10 square meters.

Package Inclusions

• 1 x Premium Air Cleaner
• 1 x HEPA filter
• 1 x Type-C USB Charging Cable
• 1 x User Manual
• 1 x Warranty Slip

Customer Service

• Thank you for choosing Blast Auxiliary!
• Have questions about our products? You can contact our helpful customer service team by going to support.blastauxiliary.com or by scanning the OR code below. We’re always happy to help!

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EPA Est. No.100619-CHN-1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>