REKKORD AUDIO F 100 EasyLounge Hi-Fi Turntables Instruction Manual
- June 4, 2024
- REKKORD AUDIO
Table of Contents
REKKORD AUDIO F 100 EasyLounge Hi-Fi Turntables
Overview
- Dustcover
- Hinge
- Cue control
- Speed selector
- Tonarm support
- Start-Stop-Switch
- Stylus
- Phono cable
- Ground
Preliminary operations
Unpack the unit and all accessories. Please keep the packaging for future use when transporting the device. Insert the hinges 2 in the appropriate recesses (fig. 1). Slide the cover 1 parallel to the position of hinges 2 (opening angle approximately 60°) until it locks in position. In this position, the cover can be removed at any time.
Power supply
The delivered power supply will be connected to socket 6 (fig. 2) at the back
of the device. The mains set, corresponding to the voltage indicated on the
nameplate has to be plugged into a power-supply plug either with 230V/50 Hz or
115 V/60 Hz on the primary side.
Connection to amplifier or preamp (F100)
Connect the phono cables 8 to the phono-magnetic inputs of the amplifier or
preamp (red or black RCA-type plug = right channel, white RCA-type plug = left
channel).
Connect Ground 9 to the ground connector of your amplifier or preamp.
Connection to amplifier (F100 P)
Connect the phono cables 8 to a Line Input (CD/AUX) of your amplifier (red or
black RCA-type plug = right channel, white RCA-type plug = left
channel). Ground 9 has no function in this case.
Automatic start, speed selection 33/45
The speed must be selected according to the record which is in place. If the turntable speed is set to 33 or 45 rpm 4 the record size is automatically selected for the automatic start. Remove stylus cover forwards for the pick-up stylus and move switch 6 to Start. The pick-up arm automatically lowers onto the record.
Manual start, stop
The speed must be selected according to the record which is in place. Use switch 6 to select a speed of 33 or 45 rpm. Remove stylus cover forwards and move lift lever 3 into position . Now position the tonearm over the lead-in groove of the record. The tonearm can now be lowered slowly onto the record using the cueing lever 3 , thus preventing damage to your records. The tonearm can be raised at any position, also for brief interruptions when playing, by using the cue control lever (cueing in position ). The platter continues to rotate in this case.
At the end of the record, the tonearm is automatically repositioned back on the tonearm post, and the unit is switched off. You can also switch off the turntable by setting switch 6 to Stop or setting the cueing lever 3 to position and reposition the tonearm on the tonearm rest.
Safety precautions
CAUTION!
To prevent the risk of fire or electrical damage, do not expose the device to
moisture or rain. Please do not open the device! Keep the packaging material,
such as plastic foils, away from children. The danger of asphyxiation by
misuse.
Disposal of electrical appliances by consumers in private households within
the EU
At the end of its lifetime, do not throw the device away with normal household
waste. Ask about the options for environmentally sound disposal at the local
authorities, at recycling centers, or where you purchased the device. This
product complies with applicable EU regulations.
Technical data
More info
www.rekkord-audio.com
Ask us
Technicalquestions: support@rekkord-audio.com General questions: info@rekkord-audio.com
REKKORDAudio
a Divisionof AudioTuningVertriebs GmbH.
- Billingaddress: Margaretenstrasse 98 A-1050Wien AUSTRIA.
- Headquarter &Logistics: Wirtschaftspark A5 Mistelbach/Wilfersdorf Analogweg 1,2130Mistelbach AUSTRIA.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>