Bonfino Compass Isofix Car Seat User Manual
- October 30, 2023
- Bonfino
Table of Contents
Compass Isofix Car Seat
User’s Manual Age Group
0+ MONTHS
Special Injection Mold Structure
Premium Linen Fabric Cushion
4-Level Reclining & 7 Position Headrest
Parts & Accessories
1. ISOFIX Insertion Aids
2. ISOFIX Fastening Points(vehicle)
3. Headrest
4. Seat Cover
5. Shoulder Pads
6. Shaulder Straps
7. Harness Buckle
8. Crotch Pad
9. Adjustment Buttan
10. Adjustment Strap
11. 360° Rotation Adjuster
12. Seat Reducer
13. Buckle Tongues| 14. Red Release Button
15. Belt Guidance
16. Recline Handle
17, Base
18. Shoulder
Straps Connector
19, Headrest Height Adjuster
20. Top Tether Adjuster
21. Top Tether
Clip
22. ISOFIX Locking Arms
23 ISOFIX Buttons
24. Shoulder Pads Connector
25. Belt Guidance
---|---
Note – Please take a few minutes to read this manual. This will help you
assemble and use the car seat suitably. Keep this manual for future reference.
Before assembly. please double check all parts as shown are included in the
package. For any missing or defective parts, or sharp edges, please contact
customer service immediately. To guarantee the service life of the car seat,
please use it correctly under the instructions and make it through inspection
regularly. Never use it if any parts are missing or broken
How to Use
A.1SOFIX
1.1 Ifyour vehicle i not ited with ISOF X insertion aids as standard, clamp
the bwo ISOF X nsertion aids 1), which are included n the seat, with the
‘opening pointing upwards, to the two ISOFIX fastening points (2) of your
vehicle. fyou dorit have ISOF X insertion aids (1), lease ignore this step
1.2 Press the ISOFIX buttons (23) to push out the two ISOFIX locking arms (22) from the seat base.
1.3 Push back the child safety seat ki the child safety seat s reting firmly against the vehicl seat as you hear a Clicking sound which indicates they are fully engaged. And on both sides of the ISOFIX indicator changes from red to green (safety) color.
1.5 Move the child safety seat backwards and push the backrest against the vehicle seat.
B. Rotation
2.1 Press the 360° rotation adjuster (12) with the thumb rotating the seat shell
2.2 Rotate the seat shell so it is facing either forwards or backward depending on the weight of your child, untilit engages with a clicking sound.
C. Seat Angle
3.1 The seat shell of this car seat can be used in 4 different reclined
positions facing forwards and in fifth level position facing backwards: Pull
the recline handle (13) up. then the seat can be adjusted. It can be adjusted
to 4 positions for forward-facing use. When the seat is n the position of the
fourth level,rotate the seat to the rearward direction, and the seat can be
adjusted to the fifth level.
3.2 O-18 kg rearvard-facing installation,use the fith level
3.3 9-18kg: forward-facing installation, use the first level to the
fourth level
15-36kg: forward-facing installation. use the first level
D. Put the Child in
4.1 Loosen the shoulder straps (6) by pressing the adjustment button (8] and
pull both shoulder straps forwards, loosening them as much as possible.
4.2 Press the red release button 17) to open the harness buckle (7). Place the child i the safety seat.
4.3 Bring both buckle tongues (16) together. Lack buckle tongues in harness buckle (7). until they engage with a cicking sound.
4.4 Pull the headrest height adjuster (18], select the carrect height of the headrest (3) and engage it in a position that fits your child by releasing the adjuster.
4.5 Adjust the headrest (3) to the proper position. Make sure the distance between the child’s shoulder and the bottom of the headrest is lower than one finger.
4.6 Pullthe adjustment strap (10) until the strap lies flat and snug on your child’s body. Make sure that the shoulder straps are slightly higher or equal to the child’s shoulders.
E. Store 5-Point Harness
5.1 Once the child reaches a weight of 5k, the 5-point safety harness
should be stored away and the child should be secured with the vehicle belt.
Open the harness buckle (4.2) as shown. Remove seat reducer (15] and crotch
pad (8).
5.2 Loosen shoulder straps (6] and then remove shoulder pads straps according to the shoulder pads connector.
5.3 Tear off the velcro and remove the shoulder pads.
5.4 Open seat cover (4).Hide shoulder straps (6) and buckle tongues (16) under the cover and hide the harness buckle (7) to the storage.
Reattach the 5-point harness:
Follow the steps for <store 5-point harness> in reverse order.
Rearward-facing (0-13KG) Installation
Install the child safety seat with belt
6.1 Pul out the vehicle belt and lack into the vehicle seat buckle, with the diagonal belt bypassing the rear of the seat. Place the diagonal beltin the same position and the upper part goes through the gap between the headrest and backrest. Open the harness buckle with the lap belt going between the seat reducer(15) and the backrest.
6.2 Tighten the vehicle belt in the direction of the arrow as shown, adjust the lap belt first. then the diagonal belt, which must pass between the headrest and the backrest. Ensure the vehicle belt is not tuisted.
Rearward-facing (0-18KG) Installation
Install the child safety seat with ISOFIX + TOP TETHER
7.1 Pull out the top tether, by pressing the top tether adjuster (20) button.
7.2 Pul the top tether long enough to hang the top tether clip (21)on
the fixed point, which s on the back of the vehicle seat:the position of the
fixed point s shown in the picturelone of the A/B/C positions).
Make sure the top tether goes through the gap between headrest (3) and
backrest
7.3 Make sure the top tether strap is tightened up and make sure the top tether adjuster (20) indicator turns into green safety color
Forward Facing (8-18KG) Installation
Install the child safety seat with BELT or BELT + ISOFIX
8.1 Pullout the belt from the belt ALR (Automatic Locking Retractor ). The diagonal belt passes through the gap between the headrest and backrest. then pullthe diagonal belt and lap belt together through the other side guidance (25) on the seat base.
8.2 Lock the tip of the buckle into the vehicle seat buckle with a clicking sound. Follow the direction of the arrow to tighten the belt, and put the redundant belt into ALR. Shake the child safety seat to make sure it is securely attached.
Forward Facing (15-36KG) Installation
Install the child safety seat with only BELT or BELT + ISOFIX or BELT + ISOFIX
- TOP TETHER
9.1 Pull out the belt from the belt ALR (Automatic Locking Retractor ). The diagonal belt passes through the same side of guidance (1) on the headrest, then pull the diagonal belt and lap belt together through the other side guidance (25) on the seat base.
9.2 Lock the tip of the buckle into the vehicle seat buckle with a clicking sound. Follow the direction of the arrow to tighten the belt, and put redundant belt into ALR. Shake the child safety seat to make sure itis securely attached.
Remove Harness Buckle
10.1 Open the harness buckle (62)as shown. Remove crotch pad (6) Lift up the seat cover,pull down harness buckle (7) across seat cover (4)
10.2 Rotate the metal plate on crotch straps by 90° vertically and then take out the harness buckle (7)from the slot (D). To re-install harness buckle (7) follow the steps referred to (10.2) n reverse order untilthe metal plate i hooked into the harness slot. Thread the hamess buckle (7) through the crotch pad (8) on the cover. Make sure the metal plate is under slot () when you are usingit,
For Your Child’s Safety
-
Airbags can cause injury. Do not use this child seat on a passenger seat fitted with a front airbag unless it can be deactivated.
-
Buckle failure will cause injury. Do not oil any part of the buckle.
-
Always check there is no food debris or other such matter in the harness buckle,
-
Never use the car seat without the backrest as it will not protect your child in the event of an accident,
-
Acorrectly adjusted harness s essentialfor your child’ protection. There should not be more than twa fingers width between the harness and your chil.
-
Toxic leaning luids can cause damage. Never use bleach, do not iron, o not machine wash, do not tumble ry as this could damage the cover and require replacing.
-
Always replace the car seat after an acciden, in case of any unseen damage.
-
Do not use the car seat without the seat cover. Do not replace the seat cover with any cover other than the one recommended by the manufacturer, as it directly influences the safety performance of the car seat.
-
Ensure that your car seat s secured at al times while in the vehicle sing the vehicle’s seat belt or ISOFIX system, even when not n use. An unsecured car seat can cause injuries in the event of a collsion.
CAUTION
Keep these instructions with the car seat in case you need to rfer to them again in the future. Failuretofollow these inslructions may afect your childs afety. -
Your car seat must be positioned and installed so that, under normal vehicle usage conditions, no part can become jammed under or between any moveable seat or in the vehicle door.
-
Do not modify or add to your car seat in any way without the approval of a competent authoriy or the manufacturer, as this will void any warranty.
-
Shade your car seat from sunlight to avoid hot items causing injury to your child
-
Do not leave your child unattended when in the car seat and in the vehicle.
-
Make sure there is no loose luggage or other large objects that ar likely to cause injuries in the event of an accident, These may cause injuy to ather occupants. Always secure loose items.
-
Make sure al hard or plastc parts are stored away when not in use and therefore cannot be: misplaced.
-
During cold winter conditions take care that any change of clothing has not reduced the tension and effectiveness of the car seat harness,
Care & Maintenance
- The cover can be removed and washed with a mild detergent in a washing machine.
- The baby reducer can be washed in the same way as the cover. Remove all foam parts from the top and bottom sections before washing. These must not be washed.
- The shoulder pads can be removed and washed in lukewarm soapy water
- The plastic parts and the harnesses can be cleaned with soapy water. Do nat use any caustic cleaning agents (such as solvents).
- Soak the harness buckle (7)in warm water containing washing-up liquid for at least an hour. Rinse the buckle thoroughly and dry it
Notice
This car seat is a“Universal” child restraint system. It has been approved in
accordance with regulation ECE Ré4/04, and i suitable for general use in
vehicles that are fitted with 3 point static or retractable lap and diagonal
seat belts approved to ECE RIB and with ISOFIX. anchorages approved to ECE RI4
This chid restraint s likely to fit f the vehicle manufacturer states that the
vehicle approval specifies suitability for “Universal” child restraint systems
Class A, B, Bl.
This restraint system s classified as “Universal”in accordance with the
strictest approval criteria, whereas earlier models do not correspond to these
new provisions.
This restraint systemis classified as “Universal” s and is suitable for fixing
into seat positions according to the vehicl fiting st provided.
If in doubt, contact the manufacturer or retailer of the car seat.
Imported for & Marketed By:
Brainbees Solutions Put, Ltd
Corporate And Registered Office Address:
Rajashree Business Park, Plot No.114
Survey No.338, Tadiwala Road,
Near Sohrab Hall, Pune 411001
For any feedback contact:
Customer Care Executive No: +91-135-3501241
or E-mail:customercare@brainbees.com
Customer care Address:
Same as Marketer’s Address.
Documents / Resources
|
Bonfino Compass Isofix Car
Seat
[pdf] User Manual
Compass Isofix Car Seat, Compass Isofix, Car Seat, Seat
---|---