C150 150W CO2 Laser Tube User Manual
- October 30, 2023
- CO2
Table of Contents
****
C150 150W CO2 Laser Tube
Product Information: C150 150W CO2 Laser Tube
Overview
The C150 150W CO2 Laser Tube is a professional-grade glass laser tube
designed for use in laser engraving and cutting machines. It is a spare part
for laser machines that can engrave and cut acrylic, cloth, leather, bamboo,
wood, paper, and most non-metal materials.
Features & Details
- The laser tube is coated with special catalysts, which improves its performance and longevity compared to other similar laser cutting tubes.
- The model#C150 150W CO2 laser tube is very professional and is the main spare part of CO2 laser engraving and cutting machines.
- It supplies strong energy laser during engraving and cutting.
Technical Parameters
- Rated Power Output: 150W
- Length: 1650mm
- Beam Diameter: 6mm
- Wavelength: 10.6um
- Material: Boron Silicate Glass
- Outer Diameter: 80mm
- Trigger Voltage: 30KV
- Working Voltage: 22KV
- Optimal Operating Current: 28mA
- Gross Weight: 6.8kg (14.99lbs)
- Package Size: 180.8 x 17.5 x 20.5cm/71.18 x 6.89 x
8.07inch
Product Usage Instructions
- Ensure that the laser engraving or cutting machine is turned off and unplugged before installing the C150 150W CO2 Laser Tube.
- Locate the laser tube compartment in the machine and remove the old laser tube if necessary.
- Carefully insert the C150 150W CO2 Laser Tube into the compartment, making sure that it is securely in place.
- Connect the wires to the laser tube according to the machine’s wiring diagram.
- Turn on the machine and test the laser tube to ensure that it is functioning properly.
Note : It is recommended to consult the machine’s user manual for specific instructions on installing and operating the C150 150W CO2 Laser Tube.
Product Instruction
Professional co2 glass laser tube, mainly used in laser engraving machine, laser cutting machine. It is a spare part for laser machines that can engrave and cut acrylic, cloth leather, bamboo, wood ,paper and most of other non metal materials. Our CO2 laser tube in model#C150 150W (1650mm*80mm) adopts the uses German Schott discharge tube and special coating technology to improve the performance of the laser tube. It is definitely your best choice!
Features & Details
- 【HIGH TEMPERATURE RESISTANCE】- This co2 laser tube is made of the boron silicate glass that is also applied on the solar tubes. It is resistant to high temperature and high pressure.
- 【TEMOO MODE】- This co2 laser tube adopts the TEMOO mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. At the same time, the use of output mirrors further enhances the mode.
- 【SPECIAL COATING TECHNOLOGY】- The inside of the discharge tube (imported German Schott tube)uses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold.
- 【LONGER SERVICE LIFE】- Our service life of discharge tubes coated with special catalysts is much improved. Compared with other same kind laser cutting tubes, our 150W co2 laser can last longer.
- 【VARIOUS APPLICATION】- Model#C150 150W co2 laser tube is very Professional, as the main spare parts of co2 laser engraving and cutting machine, it supplies for the strong energy “laser” during engraving and cutting.
Technical Parameters
- Rated power output: 150W
- Length: 1650mm
- Beam diameter: 6mm
- Wavelength : 10.6um
- Material : Boron Silicate Glass
- Outer diameter: 80mm
- Trigger voltage: 30KV
- Working voltage: 22KV
- Optimal operating current: 28mA
- Gross Weight: 6.8kg(14.99lbs)
- Package Size : 180.8 x 17.5 x 20.5cm/71.18 x 6.89 x 8.07inch
Installation Drawing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>