Rebel URZ3266 Wireless Doorbell User Manual

June 4, 2024
Rebel

Rebel-LOGO

Rebel URZ3266 Wireless Doorbell

Rebel-URZ3266-Wireless-Doorbell-PRODUCT

SAFETY INSTRUCTION

Read this instruction manual and keep it for future reference.

  1. Protect this product from moisture. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
  2. The device is not a toy. Children should be supervised to ensure that they do not play with the device.
  3. Disconnect from power outlet if the device is not going to be used for a long time.
  4. Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
  5. Always disconnect the product form the power mains before cleaning.
  6. Devices range may be decreased, if placed near other electronic devices.

PRODUCT DESCRIPTION

  1. Next melody
  2. Previous melody
  3. Volume button
  4. Mode button

OPERATION

  1. Tear off one side of the double-sided tape and stick it to the back of the button.
  2. Tear off the other side of the double-sided tape and stick the button in the chosen place, then press it gently to ensure proper assembly
  3. The transmitter and receiver are paired by default. If there is no pairing or adding another transmitter, follow these steps:
  4. Press and hold mode button for about 3 seconds, until you hear bird voice melody.
  5. Press the button on the transmitter twice within 30 seconds.
  6. Successful pairing will be signaled by a sound signal
  7. To add another transmitter, repeat the procedure
  8. To reset pairing, press the mode button for about 10 seconds until you hear a double beep.

CLEANING AND MAINTENANCE

  1. Clean this device with a soft, slightly damp cloth.
  2. Do not use any chemical agents to clean the device.

SPECIFICATION

  • 36 tones
  • 4 volume levels
  • Protection class : IP55
  • Range : up to 150 m (open space)
  • 2 USB ports (5 V, 2 A)
  • Volume range : 25 – 85 dB
  • Work frequency : 433 MHz
  • Max. radio emission power: 3,01 dBm
  • Receiver standby power : < 0,5 W
  • Power supply : 100 – 240 V, 50 – 60 Hz

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) It is forbidden to place equipment waste marked with the symbol of a crossed-out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health. Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals