TOYOTA 2RZ-FE RZ Engine User Manual
- June 10, 2024
- Toyota
Table of Contents
TOYOTA 2RZ-FE RZ Engine User Manual
IGNITION TIMING INSPECTION
-
WARM UP ENGINE
Allow the engine to warm up to normal operating temperature. -
CONNECT TOYOTA HAND-HELD TESTER OR OBDII SCAN TOOL
(a) Connect the TOYOTA hand-held tester or OBDII scan tool to the DLC3.
(b) Please refer to the TOYOTA hand-held tester or OBDII scan tool operators manual for further details.
-
CHECK IGNITION TIMING
(a) Using SST, connect terminals TE1 and E1 of theDLC1. SST 09843-18020
HINT:
After engine speed is kept at about 1,000 rpm for 5 seconds, check that it returns to idle speed.
b) Using a timing light, connect the test probe to the No.1 high-tension cord.
(c ) Check ignition timing. Ignition timing: 3 – 7° BTDC @ idle
(d) Remove the SST from the DLC1. SST 09843-18020
-
FURTHER CHECK IGNITION TIMING Ignition timing: 4 – 17° BTDC @ idle
HINT:
The timing mark moves in a range between 4° and 17°.
-
DISCONNECT TOYOTA HAND-HELD TESTER OR OBDII SCAN TOOL AND TIMING LIGHT
Portions of materials contained herein have been reprinted under license from Toyota Motor Sales, U.S.A., Inc., License Agreement TMS1004