EGATE i9 Pro Full HD Projector User Manual

i9 Pro Full HD Projector

User Manual

Notice

How to use the projector correctly:

1. Do not face the lens by eyes, it will hurt your eyes from the hard Light of the projector when it’s working.
2. Do not block the air outlet, to avoid damage from the internal electronic device by the projector can not cool.
3. Do not use chemicals, Cleaner or water to clean, and also avoid rain, moisture and leucocratic liquid to corrode circuit board.
4. Please put the projector and accessories in a place that children can not reach.
5. Please make sure the projector working environment is dry and windy.
6. Do not place the projector in a too warm or too cold room, the high temperature or low temperature will shorten the lifespan of the device. The working environment would be 5°C~35°C better.
7. Do not put the projector in heating equipment (drying machine, microwave oven)to make it dry.
8. Do not press hard or put something heavy on the projector, it will damage the projector.
9. Do not throw, beat, or shake the projector, it will damage the circuit board in it.
10. Do not dismount the projector. Please contact after-sales service if you have any problems.
11. Do not fix by yourself. If the projector can not work normally, please consult with after-sales service or depot repair.

Product Overview

Note:
please refer to the product appearance, this figure ts for reference only.

1. Power
2. Arrow Keys
3. Confirm
4. Menu Button
5. Signal Source
6. Back
7. Lens Focussing
8. Keystone Correction
9. Audio, Video Input
10. Earphone/3.5mm Audio Out
11. Video HD1 Input
12. VGA Input
13. Media Card
14. Video HD2 Input
15. Multimedia Input
16. Power Input(110-240V)

Remote Control

1. Mute button: turn on or off the sound output of the projector.
2. Zoom keys: the screen will display the switch to 16: 9/4: 3 or zoom mode.
3. Power button: Switch standby or working status of the projector.
4. 5. Flip key: images
5. Flip/upside down.
6. Energy saving mode: listen Separately (only sound in this mode).
7. /10. volume keys: volume up / volume down.
8. /9/11/12. Playback button: fast forward / rewind / previous/next track.
9. Play the Pause button
10. 16/18/20. arrow keys: The menu mode parameter is used to adjust the projector.
11. Signal selection key: Switch the input signal source
12. OK button to confirm
13. Menu key: call up or exit the projector’s main menu
14. Exit function key
15.  image mode fast bond
16. Music mode shortcuts
17. Freeze: When playing a video, press this button to freeze the screen

Note: No.2, No.22, No.23, and No.24 buttons can only work under AV/HDMI /PC-RGB input signal source

Power

1. Plug the power cord into a Power outlet.
2. Press the button “©” on the projector or on the remote control.

Keystone Correction
At different angles you put the projector,the projection will Deformation like a trapezoid, use the keystone correction to make it correctly.

Note: please refer to the product appearance, this figure is for reference only.
Image focus
Let the projector be perpendicular to the wall, with the Focusing button to make the picture clear. When focusing, you can broadcast programs to help you finsh focus.

Connecting

1. Signal source selection
   Press the projector front or the remote control signal source key °S”, and enter the signal source menu interface. Use the direction key and the confirmation key to select the signal source.

2. HDMI or VGA equipment connecting

3. VGA and HOMI interface can be connected with the computer and others with VGA HOMI output interface device.

4. Choose the media signal channel: “HOMI” or “PC-RGB” Add: Different brand laptop output keys are as follows:

The user of windows 7 or oven windows 7. Simply press the Pseiect copy to connect if the operation above is invalid Please update the co, the puter graphics driver.

1. AV video equipment connecting
2. Using the 3in video timeline comes with a pro;ect ar to connect with AV.
3. Choose the media signal channel.” Av
4. 3.5mm audio equipment connecting Support 3.5mm earphones and other «at +: sound equipment.

Maintenance and Simple Troub- the shooting of Projector

The smart projector is a high-tech product integrating precision optics, electronics, and machinery. The improper maintenance of the projector during daily use will affect its service life and effects.
For the maintenance, important attention shall be paid to:

1. Dust prevention: Excessive dust will affect the heat dissipation of the projector due to environmental impact. It is suggested to clean its dust filter for one and half months according to the actual environment.
2. Ventilation: As the projector integrates sound & photo-electricity, the optical source will produce heat during its operation. Therefore, during the installation and use, it shall be ensured that no objects around will block the air inlet and outlet of the projector as the heat dissipation depends on cold air convection to improve its working sta-  bility and service life.
3. Lens maintenance: Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality.  The dirty lens shall be wiped with a soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.
4. Cleaning: Excessive dust on the projector surface shall be cleaned in a timely manner, as it will affect the heat dissipation.
5. Moisture protection: The projector is vulnerable to damp air. Its operating humidity is about 45%- 60%. The too damp air will affect its working stability.
6. Vibration prevention: The projector shall be strictly protected from strong impact, extrusion, and vibration. Try not to move and knock the projector during its normal operation, which will cause internal circuit faults.
7. The projector shall not be installed on the unsta- ble, shaking, and uneven desk.
8. The container with liquid shall not be placed on the projector.
9. The power shall be switched off or the power cord shall be unplugged when not in use.

http://www.egatein.com
Email:supprt@egate.com
call:0 706517 9994/5
Shi To: Egate Service Centre,
503 5G Alipha Tower 11, Sec-9 Vasundhara Ghazipur UP 201010

Documents / Resources

| EGATE i9 Pro Full HD Projector [pdf] User Manual
i9 Pro, Full HD Projector, i9 Pro Full HD Projector, Projector
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>