HOMEMYSTIQUE BM3F Wall-Mounted LED Bathroom Mirror User Manual
- June 10, 2024
- HOMEMYSTIQUE
Table of Contents
USER MANUAL
WALL-MOUNTED LED BATHROOM MIRROR
Product Information
| Name | Wall-Mounted LED Bathroom Mirror |
|---|---|
| Model | BM3F |
| Voltage | 12V 4A |
| Lighting Power | Max 48W |
| Anti-fog Power | Max 30W |
| Input | UL110V |
| Product Size | 1220×610×29.5mm (48×24×1.2 inches) |
| Frame Color | Silver |
| Color Temperature | White Light 6500K, Natural Light 4800K, Warm Light 3200K |
| Material | Aluminium + Glass |
Product Installation
Accessories included
Step 1. Tray installation
- This mirror supports two wall-mounted methods, Horizontal or Vertical
- Fix the tray to the mirror according to your actual situation
a. Horizontal Screw holes located at the bottom left| b. Vertical Screw
holes located at the
bottom right| c. take off the sticker before installation| d. Put the tray on
and tighten with
screws
Step 2. Foam pads installation
1. Paste the foam pad to the back of the mirror| 2. Horizontal paste position| 3. Vertical paste position
Step 3. Wall-Mounted Ways and
Situation1 Hole-free installation (Only suitable for smooth glass or tiled
walls)
1. Stick the level vial closely on the hook| 2. Apply nail-free glue to the
back
of the hook| 3. Align the position and fix the hook to the wall, then wait at
least 48 hours to dry the nail-free glue
(better 72hrs)|
4. Hang up the mirror as above
demonstration and make sure
the hook goes into the slot of
the mirror frame
Situation2 Drilling installation
1. Use the level vial to choose a
suitable location on the wall and
mark it| 2. Drill holes and insert the
expansion tube into the hole| 3. Fix the hook with screws| 4. Hang up the
mirror as above
demonstration and make sure
the hook goes into the slot of
the mirror frame
Step 4. Two Ways Of Connection
1. connect to power source directly by using the plug
installed| 2. Through the connector provided, here is how:
a. remove the plug by pull up the buttons of the connector
b. connect the wire from your home power source to one end of the connect
c. make sure all wires settled firmly
Operating Instruction
Notice
For warranty , please kindly contact us for return policy if any issues
happen.
- Please read the instructions carefully before using.
- Make sure that your charging device is adequate for the mirror voltage rating before using.
- Turn off the power and avoid direct sunlight if not used or stored for a long time. Far away from children’s access.
- Please do not disassemble or remodel mirror, and keep it away from sharp things.
- Please do not use corrosive liquids to clean the mirror.
- Please do not violently throw, hit and rub mirror.
- Do not approach or put the product into the fire in case of fire or explosion.
- Please stop using it immediately if an abnormality occurs.