TUNDRA LABS Tracker Distributed Via SteamVR User Manual
- June 10, 2024
- TUNDRA LABS
Table of Contents
TUNDRA LABS Tracker Distributed Via SteamVR
Tracker
Tundra Tracker Driver installation
The latest driver of Tundra Tracker is distributed via SteamVR. Please make
sure you use the latest beta version of SteamVR to update the firmware of
Tundra Tracker.
Step1. Download SteamVR from Steam
You can find and install SteamVR here:
https://store.steampowered.com/app/250820/SteamVR/
Step 2. (Optional) Choose 11Beta11 version of SteamVR
If you want to try the latest features, pleas select “beta” mode on SteamVR.
- Right click “SteamVR” on your Steam Library
- Click “Properties”, go to the “Beta” tab, then select “opt in for beta” in the pulldown
Step 3. Update the firmware of Tundra Tracker
After pairing your Tundra Tracker with SteamVR, “i” mark will be shown on the
icon of Tundra Tracker if a new firmware is available. Please choose “Update
device” on SteamVR and follow the instructions.
Wireless Pairing
Step 1. Charge the tracker with a USB cable
Charge your Tundra Tracker until its LED color gets green.
Step 2. Connect a dongle to your PC
A Tundra Tracker can be paired with one dongle connected to your PC.
Step 3. Turn the tracker on
Press the power button on top of the tracker until its LED turns blue.
Step 4. Set SteamVR into pairing mode
On your PC, start SteamVR and select “Devices” -> “Pair Controller” -> “HTC
VIVE Tracker” on its menu.
- “Devices”-> “Pair Controller”
- “HTC VIVE Tracker”
- Pairing Mode
Step 5. Press and hold the power button of the tracker to pair
LED starts blinking in blue when it enters pairing mode. It turns green when
it’s paired with a dongle and Tundra Tracker’s icon appears on SteamVR window.
Connecting Tundra Tracker with USB
Step 1. Connect a Tracker to your PC by USB cable
With a USB A to USB C cable, plug a tracker into your PC. SteamVR will
automatically recognize and start tracking the tracker.
Tracker Hardware Specifications
Sensors
Tundra Tracker has 18 sensors as shown in the picture. Please avoid covering
any of the sensors during use.
Where to place your label or sticker
If you want to affix your label or sticker on a tracker, please use the blue
area in the picture, avoiding sensors inside. Base Plates
Tundra Tracker has two types of base plates.
- Base plate with ¼ inch female screw for camera mount and a hole for stabilizing pin:
- Base plate with strap loop (less than 1 inch width):
How to charge a tracker
Please connect a USB-C cable to a tracker, and the other side to your PC or
USB wall charger.
LED status
- Blue: Power on, but not paired
- Blue (blinking): Pairing mode
- Green: Paired/ Fully Charged
- Yellow/Orange: Charging
- Red: Battery is less than 5%
Battery Life
Tundra Tracker’s battery will last for 9 hours on average.
Supported Dongles
- Super Wireless Dongle (SW3/SW5/SW7) by Tundra Labs
- Dongle for VIVE Tracker, VIVE Tracker (2018) and VIVE Tracker 3.0
- Dongle inside headset of HTC VIVE series and Valve Index
Supported Base Station
- BaseStaion1 .0 by HTC
- BaseStaion2.0 by Valve
Tundra Tracker Frequently Asked Questions
How can I update the firmware of Tundra Tracker?
The latest firmware will be distributed via SteamVR.
How many Tundra Trackers can be used at the same time?
Depends on how many other SteamVR devices you use and the network environment.
You will find some useful tips here: https://forum.vive.com/topic/7613
-maximum-number-of-vive-trackers-2019-with-a-single-pc/
Can Tundra Trackers be used along other brands of SteamVR Trackers?
As Tundra Trackers are SteamVR devices, you can use mixed trackers.
How long does it take to charge Tundra Tracker?
TBD
How long does a Tundra Tracker’s battery last if it’s fully charged?
At least 9 hours on average.
Does the temperature of Tundra Tracker get high after using it for hours?
No, we don’t see any temperature increase on the surface of its base plate.
Please do not cover the top of Tundra Tracker to keep tracking accuracy.
Where can I download the 30 model of Tundra Tracker?
TBD
Can I use a magnetic charging cable for Tundra Tracker?
Yes. Please use a USB Type C connector.
Can I use a silicone skin for Tundra Tracker?
No, we do not recommend using a silicon skin as it will cover chips for
tracking inside Tundra Tracker.
Where shall I contact if my tracker is dead or broken?
TBD
List of software supporting Tundra Tracker
- VRChat {3 trackers supported as of September 2021)
- NeosVR (up to 11 tracking points)
- Virtual Motion Capture
- Virtual Cast … and more!
Can tundra Tracker be used with Oculus Quest or Oculus Quest 2?
TBD
Tundra Tracker Compliance Information
Tundra Tracker has compliance certification for the following regions:
Australia, New Zealand, European Union {CE), United Kingdom, United States
{FCC), Canada {ICED), Japan (TELEC), South Korea 
FCC – Regulatory Notices
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Permitted Antenna
This radio transmitter has been approved by the FCC to operate with the
antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with
this device.
Class B device notice
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED – Regulatory Notices
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with ISED license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation..
Permitted Antenna
This radio transmitter has been approved by the ISED to operate with the
antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with
this device.
Distance
There is no limitation as to which distance can be used from the human body.
CAN ICES-003 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Dongle
Dongle Quickstart
Step 1: Connect a dongle to your PC.
Plug in your dongle to the USB port of your Windows PC.
9 Dongle Hardware Specifications
LED status
TBD
Supported Trackers and Controllers
- Tundra Tracker
- VIVE Tracker, VIVE Tracker (2018) and VIVE Tracker 3.0
- VIVE Controllers and Valve Index Controllers
- Other controllers for SteamVR
Supported Base Station
- BaseStaion1 .0 by HTC
- BaseStaion2.0 by Valve
Dongle Frequently Asked Questions
How can I update the firmware of Super Wireless Dongle?
The latest firmware will be distributed via SteamVR.
Where is the best placement for the dongle?
The dongle is sensitive to interference, so ideally place it “in view” of your
Trackers (Not at the back of your computer), a top or front USB port is
recommended. If you are using a Valve Index, the Headset “frunk” is a great
spot for your dongle.
How many Trackers and Controllers can be paired at the same time?
3 devices can be paired with SW3, 5 devices can be paired with SW5 and 7
devices can be paired with SW7.
Can I place my SW dongle inside the Frunk of Valve Index?
SW3 and SW5 – yes. As for SW7, we do NOT recommend users to place it inside
the Frunk as it may get overheated.
Where shall I contact if my Dongle is dead or broken?
TBD
Super Wireless Dongle Compliance Information
