Caiord B0C1VZD3PT Temperature Bracelet Instructions

B0C1VZD3PT
Temperature Bracelet
Instructions

PREPARATION

Make sure that the power is sufficient before turning on.
Use USB charging port to charge
First remove the wrist band
Take out the fuselage
Plug into the USB charging head to charge
For the the first time, please take out the bracelet and charge the device wash the corresponding charger. When charging the bracelet wilt start up automatically (charging mode is shown in the figure beiow remove the bracelet body front the wristband and plug the charging port into the standard USB port to charge.)
WEARING METHOD

1. Best wear the wristband behind malleolus ulnaris;
2. Adjust the size suitable for the size of wrists via Adjustment Hole: Fasten wrist strap buttons;
3. Sensor shall be dose to skin avoiding moving.

POWER ON/OFF

1. In the state of the wristband shutdown, the long touch function key over 3 seconds can make the device vibrate.
2. When the wristband is in the boot state, it will switch to the shutdown Interface If the touch function key is more than 3 seconds, it can enter the shutdown interface. After the short touch is selected Off, it will touch the shutdown again.

OPERATION

1. When the device starts up. to touch function keys for a short bme period can lighten screen or switch over display;
2. The screen shall be turned off without operation and users can connect the mobile phone APP to revise off-screen time;
3. Switch to the heart rate and blood pressure interfaces to be tested automatically and leave the heart rate and blood pressure interfaces to stop tests.

INSTALL THE WRISTBAND APP

Scan the foltowing OR codes or enter into various large application markets to down’oad and install ” DaySand “.

|
---|---
https://play.google.com/store/apps/details?id=com.yc.dayband| https://apps.apple.com/cn/app/id1461078333

Device requirement: iOS8 0 and above: Android 4.4 and above to support bluetooth 4.0
DEVICE ATTACHMENT
When being used for the first time. It is necessary to connect APP for alignment. After successful connection, wristband will self-synchronize time, or otherwise, step calculation and sleep data won’t be accurate.

Open mobile phcre APP
Dick to set up icons
↓
My device iOSY search
equbment(Anorcid)
↓
Pull &on scarring equiprrent
↓
Click dews attachment

Bluctooth c,onsioction: alter successlly malaing. APP will automaticaly save the wistbend bluebocth addeess. When APP is opened or operated in backgraund. it will automaticaly search and link with the wistbend.
Data Synchronlsm: manualty pull down the synchronization data on the APP home page, the bracelet can store off-line data for 7 days, the more data, the longer the syncrumnization time is, and the longest time is about 2 minutes.

**APP FUNCTIONS AND SETTING

**

Personal information and exercise goals
After entering into APP. please first set up personal information
Setting→ Personal setting

• Head portrait gender, age, height and weight can be set up and personal information can enhance accuracy of data.
• Customize persona everyday exercise goals. A reasonable exercise plan is helpful for promoting body quality.

MAIN FUNCTIONAL INTERFACE

Main interface
When the Bluetooth icon is , it means the wristband is not connected to the cell phone.
When the Bivetooth Icon is , the connection is successful. When the wristband and APP are peired for the first time, the wristband will aynchronize the weather, time, date and week of the mobile phone.
Long press 3 seconds to switch the main interface
Temperature monitoring
In the Temperature monitoring interface, During the measurement, please wait for several tens of seconds for the data to appear.
When taking your temperature. wear it for more than 1 minute to be more accurate.
Motion Data
Display siep count, wristband default step counting mode, the wristband is worn on the wrist. When the user walks and arms swings. the wristband is recorded according to the number of steps.
Heart rate monitoring
In the heart rate monitoring interface, During the measurement, please wait for several tens of seconds for the data to appear.
Blood preseure monitoring.
In the Biood pressure monitoring interface, Ouring the measurement, please wait for several tens of seconds for the data to appear.
Blood oxygen monitoring
In the Blood oxygen monitoring interface, During the measurement. please wait for several tens of seconds for the data to appear.

• When the test, the icon wit beat and the beck heart rate of the hand ring LEO tignts will be lit:
• Vien testing, the sensor should stck lo the sign fo avo the infiuenoe of external light on the accuracy of the tast
• Tokoep tho test area clean, sweat or stars wit affact the test results.

Movement patterns
In the motion interface, long press for three seconds to enter the specific motion interface, which includes a number of movements. Click ta switch. In the mation interface, hold the button for three seconds to start the motion. hold the button for three seconds to pause, and click to switch the motion mode.
Information interface
In the message interface, long press three seconds to view the message, click page flip, view the message to exit or long press three seconds to exit.
More functional interface
In more features interface, long press three seconds to enter the iower menu interface for more functions.
Find phone interface
When connected, click on the “Find Phone” aption and the phone will sand a vibration reminder or ringtone reminder.
Restore setting interface
The interface is restored for three seconds. and the bracelet is restored to the factory settings.
About the wristband interface
On the wristband interface, the four digits and the version number of the Bluetooth address are displayed.
Shutdown interface
In the Shutdown interface, long press more than three seconds to shake the phone off.

PROMOTING FUNCTION

For promoting function, a promoting switch shall be switched on In APP-end Setting Center, mobile phone and wristband shall be kept to be connected successfully and there will be vibrating reminders when there are messages. Call reminding: when the miler calls. the ring will shake and the name or number of the caller is displayed. (if the caller’s name has been saved in the phone address book the name is displayed, otherwise the display number)
SMS resider: when a taxt message anmives the bracetet will vicrate and display the SMS icon reminder, the address message of the address bock contad person displays the name and the short message number of the stranger.
Intelligent alarm clock: It can set up three alarm cloocks, and will synchnize to the braoelet after setting up. The inteligent alarm clock is a slient alarm clock. When the alarm is on, the bracelet will cause moderate vibration, and support the alarm clock reminder.

PARAMETER

MATTERS NEEDING ATTENTION

Please avoid strong impact, extreme heat and exposure to the wristbandt.
Please do not disassemble, repair or transform the machine on its own.
The use of the environment is 0 degrees ∼ 45 degrees, and it is forbidden to throw it into the fire so as not to cause an explosion.
Please wipe the water, the wristband can be used only for the charging operation with a soft cloth, otherwise it will cause corrosion of charging contact point, charging fault. Do not touch the chemical substances such as gasoline, clean solvent, propanol, alcohol or insect repellent.
Please do not use this product in high pressure and high magnetic environment.
If you have sensitive skin skin or tighten the wristband, you may feel discomfort.
Please dry the sweat drips on the wrist in time. The strap has long contact with soap, sweat, allergies or pollution ingredients, which may cause skin allergy itching.
If it Is often used, it Is recommended to clean the wristband every week. Wipe with wet cloth and remove oil or dust with mild soap.
It is not appropriate to wear a hot bath with a wristband.
After swimming, please wipe the wristband in time so as to keep dry.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>