ASUS Prime A620M-A Motherboard User Guide

June 11, 2024
Asus

ASUS logo

ASUS Prime A620M-A Motherboard

ASUS-Prime-A620M-A-Motherboard

Product Information

PRIME A620M-A

The PRIME A620M-A is a motherboard designed for use with AMD A620 processors. It supports DDR5 DIMM modules and has several expansion slots for peripherals, including PCI Express and M.2 sockets. The motherboard features a variety of ports for connecting displays, USB devices, and other peripherals.

Product Usage Instructions

Step 1: Install the CPU

ASUS-Prime-A620M-A-Motherboard-1

To install the CPU, follow these steps:

  1. Locate the CPU socket on the motherboard.
  2. Open the socket by gently lifting the lever.
  3. Align the notches on the CPU with those on the socket and gently place it into the socket.
  4. Lower the lever to secure the CPU in place.

Step 2: Install the CPU fan

ASUS-Prime-A620M-A-Motherboard-2

The PRIME A620M-A supports two types of CPU fans. Follow the instructions below for the type of fan you have:

Type 1 Fan

  1. Locate the CPU fan header on the motherboard.
  2. Connect the fan cable to the header.

Type 2 Fan

  1. Attach the fan clips to the fan.
  2. Align the clips with the notches on the CPU socket.
  3. Gently press down on each clip until it clicks into place.
  4. Connect the fan cable to the CPU fan header on the motherboard.

Step 3: Install Memory Modules

ASUS-Prime-A620M-A-Motherboard-4

To install DDR5 DIMM memory modules, follow these steps:

  1. Locate the memory slots on the motherboard.
  2. Press down on the clips at each end of the slot to open them.
  3. Align the notches on the memory module with those on the slot and gently place it into the slot.
  4. Push down on the module until the clips snap into place.

Step 4: Install Storage Devices

To install storage devices, follow these steps:

  1. Locate the SATA ports on the motherboard.
  2. Connect one end of a SATA cable to a port on the motherboard and the other end to a storage device.

Step 5: Connect Peripherals

Install expansion card(s)

The PRIME A620M-A has a variety of ports for connecting peripherals. Follow the instructions below for each type of peripheral:

Displays

The motherboard supports HDMI, VGA, and DP displays. Connect your display to the appropriate port using a compatible cable.

USB Devices

The motherboard has several USB ports. Connect your USB device to a port using a compatible cable.

Audio Devices

The motherboard has an audio codec and AAFP port for connecting audio devices. Connect your audio device to the port using a compatible cable.

Step 6: Connect Power Supply Cables

Install the system panel connector

The PRIME A620M-A requires power from an ATX power supply.
Connect the following cables from your power supply to the corresponding ports on the motherboard:

  • 24-pin ATX power connector
  • 8-pin ATX 12V power connector

Step 7: Complete Installation

Install ATX power connectors

Double-check all connections and ensure that all components are securely installed. Close the case and connect any necessary peripherals. Power on the system to begin using your PRIME A620M-A motherboard.

Step 8 Connect input/output devices

ASUS-Prime-A620M-A-Motherboard-9

Step 9
Power on the system and install operating system and drivers

Motherboard Layout

ASUS-Prime-A620M-A-Motherboard-3

Australia Statement Notice

From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit https://www.asus.com/support/.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support/.

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polvbrominated diphenvl ethers (PBDEs) in concentrations exceedina 0.1% by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule Il of the Rule.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals