AVENO LIFE eSpirit Portable Massage Tables Instruction Manual

AVENO LIFE eSpirit Portable Massage Tables

Product Information

The AVENO LIFE stationary and portable massage tables are designed to provide a comfortable and convenient experience for users. The tables are constructed with a wooden top covered in upholstery, outer legs with spacers, a cable tension system,  suitcase lock, transport handles, nuts, armrests (for some models),headrest, arm shelf (optional), raised top (for some models), and a face hole plug. The tables come with a user manual and warranty for proper usage and maintenance.

Application

Portable rehabilitation tables enable the physiotherapist correct, safe and effective conduct of rehabilitation treatment, physiotherapy, physical therapy, massage, aiming at treating or alleviating the course of illnesses and the results of injuries /impairments. Used at the medical and doctor’s offices, they allow patients to adopt the correct posture for conducting effective and safe treatment or examination. The construction of the rehabilitation tables enables the physiotherapist easy and complete access to the patient from each side, thanks to which all various treatments produce desired results and ensure proper conditions for the conduct of a treatment/examination.

Construction of the portable table

1. Wooden table top covered with upholstery
2. External legs
3. External legs’ spacers
4. System of cables
5. Suitcase lock
6. Transport handles
7. Locking pin
   • a. Additional locking pin (regards Aura and Eden)
8. Armrests (regards Aura, Eden, Verona and Athena)
9. Headrest
10. Arms front shelf (additional option)
11. Elevated backrest (regards stołu Eden, Vesta i Athena)
12. Face hole filler

Operation

Sequence of unfolding the table:

1. Table in the folded condition constitutes a suitcase.
2. Open the lock (5).
3. Turn the table tops aside (1).
4. Draw out the equipment (8, 9 ,10) from the table inside.
5. Unfold the legs outside (2) maximally extended.
6. Put the table on a hard and even foundation. (Prior to loading the centre of the table top should be tilted up approx. 3 cm).
7. Check the tension of the system of cables (4).
8. Set the appropriate table height according to the table entitled ”Height adjustment”.
9. Install the headrest (9) and the remaining equipment (8, 10).
10. Lifting of the mobile part of the table takes place by means of:
    • a) unlocking elevated backrest,
    • b) lifting on the required height.*
11. Lowering of the mobile part of the table takes place by its maximum lifting and then lowering it down and locking.*

Height adjustment

Heated table top*

1. Turn on the table top heating by pressing the button ON/OFF on the remote control (1).
2. Set the requested temperature by pressing the buttons located below the HEAT ‘+’ or ‘-‘ (2) , in the range from 1 to 10. Heated table top warms up to a maximum temperature of 32° C.
3. Set the auto-off function by pressing the buttons located below the AUTO OFF ‘+’ or ‘-‘(3), in the range from 1 to 10. The digits represent the number of hours. By default, the heating will turn off after 1 hour. If we set 3, for example, the heating will automatically switch off after 3 hours, etc.

NOTE: When the heating in the tabletop switches off automatically, you can reset it by pressing the button ON / OF (1). If the letter ‘F’ displays on the remote control(4), disconnect the remote control from the table and the power supply, wait at least 20 seconds and reconnect it.

Laying the patient
The patient sits at the table side onto the upholstered top and adopts a comfortable horizontal position. The above-mentioned activities are safeguarded by the massage therapist, who determines the correct position on the table for the patients, and after the finished treatment helps them get down safely from the table.

Folding the table down

1. Dismount the headrest (9) and the remaining accessories (8, 10) (if any).
2. Reset the table from the working condition to the folding position (lateral position on the rubber feet). Fold the external legs paying attention to the correct location of the cables and their fastening parts.
3. Put the equipment inside the table, close the suitcase by means of lock (5) and Place the suitcase in the carry case (if any).

Disinfection, maintenance and cleaning

1. Lacquered elements. For cleaning products that do not contain abrasives are recommended.
2. Wood, plywood. Surfaces made of wood or plywood should be cleaned by means of soft damp cloth wiping them until dry. No chemical agents should be used. Notice! Wood as a natural raw material may have differences in the tree ring layout, differences in the shades as well as natural inserts like: streaks, dots. Such properties do not constitute a basis for a complaint.
3. Upholstery.
   • Avoid contact with oils. To do this, use oil-resistant or waterproof cover sheets.
   • Upholstery should be used and stored away from direct sources of fire and heat.
   • Upholstery should not be exposed to long-lasting sunlight.
   • Do not use: pastes, waxes, sprays, strong detergents, agents containing solvents, cleaning agents for natural leather.
   • Dirt from oils, creams must be immediately removed with a mild detergent solution (warm water with potassium soap solution) and a soft cloth or sponge.
   • Daily soiling should be cleaned with a mild detergent, preferably potassium soap solution with a sponge or soft brush. At the end, wipe the cleaned place with a damp cloth and then wipe dry.
   • Stronger spot soiling should be cleaned using a 25% solution of ethyl alcohol. Wipe gently with soaked gauze swab. At the end, wipe the cleaned place with a damp cloth and then wipe dry.
   • Disinfect if necessary disinfectants dedicated to PVC, PU upholsteries. After disinfecting the tabletop or the mattress with any disinfectant thoroughly dry up the upholstery before inserting it into the carrying case. Otherwise upholstery could be permanently stained.

Attention: Before using other agent than mild detergent you need to check its influence on the place out of eyeshot. Cleaning should be carried out carefully.

Exploitation remarks

1. The table is intended for use inside the dry and closed rooms and for the treatment of one person only at a time.
2. It is unacceptable to shift the table along with a patient on it. Rapid sitting on the table (jumping on), sitting, kneeling and basing on the headrest, shelves and armrests is forbidden.
3. While folding and closing the table attention should be paid to avoid snapping the cables.
4. The table should be used and stored far away from the direct sources of fire and heat.
5. Only after meeting the above recommendations there are no contraindications to use the product.
6. Each serious incident related to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and/or patient is established.

Technical data

Table| Length| Width| Adjustable height| Dimensions after folding| Weight without accessories| **Dynamic resistance*| Static resistance****
---|---|---|---|---|---|---|---
eSpirit| 184 cm| 64 cm 70 cm| 58 – 79 cm

58 – 79 cm

| 92x64x20 cm 92x70x20 cm| 13,0 kg 14,5 kg| 270 kg| 1000 kg
Aura| 184 cm| 64 cm| 61 – 87 cm| 92x68x18 cm| 13,4 kg| 250 kg| 900 kg
Eden| 184 cm| 64 cm| 61 – 87 cm| 92x68x18 cm| 14,5 kg| 250 kg| 900 kg
Elza| 192 cm| 71 cm| 62 – 87 cm| 96x71x18 cm| 15,4 kg| 250 kg| 900 kg
Olivia| 184 cm| 71 cm| 62 – 87 cm| 92x71x24 cm| 16,3 kg| 270 kg| 1000 kg
Verona II| 184 cm| 71 cm| 60 – 80 cm| 92x71x18 cm| 12,0 kg| 250 kg| 900 kg
Altus| 184 cm| 62 cm 71 cm| 60,5 – 81,5 cm

60,5 – 81,5 cm

| 93x62x20 cm 93x71x20 cm| 12,5 kg 13,5 kg| 270 kg| 1000 kg
Vesta| 184 cm| 71 cm| 61,5 – 81,5 cm| 92x71x20 cm| 16,8 kg| 250 kg| 900 kg
Luna Light| 184 cm| 64 cm| 61 – 81 cm| 92x64x20 cm| 10,3 kg| 270 kg| 1000 kg
Torina| 184 cm| 71 cm| 61 – 81 cm| 92x71x18 cm| 15,5 kg| 270 kg| 1000 kg
Fairlane Therma-Top Cinnamon| 183 cm| 70 cm| 58 – 84 cm| 93x71x18 cm| 15,4 kg| 270 kg| 1000 kg

*Dynamic resistance – measurement made with an evenly distributed dynamic load, simulating the tensions that occur during a typical classical massage.
**Static resistance – measurement made with an evenly distributed, fixed static load.

Meaning of pictographs

Other language versions available here:

www.habys.com/warrantymanuals

Fabricant
Shanghai Sintang Industrial Co., Ltd,
Linsheng Road No. 136, Tinglin Town,
Jinshan District, Shanghai, China
Made in China

Gemachtigd vertegenwoordiger in de Europese Gemeenschap
HABYS Sp. z o.o.
ul. Produkcyjna 16, 38-200 Jasło
tel.: +48 887 766 115, info@habys.pl
www.habys.pl

References

• Stoły do masażu, łóżka do masażu - Avenolife
• Stoły do masażu, stoły rehabilitacyjne, łóżka do masażu i rehabilitacji - Habys

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>