PrimeConnect Wireless Keyboard User Manual
- June 9, 2024
- PrimeConnect
Table of Contents
Prime Connect Wireless Keyboard
Wireless Keyboard
INCLUDES
1 (One)Win, less Keyboard: 4.88 in. x 11.26 In. x 0.71 in. (12.4 cm x 28.6cm x
1.8 cm), 1 (One) User Manual
SPECIFICATIONS
- Contact bounce: S10ms
- Operation voltage: 3V
- Insulation resistance: ~ 700M0(700V/DC)
- Operation current: 1mA
- Operoting force: 55±7g
- Total travel: .?: 10 million times
- Storage temperature: -20-+70°c
- Battery Requirement: 2 X AAA 1.5 Alkaline Batteries (not included)
CONNECTING THE WIRELESS KEYBOARDS
- Put 2 x AAA batteries into the battery compartment on the back (not included)
- Turn the back switch to “ON”
- Press the °CONNECT0 button on the bock, the front Bluetooth® indicator will blink blue
- Open the Bluetooth connection utility on the receiver device such as a computer or smartphone, search for “PrimeConnect” then pair with it – when paired successfully, the blue indicator will turn off. Then you can use the keyboard wirelessly.
NOTES
- While connected, the keyboard will enter standby mode without any operation, and after 3 minutes without operation, it will enter Deep Sleep Mode – Press any key to wake it up Immediately.
- While not connected, the keyboard will enter Deep Sleep Mode in 3 minutes -Press any key to wake it up.
- This equipment has been tested and found to comply with the limits for a Closs B digital device, pursuant to port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in o particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with port 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
- This is not a toy. Please keep away from small children.
- Please keep the unit away from water and heat.
- This unit is for indoor use only.
- Do not operate this unit with o damaged plug.
TECHNICAL SUPPORT
Please do not attempt to fix the product yourself. If you are experiencing any
problems with the product please do not return it to the store you bought it
from. You con contact our technical support representatives and they will
assist you with any questions you may have. For assistance operating your
product, please consult the User’s Manual or feel free to contact iWorld
technical support:
WARNING:
TO AVOID BATTERY LEAKAGE
- The batteries used with this product are small ports and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone the American Association of Poison Control Centers 1-800-222-1222).
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Do not mix old and new batteries, alkaline, standard (Carbon – Zinc), or rechargeable (Nickel-cadmium) batteries.
- Cleon the battery contacts and those of the device
- Always remove batteries if consumed or if the product is to be left unused for a long time.
2023 I World Global Wholesale, LLC
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc., and any use of such marks by iWorld is under license. All other
trademarks and trade names are those of their respective owners. Actua l
product may differ slightly from the image shown. MADE IN CHINA
iWorldLLC
240 W.37TH ST.NEW YORK, NY 10018
www.iworldnyc.com
email: [email protected]
Please keep the instructions for further reference.
PACKAGE WITH: PCEA-1075-PK, PCEA-1075-PR
DATE: 12/1/2023
DESIGNER: Danisse Nieto
[email protected]