VENERE Y9 3 in 1 Wireless Charging Station User Manual
- June 10, 2024
- VENERE
Table of Contents
VENERE Y9 3 in 1 Wireless Charging Station
Specification
| Product | 3 in 1Wireel ss Charging Station |
|---|---|
| Input | 9V::”:3A |
| Output | For Phone 15W(Max) |
For Wireless Earbuds 3W
For Apple Watch 2W
Charging distance| 0.24 inch ( 6 mm )
Work temperature| 32-100° F
Suitable equipment| iPhonee – iPhone 14 series
Android phone with wireless charging function
Airpods / Airpods Pro, Galaxy Buds
Apple Watch 2-8, Ultra
Package list| Wireless charger x 1, UM x 1, Charge cable x 1
OVERVIEW
Steps:
- Connect the wireless charging station to suitable PD or QC adaptor with charge cable.
- Place the phone on the stand vertically or horizontally, the phone will be in charging, same time the blue light will gradual change.If the blue light and green light blinking , please check whether your phone is placed correctly, or a credit card/ metal ring inside the phone case. The light can be turn off by the backside switch.
- Place Airpods on the Earbuds Charger, it will be in charging.
- Place the Apple Watch on Watch charger, it will be in charging.
“Notice: Place the phone on the middle of the support, make sure the thickness of the big phone case such as iPhone 14 Pro Max shouldn’t exceed 0.24 inch (6mm), otherwise will lead to low charge speed, even stop charging.
Warnings:
- Make sure your phone supports wireless charging.
- Please do not place metal /magnet /credit card on the cell phone or phone case, it will block the wireless charge.
- Do not use the cell phone case which is more than 0.24 inch thick, otherwise it will not be able to charge.
- Do not disassemble, bump, squeeze or put the product into the fire.
- Do not use the product under the condition of the high temperature,humiity or corrosion, so as to avoid electric leakage in the circuit.
- Do not splash water or other liquids on the wirless charger. If cleaning is required, make sure the power is disconnected.
- Keep the distance between the implanted medical device(pacemaker, co-chlear implant, etc) when charging, and the wireless charger at least 8 inch to avoid potential interference to the medical device.
- When using the DC charger for power supply, please make sure your charger adapter support DC charge, and its max power is more than 18W.
- Please keep the product out of the reach of kids.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause ham,ful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>