acer RL272 RL2 Series LCD Monitor User Guide

June 10, 2024
Acer

acer RL272 RL2 Series LCD Monitor

acer-RL272-RL2-Series-LCD-Monitor-PRODUCT

Important safety instructions

Please read the following instructions carefully.

  1. To clean the LCD monitor screen:
    • Turn off the LCD monitor and unplug the power cord.
    • Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
  2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
  3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
  4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
  5. Store the LCD monitor in a room with a temperature of -20°C to 60°C (-4°F to 140°F). Storing the LCD monitor outside this range may result in permanent damage.
  6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
    • Monitor-to-PC signal cable is frayed or damaged.
    • Liquid spills onto the LCD monitor or the monitor is exposed to rain.
    • The LCD monitor or case is damaged.

Attaching the monitor to the base

  1. Remove the monitor from the packaging.
  2. Attach the footstand to the base. (for selected models).
  3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
  4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

  1. Turn off your computer and unplug your computer’s power cord.
  2. Connect the signal cable to VGA (optional) and/or HDMI (optional) input socket of the monitor, and the VGA (optional) and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
  3. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable.
  4. Insert the monitor power cable into the power port at the back of the monitor.
  5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user manual for more instruction.

External controls

acer-RL272-RL2-Series-LCD-Monitor-FIG-3

acer-RL272-RL2-Series-LCD-Monitor-FIG-4

acer-RL272-RL2-Series-LCD-Monitor-FIG-5

FCC STATEMENT

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution

  • Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product.
  • In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

  1. this device may not cause harmful interference.
  2. this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users

CAN ICES-003(B)/NMB-003(B)

Restriction on Hazardous Substances statement (India)

This product complies with the “India E-waste Rule 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1  weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information ab ut where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Declaration of Conformity

We,

  • Acer Incorporated
  • 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan

Acer Italy s.r.l.

  • Viale delle Industrie 1/A, 20020 Arese (MI), Italy
  • Tel: +39-02-939-921
  • Fax: +39-02 9399-2913
  • www.acer.it
  1. Product: LCD Monitor
  2. Trade Name: Acer
  3. Model Number: RL272
  4. SKU Number: RL272 xxxxxx;
    • (“x” = 0~9, a ~ z, A ~ Z, or blank)

We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied:

EMC Directive: 2014/30/EU

  • EN 55032:2015 Class B
  • EN 55032:2015+A11:2020
  • EN IEC 61000-3-2:2019
  • EN 55035:2017+A11:2020
  • EN 61000-3-3:2013

LVD Directive: 2014/35/EU

  • EN 62368-1: 2014+A11:2017

RoHS Directive: 2011/65/EU

  • EN 50581:2012

ErP Directive: 2009/125/EC

  • Regulation (EU) 2019/2021;EN50564:2011;EN62087

Year to begin affixing CE marking: 2021.

RU Jan / Sr. Manager
Acer Incorporated (Taipei, Taiwan)

Date: Nov.30,2021

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

The following local Manufacturer /Importer is responsible for this declaration:

  • Product: LCD Monitor
  • Model Number: RL272
  • SKU Number: RL272 xxxxxx
    • (“x” = 0~9, a ~ z, A ~ Z, or blank)
  • Name of Responsible Party:  Acer America Corporation
  • Address of Responsible Party: 333 West San Carlos St. Suite 1500 San Jose, CA 95110  U. S. A.
  • Contact Person: Acer Representative
  • Phone No.: 254-298-4000
  • Fax No.: 254-298-4147

INFORMATION

For customers who own the EPEAT registered-products1, Acer offers the following services2:

  1. The availability of warranty options3 totaling at least 3 years
  2. For the product life extension4, through the use of compatible parts of after-market, or refurbished with equal or higher specification, we offer to upgrade, repair or replacement parts for up to 5 years after end of production.
  3. Product take-back program of Notebooks, Desktops and Monitors
  4. Battery take-back program of Battery Pack of Notebooks For more details of above services, please visit local Acer website

Message related to battery replacement

For customers who own the EPEAT registered products, your product may contain batteries that are replaceable once they reach the end of their useful life.

  • For products that ship with accessories such as remote controls, keyboards, mice, etc., containing alkaline batteries (AA, AAA, etc.), please refer to your product user guide for instructions on how to replace those batteries. Alkaline replacement batteries are available off-the-shelf at any retail store that carries standard alkaline batteries. Please dispose of spent batteries in accordance with your local waste disposal laws.
  • For main product rechargeable batteries, such as those powering notebook PCs, tablets, etc., please refer to your local Acer customer support website or contact your local representative for detailed information on battery replacement services.
  1. EPEAT registered-products, please visit http://www.epeat.net
  2. Service availability and costs vary by country; for details, please refer to local Acer website or contact local Acer representatives.
  3. Options may include the combination of standard and extended warranties.
  4. Service for product life extension is available by product and the period of time may vary by country, please refer to local Acer website or contact local Acer representatives for details.

Maintenance

  • Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum).
  • If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.

Caution: (Applicable models with battery)

  • Replacement of a battery with an incorrect type that can defeat a safeguard;
  • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
  • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
  • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  • Risk of fire or explosion if the battery is replaced by an incorrect type

Caution: (Applicable models with coin/button cell batteries)

  • Do not ingest battery, Chemical Burn Hazard
  • This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Keep new and used batteries away from children.
  • If the battery compartment does not close securely, stop using the product and keep it away from children.
  • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Stability Hazard

  • The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions.
  • A product set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
  • ALWAYS use cabinets or stands or installation methods recommended by the manufacturer of the product set.
  • ALWAYS use furniture that can safely support the product.
  • ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
  • ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
  • ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.
  • NEVER place a product in an unstable location.
  • NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.
  • NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.
  • NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed.
  • If the existing product is going to be retained and relocated, the same considerations as above should be applied.

Product Information for EU Energy Label

acer-RL272-RL2-Series-LCD-Monitor-FIG-9

Documents / Resources

| acer RL272 RL2 Series LCD Monitor [pdf] User Guide
RL2 series, RL272, RL272 LCD Monitor, RL2 Series LCD Monitor, RL272 RL2 Series LCD Monitor, LCD Monitor, Monitor
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals