HUDSON PRO 23001 12V Vehicle Power Outlet Inflator-Deflator Instruction Manual
- June 10, 2024
- HUDSON PRO
Table of Contents
- HUDSON PRO 23001 12V Vehicle Power Outlet Inflator-Deflator
- Product Information
- Product Usage Instructions
- PRODUCT SPECIFICATIONS
- OPERATION
- TIRE INFLATION
- BALL INFLATION
- RAFT/MATTRESS INFLATION
- AUTOMATIC SHUT-OFF INSTRUCTIONS
- MAINTENANCE
- LIMITED WARRANTY:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUDSON PRO 23001 12V Vehicle Power Outlet Inflator-Deflator
Product Information
The 12V Vehicle Power Outlet Inflator/Deflator is a portable air compressor that can be used to inflate or deflate tires, balls, rafts, and mattresses. It has a maximum pressure of 160 PSI/11 Bar/1100 kPa and is powered by a 12V cigar-lighter cord. The inflator/deflator comes with a low-pressure hose, a high-pressure tire inflator hose, and accessories. It also has an automatic shut-off feature to prevent over-inflation.
Product Usage Instructions
WARNING: To prevent serious injury from accidental operation, make sure
that the power switch is in the off position before performing any procedure.
DANGER: To prevent serious injury or death, do not operate the
inflator/deflator while the car engine is running in an enclosed area.
Tire Inflation
- Remove the high-pressure hose from its storage area.
- Plug the unit in with the preferred power source.
- Turn the unit on by turning the power switch on high (||).
- Attach the high-pressure tire inflator hose to the tire valve stem.
- Inflate the tire to the desired pressure.
- Once the desired pressure is reached, move the tire inflator lever up to unlock and remove.
- Turn the unit off by moving the switch to the center (O).
Ball Inflation
- Attach the low-pressure hose to the ball inflator accessory.
- Plug the unit in with the preferred power source.
- Turn the unit on by turning the power switch on high (||).
- Inflate the ball to the desired pressure.
- Once the desired pressure is reached, remove the low-pressure hose from the ball inflator accessory.
- Turn the unit off by moving the switch to the center (O).
Raft/Mattress Inflation
- Attach the low-pressure hose to the raft/mattress inflator accessory.
- Plug the unit in with the preferred power source.
- Turn the unit on by turning the power switch on high (||).
- Inflate the raft/mattress to the desired pressure.
- Once the desired pressure is reached, remove the low-pressure hose from the raft/mattress inflator accessory.
- Turn the unit off by moving the switch to the center (O).
Raft/Mattress Deflation
- Insert the low-volume hose into the air intake on the side of the unit.
- Connect the other end of the hose to the item being deflated.
- Plug the unit in with the preferred power source.
- Turn the unit on low (|) to start deflating.
- To stop deflating, return the power switch back to the center (O).
LED Light
- Plug the unit in with the preferred power source.
- Turn the light on by pressing the light switch to the (D) position.
- Turn the light off by pressing the switch to the (O) position.
Note: The inflator/deflator needs to cool for 30 minutes before storing away. For cleaning and maintenance instructions, refer to the product manual or contact customer service at 1-800-9-SPRAYER or email ladybug@hdhudson.com.
Customer service is here to help! If you have any questions or concerns, do
not return to the store. Call 1-800-9-SPRAYER or email
ladybug@hdhudson.com
WARNING : TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure
that the Power Switch is in the off position before performing any procedure.
DANGER : TO PREVENT SERIOUS INJURY OR DEATH: Do not operate
Inflator/Deflator while car engine is running in an enclosed area
PRODUCT SPECIFICATIONS
OPERATION
- CAUTION : TO PREVENT OVERHEATING WHILE INFLATING, keep the air intake and vents clear of obstructions. Always wear appropriate eye protection during use.
- WARNING : TO PREVENT SERIOUS INJURY FROM EXPLOSIONS: Before inflating, check item manufacturer’s recommended max air pressure. DO NOT exceed that pressure. Over inflation may result in an explosion.
- Note : The inflator/deflator has a sleep mode feature that powers off the unit after approximately 5 minutes of non-use. Press the power button to turn the unit back on.
- Notice : The inflator/deflator can become hot during use. Allow the unit to cool for ten minutes after each use. Inflator/deflator needs to cool 30 minutes before storing away.
TIRE INFLATION
- Remove the high-pressure hose from its storage area.
- Remove tire’s valve cap. Move tire inflator’s lever to the up position, insert tire adapter if needed, then move the lever down to lock in place.
- Plug unit into the vehicle power outlet.
- Turn unit on by turning the power switch on high (||)
- Once desired pressure is reached, simply move the tire inflator lever up to unlock and remove.
- Turn the unit off by moving the switch to the center (O)
Note : Please refer to your vehicle or bicycle manual for appropriate pressure.
BALL INFLATION
- Remove the high-pressure hose from its storage area
- Plug unit in with the preferred power source.
- Turn unit on by turning the power switch on high (||)
- Once desired pressure is reached, simply move the tire inflator lever up to unlock and remove it.
- Turn the unit off by moving the switch to the center (O)
RAFT/MATTRESS INFLATION
- Remove the high-pressure hose from its storage area.
- For smaller inflatables: Move tire inflator’s lever to the up position, insert raft/mattress adapter, then move the lever down to lock in place.
- For larger inflatables: Remove high-volume hose from storage, connect it to the back of the unit by aligning the slots in the hose to the pins and turn the hose counterclockwise to lock in place.
- Insert the other end of the hose into the inflatable.
- Plug unit into the vehicle power outlet.
- Turn unit on by turning the power switch on low (|).
- Once desired air input is reached, simply remove the hose from the inflatable.
- Turn the unit off by moving the switch to the center (O).
RAFT/MATTRESS DEFLATION
- Insert low volume hose into the air intake on the side of the unit. (see “Deflate Location” to the left).
- Connect the other end of the hose to the item being deflated.
- To start deflating, turn the unit on low (|).
- To stop deflating, return the power switch back to the center (O).
AUTOMATIC SHUT-OFF INSTRUCTIONS
- Plug the unit in with preferred power source.
- Select pressure setting by pressing the button labeled PSI, BAR, or kPa (Please refer to the manual of the product being inflated/deflated for appropriate pressure settings).
- To get to desired pressure, press the + or – button until proper pressure is displayed.
- Refer to the operation part of this manual for inflation.
- Once the proper pressure is reached, the unit will automatically shut off.
LED LIGHT
- Plug the unit in with preferred power source.
- Turn the light on by pressing the light switch to the (D ) position.
- Turn the light off by pressing the switch to the (O) position.
CLEANING AND STORAGE
- Wipe external surfaces of the inflator with a damp, clean cloth.
- Using a vacuum, clean debris from the air intake and external air vent.
- Let the unit sit for 30 minutes after use then store in a dry area out of reach of children and away from metal objects to prevent shorting.
MAINTENANCE
BEFORE EACH USE inspect the general condition of the inflator. Check for:
- Loose hardware.
- Misalignment or binding of moving parts.
- Cracked or broken parts.
- Any other condition that may affect its safe operation.
LIMITED WARRANTY:
H.D. Hudson Manufacturing Company warrants to the original purchaser only, that this product will continue to function as intended if used in accordance with operating instructions (under NORMAL CONSUMER USE) for two years. If the product fails to function as intended—DO NOT RETURN IT TO THE STORE – call our CONSUMER SERVICE HOTLINE AT 1-800-9-SPRAYER (toll free) for fast service. We will, at our option, repair or replace any non-functioning parts without charge (shipping and handling charges will apply). H.D. Hudson Manufacturing Company shall have the option of requiring the return of the nonfunctioning product to the address listed below together with proof of purchase to establish a claim under this warranty. This warranty does not apply to damage resulting from accident, misuse, neglect, alterations, operation not in accordance with instructions, commercial use, or normal wear.
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR CONSUMER USE, ARE LIMITED TO THE DURATION SPECIFIED ABOVE. H.D.
HUDSON MANUFACTURING COMPANY’S LIABILITY IS LIMITED SOLEY TO THE REPAIR OR
REPLACEMENT OF THE NON-FUNCTIONING PRODUCT OR PART. H.D. HUDSON MANUFACTURING
COMPANY EXCLUDES LIABILITY UNDER THIS WARRANTY FOR ANY AND ALL INCIDENTAL AND
CONSEQUENTIAL LOSS OR DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or
the exclusion or limitation of incidental or consequential damages, so these
limitations or exclusions may not apply to you. This warranty gives you
specific legal rights and you may have other rights which vary from state to
state.
IF YOU HAVE ANY QUESTIONS OR CONCERNS: PLEASE CALL OUR CONSUMER HOTLINE AT
1-800-9-SPRAYER (1-800-977-7293).
WARNING!!! THIS PRODUCT IS DESIGNED TO APPLY CHEMICALS THAT MAY BE HARMFUL AND
COULD CAUSE SERIOUS PERSONAL INJURY IF INHALED OR BROUGHT INTO CONTACT WITH
THE USER. FAILURE
TO READ AND FOLLOW OWNER’S MANUAL INSTRUCTIONS BEFORE USE AND/OR MISUSE OF
THIS PRODUCT COULD RESULT IN EXPLOSIVE FAILURE WITH MAJOR INJURIES.
1-800-9-SPRAYER
ladybug@hdhudson.com
©2019 Manufactured by H. D. Hudson Manufacturing Company
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>