MantelsDirect 59299 Modern Ember Mantel Shelf Instruction Manual
- June 10, 2024
- MantelsDirect
Table of Contents
59299 Modern Ember Mantel Shelf
Product Information
The mantel shelf is a wall-mounted shelf that can be placed above a fireplace or on any wall. It comes with a French cleat mounting board for easy installation and is designed to hold decorative items or other lightweight objects.
Product Usage Instructions
- Tools and materials needed for installation include: bubble level, tape measure, drill, pencil, and wall anchors.
- Start by determining the location and measuring the space where you want to install the shelf. With the shelf upside down on a soft surface, hold the mounting board in position on the mantel shelf. Measure from the bottom of the shelf to the bottom of the mounting board and make a note of this measurement.
- Place the shelf on the wall above your fireplace or on the wall at the desired height. Level the shelf and draw a line on the wall along the bottom of the shelf. Remove the shelf and measure up the distance between the bottom of the shelf and mounting board that you noted earlier. Mark the line at several points to ensure a level mount.
- Locate and mark the location of the center of 3 studs (2×4 boards) inside the wall you intend to mount your mantel shelf.
- Attach the French cleat hanger board to the wall using appropriate fasteners for your application. If you are mounting on standard drywall over stud construction, make sure you screw the mounting board into the wood studs for strength. When attaching the shelf to a brick surface, use a masonry lag bolt.
- Lift and place the shelf over the mounting board and slide down until the shelf is tight against the wall. Push the shelf tight against the wall and then push down firmly on the shelf to ensure the French cleat is properly connected.
- Note: The edge of the shelf against the wall may not be tight across the whole length of the shelf due to an uneven wall surface. Use caulk to fill the gap if needed.
- Enjoy your new mantel shelf and don’t forget to tag us on social media!
By following these simple steps, you can easily install your new mantel shelf and have a beautiful addition to your home decor.
Installation Instructions
Follow these 3 easy steps and you will be ready to enjoy your new shelf. You will need the following tools and materials to hang your mantel shelf:
Step 1: Determine location and measure.
With the shelf upside down on a soft surface, hold the mounting board in position on the mantel shelf. Measure from the bottom of the shelf to the bottom of the mounting board – make note of this measurement, as you will use it in one moment. Place the shelf on the wall above your fireplace or on the wall at the desired height. Level the shelf and draw a line on the wall along the bottom of the shelf. Remove the shelf and measure up the distance between the bottom of the shelf and mounting board that you noted earlier. Mark the line at several points to ensure a level mount. Locate and mark the location of the center of 3 studs (2×4 boards) inside the wall you intend to mount your mantel shelf.
Step 2: Attach the French Cleat hanger board to the wall.
Place the included French cleat mounting board on the wall and line up the
bottom of the French cleat mounting board with the upper line. Attach the
mounting board to the wall with appropriate fasteners for your application.
(See Drawing B) If you are mounting on a standard drywall over stud
construction, make sure you screw the mounting board into the wood studs for
strength. When attaching the shelf to a brick surface, you must use a masonry
lag bolt.
Step 3: Mounting the Mantel Shelf
Lift and place the shelf over the mounting board and slide down until the
shelf is tight against the wall. Push the shelf tight against the wall and
then push down firmly on the shelf to ensure the French cleat is properly
connected.
Note: The edge of the shelf against the wall may not be tight against the
wall across the whole length of the shelf. The wall may not be uniform and
flat. If not, use caulk to fill the gap
Drawing
Don’t forget to tag us! We would love to see your new mantel. #mantelsdirect