TANEBU Side Table with Storage Space Instruction Manual
- October 29, 2023
- TANEBU
Table of Contents
TANEBU Side Table with Storage Space
Product Information
- Product Name: Side Table with Storage Space
- Material: Bamboo, Steel Plate, Polyester Fiber
- Dimensions: Length 37.4 x Width 37.4 x Height 54cm
- Usage: Indoor Only
Product Usage Instructions
- Place the upper and lower shelves (D) between the left and right sides (C) and secure them with screws (F) using the supplied wrench (G).
- Ensure that the screws are half-tightened
- first. Then, once the shelves are properly straight, tighten all screws.
- Place the iron plate (A) on the upper intermediate shelf and the basket (B) on the lower intermediate shelf (D).
- Stick the floor protectors (E) under the legs.
- Avoid exposing the product to high-temperature scenarios, such as fire sources, to prevent excessive deformation and moisture loss from the bamboo.
- Clean the side table with a wet cloth and dry it with a dry cloth after cleaning.
Maintenance Method and Precautions
Avoid exposing the product to high-temperature scenarios such as fire sources. Over a long period, the bamboo may lose water, causing excessive deformation. To prevent this, keep the product away from heat sources. Solid bamboo contains some moisture, and it may shrink in low-temperature environments and expand in high-temperature environments. If exposed to extreme conditions for a long time, there may be cracking and deformation. Therefore, only use this side table inside. In order to clean the side table use a wet cloth. Always dry the table off with a dry cloth after doing this.
Parts
instructions
-
The upper and lower shelfs (D) are placed between the left and right sides (C) and are secured with screws (F) using the supplied wrench (G).
Note: Be sure to tighten the screws half way first. Only when the shelfs are properly straight, tighten all screws. -
Place he iron plate (A) on the upper intermediate shelf, and the basket (B) on the lower intermediate shelf (D). Stick the floor protectors (E) under the legs. The installation is complete.