Lafayette Instruments 01296 Abdominal Caliper User Manual
- June 9, 2024
- Lafayette Instruments
Table of Contents
Lafayette Instruments 01296 Abdominal Caliper
INTRODUCTION
The Lafayette Abdominal Caliper aids the measurement of sagittal abdominal diameter. Studies have shown that the measurement of sagittal abdominal diameter to be more useful than traditional waist circumference measurements. Sagittal abdominal diameter is highly correlated with the volume of visceral fat and a strong predictor of cardiovascular disease.
Measurement Range
Range: 65 – 500 mm
Usage
The subject is asked to lie down on an exam table or hospital bed in a supine
position. The base of the caliper is placed under the subject’s back and the
measurement arm is placed on top of the subject’s abdomen giving a direct
reading of the distance between the two points.
Note: The Caliper must be read from the top of the measurement arm where
the red line is drawn.
Leveling
The Abdominal Caliper has a built-in level. If you desire to use the level,
the bubble must be perpendicular to the measurement arm. The bulb can be
removed by carefully sliding upward. Turn the bulb and slide it back onto the
measurement bulb as shown at left.
Note: We recommend storing the bulb in a position flat against the
caliper.
Cleaning Instructions
Soap and water is recommended for cleaning this product. Cleaning should be done with moist, clean cloths and then wiped to dry. Do not submerge or soak the product with water. Isopropyl alcohol wipes may be used as an alternative. Do not use bleach on this product.
Disclaimer: The cleaning instructions for Lafayette Instrument products are a recommendation of compatible cleaning materials only. Product end users are responsible for instituting an appropriate cleaning regimen utilizing best practices and techniques. Lafayette Instrument assumes no responsibility for the cleanliness or sanitation of the products after initial use nor makes any claim that the use of the recommended cleaning materials mitigates all risk of potential cross infection.
Symbol Glossary
The following glossary describes the symbols included on the device label. Some symbols may not apply to this device.
Terms and Conditions
LIC Worldwide Headquarters
Toll-Free: 800-428-7545 (USA only)
Phone: 765-423-1505
Fax: 765-423-4111
Email:
sales@lafayetteinstrument.com
export@lafayetteinstrument.com
(Outside the USA)
Mailing Address:
Lafayette Instrument Company
PO Box 5729
Lafayette, IN 47903, USA
Lafayette Instrument Europe:
Phone: +44 1509 817700
Fax: +44 1509 817701
Email:
eusales@lafayetteinstrument.com
Phone, Fax, Email or Mail-in Orders
All orders need to be accompanied by a hard copy of your purchase order. All
orders must include the following information:
- Quantity
- Part Number
- Description
- Your purchase order number or method of pre-payment
- Your tax status (include tax-exempt numbers)
- Shipping address for this order
- Billing address for the invoice we’ll mail when this order is shipped
- Signature and typed name of person authorized to order these products
- Your telephone number
- Your email address
- Your FAX number
Domestic Terms
There is a $50 minimum order. Open accounts can be extended to most recognized
businesses. Net amount due 30 days from the date of shipment unless otherwise
specified by us. Enclose payment with the order; charge with VISA, MasterCard,
American Express, or pay COD. We must have a hard copy of your purchase order
by mail, E-mail or fax. Students, individuals and private companies may call
for a credit application.
International Payment Information
There is a $50 minimum order. Payment must be made in advance by: draft drawn
on a major US bank; wire transfers to our account; charge with VISA,
MasterCard, American Express, or confirmed irrevocable letter of credit.
Proforma invoices will be provided upon request.
Exports
If ordering instrumentation for use outside the USA, please specify the
country of ultimate destination, as well as the power requirements (110V/60Hz
or 220V/50Hz). Some model numbers for 220V/50Hz will have a “*C” suffix.
Quotations
Quotations are supplied upon request. Written quotations will include the
price of goods, cost of shipping and handling, if requested, and estimated
delivery time frame. Quotations are good for 30 days, unless otherwise noted.
Following that time, prices are subject to change and will be re-quoted at
your request.
Cancellations
Orders for custom products, custom assemblies or instruments built to customer
specifications will be subject to a cancellation penalty of 100%. Payment for
up to 100% of the invoice value of custom products may be required in advance.
Cancellation for a standard Lafayette Instrument manufactured product once the
product has been shipped will normally be assessed a charge of 25% of the
invoice value, plus shipping charges. Resell items, like custom products, will
be subject to a cancellation penalty of 100%.
Exchanges and Refunds
Please see the cancellation penalty as described above. No item may be
returned without prior authorization of Lafayette Instrument Company and a
completed Return Form. A copy of the Return Form or your assigned Return #
(you will receive this via email after submitting the form) must be included
with the returned goods. The merchandise should be packed well and fully
insured. Unopened merchandise may be returned prepaid within thirty (30) days
after receipt of the item and in the original shipping carton. Collect
shipments will not be accepted. Returned products must be in saleable
condition, and credit is subject to inspection of the merchandise.
Repairs
Instrumentation may not be returned without prior authorization by Lafayette
Instrument Company and a completed Return Form. When you complete the Form, or
call Lafayette Instrument, you will receive a Return #. Your Return # number
will be good for 30 days. Address the shipment to:
Lafayette Instrument Company 3700 Sagamore Parkway North Lafayette, IN 47904,
USA.
Shipments cannot be received at the LIC PO Box. Items should be packed well, insured for full value, and returned along with a copy of the Return Form or the Return #. An estimate of repair will be given prior to completion ONLY if requested in an enclosed cover letter. We must have a completed purchase order by mail or fax, or repair work cannot commence for non-warranty repairs.
Damaged Goods
Damaged instrumentation should not be returned to Lafayette Instrument prior
to a thorough inspection. If a shipment arrives damaged, note damage on
delivery bill and have the driver sign it to acknowledge the damage. Contact
the delivery service, and they will file an insurance claim. If damage is not
detected at the time of delivery, contact the carrier/shipper and request an
inspection within 10 days of the original delivery. Please call the Lafayette
Instrument Customer Service Department for repair or replacement of the
damaged merchandise.
Limited Warranty
Lafayette Instrument Company warrants equipment manufactured by the company to
be free of defects in material and workmanship for a period of one year from
the date of shipment, except as provided hereinafter. The original
manufacturer’s warranty will be honored by Lafayette Instrument for items not
manufactured by Lafayette Instrument Company, i.e. resell items. This assumes
normal usage under commonly accepted operating parameters and excludes
consumable products.
Warranty period for repairs or used instrumentation purchased from Lafayette
Instrument is 90 days. Lafayette Instrument Company agrees either to repair or
replace, at its sole option and free of part charges to the customer,
instrumentation which, under proper and normal conditions of use, proves to be
defective within the warranty period. Warranty for any parts of such repaired
or replaced instrumentation shall be covered under the same limited warranty
and shall have a warranty period of 90 days from the date of shipment or the
remainder of the original warranty period whichever is greater. This warranty
and remedy are given expressly and in lieu of all other warranties, expressed
or implied, of merchantability or fitness for a particular purpose and
constitutes the only warranty made by Lafayette Instrument Company.
Lafayette Instrument Company neither assumes nor authorizes any person to assume for it any other liability in connection with the sale, installation, service or use of its instrumentation. Lafayette Instrument Company shall have no liability whatsoever for special, consequential, or punitive damages of any kind from any cause arising out of the sale, installation, service or use of its instrumentation. All products manufactured by Lafayette Instrument Company are tested and inspected prior to shipment. Upon prompt notification by the Customer, Lafayette Instrument Company will correct any defect in warranted equipment of its manufacture either, at its option, by return of the item to the factory, or shipment of a repaired or replacement part. Lafayette Instrument Company will not be obliged, however, to replace or repair any piece of equipment, which has been abused, improperly installed, altered, damaged, or repaired by others. Defects in equipment do not include decomposition, wear, or damage by chemical action or corrosion, or damage incurred during shipment.
Limited Obligations Covered by this Warranty
- In the case of instruments not of Lafayette Instrument Company manufacture, the original manufacturer’s warranty applies.
- Shipping charges under warranty are covered only in one direction. The customer is responsible for shipping charges to the factory if return of the part is required.
- This warranty does not cover damage to components due to improper installation by the customer.
- Consumable and or expendable items, including but not limited to electrodes, lights, batteries, fuses, O-rings, gaskets, and tubing, are excluded from warranty.
- Failure by the customer to perform normal and reasonable maintenance on instruments will void warranty claims.
- If the original invoice for the instrument is issued to a company that is not the company of the end user, and not an authorized Lafayette Instrument Company distributor, then all requests for warranty must be processed through the company that sold the product to the end user, and not directly to Lafayette Instrument Company.
Export License
The U.S. Department of Commerce requires an export license for any polygraph system shipment with an ULTIMATE destination other than: Australia, Japan, New Zealand or any NATO Member Countries. It is against U.S. law to ship a Polygraph system to any other country without an export license. If the ultimate destination is not one of the above listed countries, contact us for the required license application forms.
3700 Sagamore Parkway North Lafayette, IN 47904 .
Phone: 765-423-1505
www.lafayetteinstrument.com
sales@lafayetteinstrument.com
3700 Sagamore Parkway North
Lafayette, IN 47904
Tel: 765-423-1505
sales@lafayetteinstrument.com
www.lafayetteinstrument.com