Xubialo ‎‎‎BL-TKG06 Star Projector Space Dog Galaxy Projector User Manual

‎‎BL-TKG06 Star Projector Space Dog Galaxy Projector
User Manual

Unboxing Check

Thank you for purchasing our products, please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list: Music Star Light x 1
Remote Controller x 1
USB Cable x 1
User Manual x1
Warnings: The power requirement of this product is USB DC 5V/2A. This product has been comprehensive and rigorous tested at the factory, the user should strictly follow the warning and instructions. Improper use resulting in product damage is not covered by the Company’s warranty.
Notice:

1. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
2. This product is suitable for indoor use, please do not use star shone directly in eyes and keep away from children.
3. The product is projected by LED and star combinations.

How to use:

1. Indoor use, projecting in the sky direction.
2. How to use the light projector, as shown below.
3. Connect Bluetooth “BL-TKG06” of the smart phone to play music.
4. Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor that is the “Remote Receiving Area” on the host.

Product Features:

1. Manual Mode: Press host buttons or remote control to switch the functions. In manual mode, the device default automatically standby after 4 hours.
2. Bluetooth Mode: You can connect your phone Bluetooth to play music, also use Smart Night Light App to control the device switch on/off, ocean wave or star light mode switch, single projecting the ocean wave light, star light, music playing or combinations, select different scene modes, custom the body clock functions.
3. Timer Mode: Use remote control or App to custom the standby time;
4. Voice Control: Press “Micro” button on the remote control or App interface to activate voice control function. The projection light will fast flash according to the external sounds or music rhythm.
5. White Noise Mode: Press host buttons, remote control or App to play the built-in white noise sounds.

Manual Mode
Host button function descriptions

1. Short press play previous song; Long press reduce volume
2. Short press play next song; Long press increase volume
3. Short press control the music play/pause
4. Bluetooth and white noise modes switching
5. DC Input: 5V/2A
6. Power ON/OFF mode switching

Remote control function description

Instruction:
When music starry projector connects power; LED blue light keeps on and in moving status; star light in breathing mode, it can default automatically standby after 4 hours.(timing without daily circle)

1. Power Switch: The default mode is ocean wave light moving and star light in breathing status (ocean wave light default moving in normal speed)
2. Star Light Switch: Control the star light switch on/off
3. Built-in White Noise: Ocean Wave — White Noise — Summer Night — Thunder
4. Built-in White Noise: Brook — Baby Lullaby 01 — Baby Lullaby 02 — Baby Lullaby 03
5. Press “R” , red light on; press again, red light off (at basic of light on at first time)
6. Press “G” , green light on; press again, green light off (at basic of light on at first time)
7. Press “B” , blue light on; press again, blue light off (at basic of light on at first time)
8. Press “W” , white light on; press again, white light off (at basic of light on at first time)
9. Pause
10. Volume Up
11. Volume Down
12. Previous Song
13. Next Song
14. Control the ocean wave light switch on/off
15. Voice Control Switch: Lights will fast flash following the external sound or music rhythm
16. Control the ocean wave light brightness adjustment
17. Control the ocean wave light moving speed up
18. Control the ocean wave light moving speed down
19. FADE 1: Ocean wave light move circularly in R-G-B-W single color mode
20. FADE 2: Ocean wave light move circularly in RB-RG-RW-BG-BW-GW double-color mode
21. Control the star light achieve either stay on or enter into breathing mode
22. Control Bluetooth and white noise mode switch
23. 1H Timer: Short press it, ocean wave light/star light flash once time as prompting for set 1H timer successfully
24. 2H Timer: Short press it, ocean wave light/star light flash 2 times as prompting for set 2H timer successfully
25. Timer Off: Short press it, ocean wave light/star light flash 3 times as prompting for set timer off successfully.
    Notice: This product comes with 4 hours automatic standby function that is work for 4 hours then left in standby mode.

Bluetooth Mode
A. Bluetooth Setting:

1. Please turn on your phone Bluetooth, or the product won’t be connected
2. Download “Smart Night Light” App by scanning the QR code directly

Smart Night Lighthttp://www.zoqin.com/APP/QRCODE/SmartNightLight.html

3. Search “Smart Night Light” App through Google Play(for Android) or APP Store (for Apple-i0S) and download it

B. Register and log in to the App

1. Turn on “Smart Night Light” App
2. Log in your account and password. Please register a new account on first use

C. Configuration Connect the music starry projector with power supply, enter the main interface(- fig.1), click “Add Device”or “+” button to enter “Product Selection” interface(fig.2). Choose the product and enter “Find the Device”interface(fig.3) (Please allow the app to access Bluetooth and previously turn on the Bluetooth.
Note: For Android, please also allow to access the location and turn on the location). Power on the device and keep close to the app to identify the device, see the pop-up shown(fig.4), then adding the found device.

APP Functions

1. Click on the “Music Star Light” icon to enter the main interface, touch the Power Switch ” ” to turn on/off the music star light. Custom the product name via the icon ” ” at the top right-hand corner, turn on the voice-activated mode via Micro “ ” button
   Click “Timer” icon “ ” to set a timer of the device auto turn on/off: Make the device automatically turn on/off in a custom time.
   (Note: The device cannot set the auto standby time exceed 4 hours)Click countdown icon to enter the countdown interface. Click “Start” to perform the countdown function and click “Over” to cancel it.

2. Four Main Interfaces as follows: 1). Ocean Wave Light Interface; ). Star Light Interface; 3). Music Play Interface; 4). Scenario Interface

2.1 Ocean Wave Light Interface:

1. Turn on/off ocean wave light;
2. turn on/off white light/colour light;
3. turn on/off ocean wave light breathing mode;
4. adjust the colour lights;
5. choose 6 mixed-colors ocean wave effects;
6. adjust white light brightness;
7. adjust colour light brightness;
8. adjust colour light saturation;
9. adjust the ocean wave moving speed

2.2 Star Light Interface Features as follows:

1. turn on/off star light;
2. turn on/off star light breathing mode;
3. adjust star light brightness

2.3 Music Play Interface Features as follows:

1. play/pause the music, switch the previous/the next song;
2. adjust the volume;
3. select the sound effects, the light will dance to the music, and you can adjust the rhythm sensitivity;
4. White Noise/Music Speaker Mode Switch;
5. White Noise Selection Pop-up;
6. Rhythm Sensitivity Adjustment

2.4 Scenario Interface
Features as follows: Custom scenario mode, choose the modes combination:

1. turn on/off the light;

2. colour light/white light combination, adjust brightness, 3 color changing modes:
   a. Static mode;
   b. Flash mode;
   c. Breathe mode. Custom the color changed speed in static, flash and breathe modes;

3. star light on/off, adjust starlight brightness, star light breathe mode on/off;

4. choose your custom scenario and save your rename, convenient to restart your favorite scenario effects next time

Preset Scenario Mode Selection: Click the preset scenario icon, select 48 kinds of scenario mode effects in the system

Troubleshooting for Network Configuration – Fail to Connect to Phone Bluetooth

1. Please check your phone Bluetooth access permission and turn on the Bluetooth(-For Android, please also allow to access the location and turn on the location).
2. Please check the music starry projector power on and keep close to the connection range(0-10m).
3. Please check your phone Bluetooth connect to the correct model “BL-TKG06”.
4. Please check your phone network works normally.

Specifications:

beads (520-525nm), blue light beads (460-465nm), white light beads (color temperature 1500-15000k), green light wavelength (532nm)
Projection Distance| 2-10M/6.56-32.80ft
Projection Area| The projection area is sod at a distance of 3M, and 150d at a distance of 5M
Speaker Parameter| 403W x2
Motor| Starting Voltage: 3V, with 1-4 r/min
Operating Temperature| -20~50°C/-4–122°F
Storage Temperature| -20~60°C/-4140°F
Product Model| BL-TKG06
Bluetooth Version| Bluetooth 5.0
FCC ID| 2AXGMBL-TKG06

§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>