msi Mag Quietude 100S Silent Case Kit User Guide
- June 9, 2024
- MSI
Table of Contents
msi Mag Quietude 100S Silent Case Kit
Accessories
Specification
| Fan LED Controller | 1 to 4 ARGB (3 pin) and 6 Fan (4 pin) Control Board |
|---|---|
| Pre-Installed Fan | Rear: 1x 120 mm fan (MEG SILENT GALE P12) |
| Case Dimensions | 475(D) x 231(W) x 490(H) mm /18.7(D) x 9.09(W) x |
19.29(H) inch
Motherboard Support| ATX/ M-ATX/ ITX
Up to 7 PCIe slots
Drive Bays| 2x 2.5″ SSD trays 2x 3.5” HDD trays
IO Panel| 1x LED switch button
1x USB 3.2 Gen2 Type C port 2x USB 3.2 Gen1 Type A ports 1x Mic in jack
1x Audio out jack
1x Fan speed button 1x Power button
Fan Support| Top: 120 mm x3 / 140 mm x2 Front: 120mm x 3 / 140mm x 3
Rear: 120 mm x 1
Radiator Support| Top: 120/ 140/ 240/ 280/ 360 mm Front: 120 / 140 / 240
/ 280 / 360 mm
Rear: 120 mm
Clearance| CPU Cooler Height: Max 175 mm / 6.89 inch Graphics Card Length: Max 380 mm / 14.96 inch Built-in adjustable graphics card bracket
PSU Length: Max 220 mm / 8.66 inch (without 3.5’’ HDD tray installed,
Material| Chassis: SPCC 0.6 mm
Left Panel: Tempered glass
Right Panel: Metal + Mute cotton Front: Metal + Mute cotton Top Cover : Mute cotton
Bottom: Mesh
Control Board Specification
Case Features
Side & Front View
IO Panel
- LED switch button
- USB 3.2 Gen 2 Type-C
- USB 3.2 Gen 1 Type-A
- Mic in
- Audio out
- Fan speed button
- Power button
INSTALLATION
3.5″ HDD Installation
2.5″ SSD, HDD Installation
Opening the Left & Right Side Cover
Motherboard Installation
Graphics Card Installation
PSU Installation
ARGB Fan Connection
LED Switch
LED switch & fan speed switch control description:
- Short press the LED switch once to switch the LED effect.
- Press and hold the LED switch for 4 seconds, when LED flashes white twice, you can switch between MSI motherboard Mystic Light synchronization mode and Hub control mode.
- Press and hold the LED switch for 6 seconds to turn off/on the LED.
- Short press the fan speed switch once to switch the fan speed.
Note One single ARGB connector supports up to 64 LEDs. A total of 256 LEDs are supported. Exceeding this limit will lead to overheating, abnormal color or no light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>