Shouyin Electronics S2 Bluetooth Headset for Motorcycle Helmet User Manual

Shouyin Electronics S2 Bluetooth Headset for Motorcycle Helmet

Introduction

Thanks for choosing our motorcycle outdoor product.As a Bluetooth intercom headset, the Product can be matched with the helmet and connected lo the mobile phooefor music stening, calling, FM and connection to external walkie talkie; biIBides, it can be corm a­cted to the similar products to keep close communication with partners and radio listening, to bring better experience and close rela­tlonshlp with partners dur1ng you r Journey.

Main Functions

1. lnterwm ditance up ro 800m, full duplextalkback
2. Simultaneous c::a1neciial to 2 devices, suppm!l oonneciion with the third  party Bluetooth headset
3. Built-inradiofun ciion
4. Rich language pranpts
5. Display battery level
6. Rich language pranpts
7. Usablewhilecharging
8. Suppa1 multi-language switching

Schematic Diagram of Installation

Schematic diagram of clamp installation

FUNCTION

Answer call

1. Answer call: When receiving a call, short press “multi-function” key to answer the call.
2. Auto answer: When receiving a call, it will realize auto call answering if there’s no operation within 10s.
3. Rajact call: Whan receiving a call, long press “multi-function” key for 2s to reject the call.
4. Switch headset to mobile phone: In communication status, long press “multi-function” key for 2s to switch to mobile phone.
5. Stop communication: In communication status, short press “mull-function” key to stop communication.
6. Voica assistant: In connection status, long press “multi-function” key for about 2s and release it(tha mobile phone should supporthavoica call to support this function; sea the guide of specification for details) to prompt “voice call
7. Last number redial: In connection status, double click “multi-function” key to prompt “Last number redial”.

Volume

1. Volume+: In FM mode and music status, rotate the knob for 1 grid clockwiseand the maximum volume will “beep”
2. Volume -: In FM mode and music status, rotate the knob for 1 grid anticlock-wise and the minimum volume will “beep”
3. Multi-language switching: In matching mode, double click FM and “intercom”key to switch the language.
4. Factory reset: In matching mode, long press “intercom” key and “multi-function”key for 5s to clear the matching information

FM function

1. Enable FM: In startup status, long press FM key for 2s tohearthe prompt “FM mode”
2. Disable FM: In startup status, long press FM key for 2s tohearthe prompt “Bluetooth mode”
3. Previous: In startup status, rotate the knob anticlockwisefor 2s and release it.
4. Naxt: In startup status, rotate Iha knob clockwise for 2sand release it.

Music

1. Play/pause music: In music play status.short press the “multi-function”key to play the music, repeat the operation to pause the play.
2. Next music: In music play status, rotate the knob clockwise for 2s and release it.
3. Previous music: In music play status, rotate the knot anticlockwise for2sand release it.

Connection of Two S2

Step 1: Make sure two S2 are shut down and place lhemwithin the visible range of 1 m.Step 2:Turn on two S2, double click “intercom” key of anyheadset to hear “enable intercom”, then short press the “multi-function” key to hear “launch intercom”. If intercom is connected successfully,it will prompt “intercom connec-ted”; if connection fails within 1min, it will prompt “conne- ction timeout”. (Note: It has “beep” prompt in every 15sduring the connection process).

Product Parameters

• Model: 52 Bluatooth version· 5. 1
• Running time: Above 22h FM: Supported (frequency range·
• Intercom distance: 87-108M)
• 800-1, OOOm Intercom person number: 2
• Bluetooth intercom mode: Connection ‘”!lode : Series connection
• Battery capacIty:3.7v800mAh Communication:
• Chargingtime:2-3hours CVC8.0 communication noise reduction

Function Priority

• Level 1: Intercom from telephone & adapter Level
• Intercom from control wire of walkie talkie level
•  Bluetooth intercom level
• FM & music

Specification

• Bluetooth version 5.1
• Work distance 800m
• Standby period 400h
• Work period 22h
• Charging period
• About 2. 5h
• Charging interface TYPE-C Android general plug
• Battery type Rechargeable Li-polymer battery
• Power Supply 5V=1A
• Work temperature 14F-131F (-10°C-55°C)_
• Storage temperature -4F-140F -20°C-60°C

The actual period varies along with the type and use status of mobile phone. The work distance varies along with the environment and climate factors.

Precautions

1. Appropriate storage temperature: -2o•c to 60’C. Do NOT use the Product at ultrahigh or ultra low temperature; otherwise, its service life will be shortened;
2. Do NOT expose the product lo open fire to avoid explosion;
3. If the Product is to be long idled, store it in dry place and charge it regularly (trimonthly) to ensure normal operation.

 Indication and Prompt of Bluetooth Status

1. Startup status (it will prompt “Bluetooth connected” when Bluetooth is connected and the blue indicator will flicker once in every 12s; when Bluetooth is disconnected, it will prompt “Bluetooth disconnected” and the blue indicator will flicker twice in every 12s).
2. Low battery alarm (in startup status, it will prompt “low battery, please charge” once in every 60s and the indicator will be flickering in red).
3. Charging status (the red indicator will be on in charging period; once charging is done, the red indicator will become off and blue indicator will be on. The indicator will be off after 10s).
4. After startup, it has voice prompt from power volume 100% to power volume 10%, please charging.

FCC Requirement

changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>