amseco SSX-52 Durable Siren Instructions
- June 9, 2024
- amseco
Table of Contents
UTDOOR/INDOOR
DURABLE SIREN
INSTRUCTION
SSX-52
SSX-52S
INST. SHT. No. SSX52-H1010 S100510
GENERAL DESCRIPTION
SSX-52 is a durable self-contained outdoor and indoor siren that eliminates
the need for an additional siren box and tamper switch mounting which is
generally used on a co nventional installation . The SSX-52 durable siren
consist of a strong and rust free polycarbonate plastic cover housing, 120dB @
1 foot output siren driver and a N/C plunger type tamper switch for
supervison.
The durable siren DOES NOT require additional modules, metal boxes, tamper
switches, or special tools to install and operate.
The SSX-52 comes completely assembled and ready for installation .
Also available the SSX-52S Siren / Colored strobe Combination.
(Amber, Blue , Clear or Red lens to choose from.)
INSTALLATION
- Remove the Plastic cover housing by loosening the screws.
- Mount the aluminum bottom plate direct to the wall or mount BBK-1 outdoor box .
-
When wiring from the side, use the knock-out holes provided on the top and bottom of the plastic cover housing.
-
Plastic cover housing can be hooked-up as per drawing.
-
Wiring should be made as per drawing, and AWG #12 to #20 should be used.
Siren Strobe combination model installation should be same method of the above.
-
-
Salf-rising clamps used for the terminal screws do not require spade terminal.
“Wiring method of the SSX-52S Connect the Red lead wire from the strobe light
to the (+) tab on the inner cover , the Black lead goes to (—) terminal as per
drawing.
- After completion of wiring, mount the plastic cover back and secure with screws.
The tamper switch must be pushed by the cover housing.
External dimensions : inch (mm)
SPECIFICATION
| SSX-52| SSX-52S
---|---|---
Rated voltage| 12VDC
Rated current| 560mA at 12VDC (typical)| 670mA at 12VDC (typical)
Sound output| 120dB @ 1 foot
Operating voltage| 6-14.4VDC| 9.6-14.4VDC
Flashing rate| | 20-100 flashes/min.
Tamper switch contact capacity| 0.3A , 12VDC
Operating temperature range| —4°F— +149°F / —20°C — +65°C
Lens color| —| Amber, Blue, Clear, Red
NOTE
- Siren sound quality varies with the power supply.
If the power source has a high rippled, siren driver does not creates the best sound. Best siren sound should be made with a lower rippled power supply. - Please do not touch electronic components when you install the siren, it may cause damage.
Potter Electric Signal Company, LLC
1609 Park 370 Place , Hazelwood, MO 63042
Phone:800-325-3936/Canada
888-882-1833
www.pottersignal.com
firealarmresources.com
Documents / Resources
|
amseco SSX-52 Durable
Siren
[pdf] Instructions
SSX-52 Durable Siren, SSX-52, Durable Siren, Siren
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>