ifi iSilencer 3.0 USB Noise Filter User Manual
- June 9, 2024
- ifi
Table of Contents
ifi silencer 3.0 USB Noise Filter
OVERVIEW
-
RJ45 Ethernet male connector
Plug into the RJ45 network output port of the router. -
Network Status LED
Synchronized with the I router’s network status light. -
RJ45 Ethernet female port
Connect a wired network cable with an RJ45 connector.
Features
- Advanced filtration prevents noise from interfering with the digital signal
- Transient Voltage Suppressor (TVS) protects against surges and voltage transients
- Supports Gigabit Ethernet with no speed restrictions
- The network transformer delivers complete electrical isolation
- Shielded case with integral ground wire blocks external interference, minimizes packet loss and ensures stable signal transmission
- Uses standard RJ45 Ethernet cable connections
- Connect between your broadband router and network audio streamer
Specifications
- Input: RJ45 Socket
- Output: RJ45 Plug
- Speed Supported Devices: 1000/100/10 Mbps General purpose, notebook, switch, router, wireless device, etc
- Dimensions: 73.5 x 19 x 16 mm (2.9″ x 0.7″ x 0.6″)
- Net weight : 17 g (0.6 oz)
- Limited Warranty: 12 months
- 12 months typical or as permitted/required by local reseller laws.
- Specifications are subject to change without notice.
- ifi-audio.com
Documents / Resources
| ifi
iSilencer 3.0 USB Noise
Filter
[pdf] User Manual
iSilencer 3.0 USB Noise Filter, iSilencer, 3.0 USB Noise Filter, Noise Filter
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>