Pinneng H2R Helmet Speaker User Manual

H2R HELMET SPEAKER

** User  Manual**

Assembly steps

1. Select a suitable place to place the speaker, remove the sticker on the speaker bracket, and thenThe bracket is pasted on the helmet and pressed tightly.
2. Put the speaker into the bracket, press the speaker and turn it clockwise to hear A slight “click” indicates that the speaker has been connected to the bracket.

Note: In order to avoid the invasion of rain and dust, please turn the charging port downward.

BT Pairing steps

1. Press and hold the multifunction button for 2 seconds, the blue light flashes 3 times, and the speaker starts;
2. When pairing, control the distance between the speaker and the mobile phone within 1m;
3. Find “H2R” on the BT search interface of the mobile phone, and select it to complete Bluetooth pairing;
4. Green flashes twice every 5 seconds after pairing.

Note:
When the distance between the speaker and the mobile phone exceeds the eff ective distance (10 meters or 33 feet), the green light will always be on, and the speaker will be disconnected. It will enter the range within 5 minutes, automatically connect and play. The speaker will shut down automatically after 5 minutes without connection.

Charging mode

Connect the speaker and USB with a standard USB TypeC charging cable (one is included with the package)
Connect the charger to charge. It can be fully charged in about 2 hours.
The red light is always on when charging, and the blue light is always on after fully charging.

Note:

1. As the battery may lose power during storage, it is recommended to charge the headset before the first use.
2. Please use the speaker carefully during charging.
3. If it is not used for a long time, it is recommended to charge it in turn every month to maintain the battery life.
4. The red light flashes once every 2 seconds: the battery is low, please

Packaging accessories

Play function

1. Press and hold the multifunction key for 2 seconds to start the machine (press and hold to turn it off after starting the machine);

2. When playing music, click the multifunction key to pause, and then click to play music again;

3. When a call comes in, click the multifunction key to answer the call. During a call, click the multifunction key to interrupt the call, and double-click the multifunction key to end the call; When there is a call, long press the multifunction key for 2 seconds to reject the call; When connected, double click the multifunction key to replay the last call.

4. When playing, turn the keyboard to the right (clockwise) once to release it and play the next song; Rotate it to the right (clockwise) and do not loosen it to increase the volume;

5. When playing, turn the keyboard to the left (counterclockwise) to release it and play the previous song; Turn it to the left (counterclockwise) and do not release it to reduce the volume.

Parameter

Speaker type: bone conduction technology speaker
Standby time: up to 10 days
Playback time: up to 5 hours (80% volume)
BT version: 5.2 Eff ective distance: 10m
Battery capacity: 400mA Charging time: ≤ 2 hours  *For different types of BT devices, different operating systems or music players, the above functions may be diff erent.

Fault diagnosis and solutions

battery
Cannot connect| Speaker enters standby mode| Double click the multifunction key
Unable to pair| Did not enter pairing mode| Long press the multifunction key for
2 seconds

Storage and maintenance

1. Please store the speaker in a cool, dry place. Operating temperature:
– 10-45 ℃ (14-113 ℉). Working in a cold/hot environment or a highly humid place will reduce the battery life.
2. Please charge the speaker before using it after it has been left unused for a long time.
3. Please do not put the speaker into water. After using the speaker in rainy days, please use a clean soft cloth to clean it.
4. Do not use any sharp objects to release the speaker.
5. Do not place the headset at extremely high or low temperatures.
6. Do not charge the speaker in a damp environment.

Warranty

Product brand:………………………..
Product model: H2R
User Name:……………………………..
Date of purchase:………………………
contact number:………………………
Contact address:………………………..
mail box:………………………………….
Purchase channel:……………………..

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.’ Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment«.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications..’ However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hamaful interference to radio or television recepticeit. which can be detemiined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver..
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radioTV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restrictiont.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>