ALORAIR MaxFireDry 200 Heater Electric Heat Drying System Installation Guide
- June 9, 2024
- Alorair
Table of Contents
ALORAIR MaxFireDry 200 Heater Electric Heat Drying System
DESCRIPTION
Alorair MaxFire Dry 200 heater is a high-power heater, suitable for drying in flood restoration, such as “drying the subfloor”. Alorair MaxFire Dry 200 heater is equipped with overheat protection. When the temperature is too high, the machine will stop working, effectively preventing dangerous accidents. Using Shell fire- retardant material, even if the temperature is too high, it will not burn and cause a fire. High energy efficiency and low noise is our Alorair MaxFire Dry 200 heater.
APPLICATION
The powerful, portable and safe electric heater brings you a different experience. The ALORAIR MaxFire Dry 200 portable electric heat drying system with 12.5″ x 12.5″ x 26″ durable stainless steel housing, features 4 power receptacles for connection to common 120VAC outlets. The ALORAIR MaxFireDry 200 can output up to 20,000 BTUs of clean, safe heat at 250 CFM. Double- walled, Screened Enclosure for Heating Elements, the operation is safer. Simplified user controls include a large LCD display and Remote Thermostat. Remote thermostat control helps you control the indoor temperature more easily and conveniently. Sturdy handles and compact housing allow for units to be stacked together for both storage and easy transportation. In the drying room, the internal temperature safety switch ensures the safety of the machine during operation. It is the best choice for work sites that require heating. The drying process is very fast and you can trust it completely.
FEATURES
- CETL Certified
- Compact Size, Lightweight, Low noise
- High energy efficiency
- Efficient heat dissipation
- Start-Up Delay: A start-up delay prevents sparking or arching inside the heater.
- Enclosed Elements: The heating elements are protected inside a stainless steel cabinet with double-walled insulation and screen.
- Simplified user controls include a large LCDdisplay, keep track of jobsite.
- Stackable and Transportable: Stack up to 6 units high by aligning the rubber corners for stability, safely transport.
- ON/OFF Rocker: Use the ON/OFF rocker switch to operate power to the heater.
- Filter Replacement: Easily replace the MERV-8 filter by moving the tabs on the front.
Specifications
- Power: 120VAC 60Hz, 1 Phase Heater Circuits (up to 4)
- At Maximum Heat: 20,000 BTUs
- Airflow: 250 CFM
- Shell: Stainless steel
- Wire Length: 24.6′ Iong wire (4 PCS)
- Heating Wire: PTC heating wires (4)
- Optional 8″ Flex Duct Outlet
- Optional 8″ Flex Duct inlet kit
- Dim: 12.6 x 12.6 x 26.2 in
- Shipping Dim: 17x 17.8 x 30.5 in
- Weight: 34.6 Ibs
- Filter: MERV-8 Filter
- Loading Quantity: 20″: 156 Sets; 40″: 370 Sets; 40″HQ: 412 Sets
PTC
PTC heating has the characteristics of high voltage resistance, low residual
current, low power consumption, complete flame retardancy, fast response time,
long service life and so on. It uses PTC components as the heat source, the
corrugated sheet made of aluminum alloy as a radiator, also uses the unique
sandblasting cleaning process and high temperature, bonding, welding, molding
of the Jiseok factory. Long service life (can be used continuously for more
than 10 years), energy saving, no open flame (no redness at work), no oxygen
consumption, high safety performance, easy adjustment of heat, and less
affected by power supply voltage fluctuations. All reasons above make it
surpasses any traditional heater.
What Makes Us Great?
HELP
- AlorAir Solutions, Iinc
- Add: 14752 Yorba Ct Chino CA 91710 US
- Web: www.alorair.com
- E-mail: sales@alorair.com
- Tel:888-990-7469
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>