REMINGTON SOLAR WF2022 SolaCom Wifi Controller User Manual

REMINGTON SOLAR WF2022 SolaCom Wifi Controller

SolaCom Wifi Controller Manual

Brief Introduction
SolaCom Wifi Controller（WFCTR-22） is a type of smart gateway , connect Lan to the internet. It is integrated with Lan and RF (Radio Frequency ) function ,import MCU chip are used as main controller , internal integrated with TCP /IP protocol stack and the communication protocal of background server. RF part support OOK & ASK modulation , RF module have the advantages of high level of integration , good confidentiality , long distance reception etc. Distribution network is not needed , the gateway could be connected to the router and internet stably by reticle connection , then check the data and control the device through mobile phone side software .

• It provide abundant choice for serial port speed , adopt the FEC ( Forward Error correcting code ) , could certainly recover disturbed data, and provide more channel selection , multiple low power consumption for operation pattern and quick wake-up mechanism.
• WFCTR-22 adopt the mostly used Micro USB DC 5v to supply power , normal operation current 160mA , when send and collect date , peak current will not excess 500mA.

Product features

• Strong anti-jamming ablity , more suitable for complicated disturbing environment .
• Receiving sensitivity :-120dBm 500bps 434MHz
• Emission work current : 70mA +20dbm 43MHz
• Receiving work current : 8.8mA 434MHz
• Deep sleeping current : ≤1.65uA
• When the device is disconnected with the internet , data could be stored in the internal memory ,and resend to the server when network back up to avoid data loss.
• Set multi-channel , GFSK modulation .
• Max transmit power : +20dbm , min transmit power : -10dbm
• Definable low power consumption operation mode.
• 700mm transmission distance (300bps)
• Support large data transfer .

Application range

• Automatic metr reading system
• Furniture security & building automation
• Wireless sensor node & industrial monitoring
• Wireless alarming & security system
• Environmental monitoring
• The internet of things

Characters

• high stability
• high level of intergration ◼
• supporting mobile phone APP remote connection
• built-in watchdog ◼
• 5v power supply

Equipment RF electric parameter

Image

Rejection

| IMR| | | 33| | dB
Work temperature| Top| | -40| | +85| C

Product instruction

• WFCTR-22 have two internet indicator , and a RF indicator light
  • The left light will turn red when internet is not connected , will turn blue if the internet connected .
  • When the left light turn to red and quick flashed , the equipment will receive the RF signal and start the resolutions
  • The device have a Lan port ,plug the reticle , equipment will be connected to the internet.,
• WFCTR-22 have a their own APP software (solaCom) , the gateway and device are easily be added , have certain features , for example easy and simple network connection , and quick adding  way .

To set up the network.

Contact support@remingtonsolar.com with any questions.
If you need video instructions, go to https://youtu.be/Ou6aYfCsfLw and watch the video. It’s the same Wi-Fi installation, but for another one of our products.

Lable

Trade Name: SolaCom Wifi Controller Model
number: WFCTR-22
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>