U-BOAT Capsoil Chrono Titanio User Manual

: June 9, 2024
: U-BOAT

Table of Contents

U-BOAT Capsoil Chrono Titanio
WATCH FUNCTIONS
USER INSTRUCTIONS
CHRONOGRAPH FUNCTIONS
SPID TIME FUNCTION
ADJUSTING CHRONOGRAPH HANDS TO CORRECT POSITION
BATTERY REPLACEMENT AND OIL ADJUSTMENT
CARE AND MAINTENANCE
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

U-BOAT Capsoil Chrono Titanio

U-BOAT-Capsoil-Chrono-Titanio-product

WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH. IN THIS BOOKLET YOU WILL FIND THE USER INSTRUCTIONS. WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL WEB SITE IN THE U-CLUB AREA, DEDICATED EXCLUSIVELY TO THE U-BOAT WATCH OWNERS, TO GET ACCESS TO FURTHER BENEFITS AND PREVIEWS ON OUR LATEST NEWS, EVENTS, AND OFFERS.

WATCH FUNCTIONS

A CHRONOGRAPH START/STOP PUSHER
B CHRONOGRAPH RESET PUSHER
C SCREW CROWN
D HOUR HAND
E MINUTE HAND
F CHRONOGRAPH SECONDS COUNTER
G SECONDS HAND
H CHRONOGRAPH MINUTE COUNTER
I CHRONOGRAPH THE HOUR COUNTER

USER INSTRUCTIONS

POSITION 1

NEUTRAL POSITION
Operating position of the watch.

POSITION 3

SECOND CLICK
Unscrew crown C and pull it out to take it to position 3. Rotate the crown C to set the desired time.

Push in and screw the crown C back to position 1.

Note:
It is recommended to unscrew the crown C to position 3 when the watch will not be used for a long time, to limit battery consumption. $U-BOAT-Capsoil-Chrono- Titanio-fig- $2$$

POSITION 1
NEUTRAL POSITION
POSITION 3
SECOND CLICK

CHRONOGRAPH FUNCTIONS

Press the (on/off) pusher A to start the chronograph hand and the hours/minutes totalizer.
Press pusher A again to stop the chronograph, which will restart by pressing it again.
After measuring the times, with the chronograph stopped, press the pusher B to reset the chronograph and totalizer hands to zero.

SPID TIME FUNCTION

Press pusher A to start the chronograph.
Press the pusher B to stop the chronograph allowing an intermediate time to be read while timing continues. By pressing the pusher B again, the chronograph hands “recover” the elapsed time.
1. Start
Time reading
Restart
Time reading
Restart
Stop

ADJUSTING CHRONOGRAPH HANDS TO CORRECT POSITION

Unscrew the crown C and pull it out to position 3.
Press the pushers A and B simultaneously for about 2 seconds.
- The counterhand F will rotate 360°.
- By pressing the pusher A, the counterhand F will return to the correct position.
- Press the pusher B to activate counterhand I correction.
- Press the pusher A to reposition counterhand I in the correct position.
- By pressing the pusher B again we activate the correction of the counterhand H.
- Press the pusher A to reposition the counterhand H in the correct position.
Screw the crown C back into position 1.

BATTERY REPLACEMENT AND OIL ADJUSTMENT

Innovative closure system with a compartment for quick battery change L.
Closing system and internal oil regulation, for the exclusive use of U-BOAT, specialized technicians M.

Note:
The oily fluid inside the case may be subject to slight changes in shade due to the natural change of the liquid.

CARE AND MAINTENANCE

Your watch will keep its performance intact for a long time, with proper care.
We recommend that you have your watch checked every 3-4 years at one of our Authorized Dealers/Authorised Service Centres, to carry out ordinary maintenance on all mechanical parts and water resistance.
We also recommend contacting an Authorized Dealer/Authorised Service Center to replace the strap.
Do not leave the watch in places exposed to extreme temperature changes, humidity, the sun, and strong magnetic fields.
Make sure the watch is suitable for use in water.
Always rinse the watch with fresh water after contact with salt water.
It is advisable to unscrew the crown when the watch will not be used for a long time, to limit battery consumption. We recommend that you contact an authorized center to replace the battery.
OPTIMAL OPERATING CONDITIONS: 0°/+60°C.