ROWENTA RR90 X-plorer Serie 130 AI User Guide
- June 9, 2024
- Rowenta
Table of Contents
ROWENTA RR90 X-plorer Serie 130 AI
Start the Rowenta experience by discovering our tutorial video «Installing
your robot
For more information : rowenta.com
Your robot may encounter some difficulties on carpets: with fringes, too
thick, with long piles, too light (ex: bathroom carpet)
WHAT IN BOX
- Dustbox
- Control button
- Front bumper
- Recharge button
- Battery level indicator light
- Start / Pause button
- Warning indicator light
- WIFI indicator light
- Dust box
- ON OFF button
- Dust box cover
- Pre-filter
- Pleatted filter
MOUNTING
- Return the docking station to have access to the power jack, below the base. Plug the cable and hide the excessive cord below the base, in the space provided for that purpose. Only use the charger provided with the robot: do not use universal chargers.
- To place the docking station, make sure there is an empty area of 0.5m on the side and 1m in front of the docking station. Do not install the docking station near stairs. The cable must be tight. Always place the docking station on hard floor. Do not place the docking station on carpet.
- Connect the power cord plug to the main socket.
- The ON/OFF button is located under the dustbox. To have access to this button, remove the dustbox by lifting the handle which is on the robot. Turn the power switch ON (I). You will see LED lights blinking on the robot’s dashboard for approximately 50s.
- Clip the two side brushes to the special spindles. Place the robot on the docking station: the charging plates on the robot must touch those on the docking station.The battery symbols will then blink
POWER
- ON (I): the robot is charging (3h for the battery to be full charged).
- OFF(O) : the robot can not charge
In order to extend the battery lifespan, always keep the robot charging on the
docking station while not using it.
When not using the vacuum cleaner for a long time, please fully charge the
battery then remove it and store it in a cool dry place.
INSTRUCTION
- The robot has drop sensors to detect stairs and gaps. The robot will change direction when detecting them.
- In order to correctly detect the floor level difference, make sure there are no objects (bags, shoes …) on the floor next to gaps, stairs or on the stairs’ steps.
- The robot near stairs without objects .
- The robot near stairs with shoes, bags or other objects (the robot will not properly detect the stairs and therefore fall).
- Press the button to start cleaning or use Rowenta Robots application.
- Press the button again to pause cleaning. Press it again to resume the cleaning
- Press the button to end the cleaning. If the robot starts the cleaning from the docking station, it will return to the docking station.
- If the cleaning cycle is finished, the robot will automatically go back to the docking station in order to recharge its battery.
- If the battery is empty although there is still some area uncleaned, the robot will go back to the docking station to recharge.
- As soon as the battery is recharged completely, the robot will automatically resume its cleaning cycle where it stopped
- To fully benefit all the possibilities of your robot, download the free app “Rowenta Robots” (you can use the QR code above to find it on AppStore or Google play) on your smartphone. Just follow the instructions in the application to enjoy the robot!
WIFI CONNECTION
- When the is flashing slowly, the device is waiting for connection.
- When the is flashing rapidly, the device is connecting WIFI.
- When the is normally set on, the device is connected
CLEANING AND MENTAINANCE
To clean the charging contact switch off the robot and turn it upside down.
Then use a dry cloth to wipe them. Do not scrub with oil. Clean the charging
contact once a week.
- To empty the dust box, lift the dust box handle and take out the dust box. Open the dust box cover from the top to empty it. Pull out the filter frame to remove the pleated filter
- Clean the filters with the cleaning tool.
- Tap the pleated filter gently over a garbage bin to shake off the dust. Do not clean it with water.
- Rinse the pre-filter with water. Let it out to dry 12h. When the items are cleaned, place them back into the dustbox: combine the 2 filters together, insert the right side of the filter in the space provided for that purpose and then push on the filter to insert it properly in the dustbox cover.
- Place back the dustbox into the robot
CLEANING
- Remove the dustbox to have access to the ON/OFF button and turn the power switch OFF (0). Unlock the brush guard using the 2 lockers.
- Remove the brush guard, and pull out the brush.
- Clean the brush with the cleaning tool: use the blade side (to cut the hair) and the brush side (to remove them) doing movements from the top to bottom. You can take off the tips of central brush by pulling them in order to remove hairs that could be stuck in this part
- Put the brush and the brush guard back. Make sure that the rectangle part at the tip of the brush is in place. Lock the brush guard with the 2 lockers.
- To clean side brush, remove it by unclipping it and use a cleaning brush to clean the side brush and the entanglements in the slot of the side brush. Clean side brushes once a month
- Replace lateral brushes every 6 months. Throw away the old brushes and replace them with new ones. Clip the new brushes on the robot.
- To clean the wheels, clean the front, left and right wheels once a month. The wheel shaft may be entangled by hair, cloth strips, etc. so please clean it in time
- It is recommended that every week, a dry cotton cloth should be used to carefully wipe its laser window and sensor to prevent dust accumulation, which will affect the performance of the product
Cleaning the component
Optimal performance
Every 6 months replace the fine dust filter with new one to maintain optimal performance.
Recycle
- Do not throw the robot in the bin.
- Always wear gloves and protection.
- Attention : Before removing the battery turn off the robot and turn the robot upside down to get access to the battery slot. Remove the battery slot cover and disconnect the battery connector. Recycle the battery and robot.
Description of the error
Robot stuck
If the robot is stuck, the robot will stop itself. The warning light will
blink and the dedicated message will be displayed on the app.
In this case, 2 options :
- User moves the robot and places it on the docking station. The robot will start again as soon as a new cleaning run is launched (from the robot or app).
- User moves the robot and puts it back on the floor within 1m + presses the start/pause button to resume the cleaning session. The robot will try to relocalize in its environment and will continue the cleaning session.
Battery low
- If the battery reaches less than 10% the robot will enter in a battery low mode. In this mode, the battery light indicator is blinking rapidly.
- In that case the user must put back the robot on to the docking station to recharge. The robot will start again as soon as a new cleaning run is launched (from the robot or app).
Brush stuck
If the brush of the robot is stuck (carpet fringe, shoelace…), the robot stops
itself. The warning light will blink and the dedicated message will be
displayed on the app.
In this case, 2 options:
- User clears the brush and places the robot on the right docking station. The robot will start again as soon as a new cleaning run is launched (from the robot or app)
- User clears the brush and puts the robot back on the floor within 1m + presses the start/pause button to resume the cleaning session. The robot will try to relocalize in its environment and will continue the cleaning session.
The error table in languages NL, PT, RO, BG, CS, SK, UK, EL, HR, HU, SI, SR and BS is included in the safety instructions
References
- Rowenta | Pegle, usisivači i fenovi za kosu
- Rowenta | Ютии, Прахосмукачки и Сешоари
- Rowenta | Pegle, Usisivači i Fenovi Za Kosu
- Rowenta USA | Garment Steamers, Steam Irons & Humidifiers
- Rowenta Česká republika | Žehličky, vysavače a fény
- Rowenta | Staubsaugen, Bügeln, Lüften und Beauty
- Rowenta | Eléctroménager: aspiration, repassage, ventilation et beauté
- Rowenta Greece
- Rowenta | Glačala, usisivači i sušila za kosu
- Rowenta | Enjoy Technology
- Rowenta | Elettrodomestici per la casa
- Rowenta | Pequenos Eletrodomésticos | Aspiradores, Ferros de Engomar, Cuidado do Lar e Beleza
- Rowenta România | Fiare de călcat, aspiratoare și aparate de coafat
- Rowenta | Likalniki, sesalniki in sušilci za lase
- Rowenta | Enjoy Technology
- Побутова техніка для дому та техніка для персонального догляду| Офіційний сайт Rowenta Україна
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>